All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Clément Péron" <peron.clem@gmail.com>
To: Chen-Yu Tsai <wens@csie.org>, Takashi Iwai <tiwai@suse.com>,
	Jaroslav Kysela <perex@perex.cz>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com,
	"Clément Péron" <peron.clem@gmail.com>
Subject: [PATCH v2 4/5] arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1
Date: Fri, 19 Apr 2019 21:17:29 +0200	[thread overview]
Message-ID: <20190419191730.9437-5-peron.clem@gmail.com> (raw)
In-Reply-To: <20190419191730.9437-1-peron.clem@gmail.com>

Beelink GS1 board has a SPDIF out connector, so enable it in
the device-tree.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd60..76a95ad33dc5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -243,6 +243,10 @@
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&spdif {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: "Clément Péron" <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Takashi Iwai <tiwai-IBi9RG/b67k@public.gmane.org>,
	Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
	Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	"Clément Péron"
	<peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 4/5] arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1
Date: Fri, 19 Apr 2019 21:17:29 +0200	[thread overview]
Message-ID: <20190419191730.9437-5-peron.clem@gmail.com> (raw)
In-Reply-To: <20190419191730.9437-1-peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Beelink GS1 board has a SPDIF out connector, so enable it in
the device-tree.

Signed-off-by: Clément Péron <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd60..76a95ad33dc5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -243,6 +243,10 @@
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&spdif {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
-- 
2.17.1

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

WARNING: multiple messages have this Message-ID (diff)
From: "Clément Péron" <peron.clem@gmail.com>
To: Chen-Yu Tsai <wens@csie.org>, Takashi Iwai <tiwai@suse.com>,
	Jaroslav Kysela <perex@perex.cz>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	"Clément Péron" <peron.clem@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/5] arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1
Date: Fri, 19 Apr 2019 21:17:29 +0200	[thread overview]
Message-ID: <20190419191730.9437-5-peron.clem@gmail.com> (raw)
In-Reply-To: <20190419191730.9437-1-peron.clem@gmail.com>

Beelink GS1 board has a SPDIF out connector, so enable it in
the device-tree.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd60..76a95ad33dc5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -243,6 +243,10 @@
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&spdif {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-04-19 19:14 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-19 19:17 [PATCH v2 0/5] Allwinner H6 SPDIF support Clément Péron
2019-04-19 19:17 ` Clément Péron
2019-04-19 19:17 ` Clément Péron
2019-04-19 19:17 ` [PATCH v2 1/5] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-05-01 19:50   ` Rob Herring
2019-05-01 19:50     ` Rob Herring
2019-05-01 19:50     ` Rob Herring
2019-05-01 21:52   ` Rob Herring
2019-05-01 21:52     ` Rob Herring
2019-05-01 21:52     ` Rob Herring
2019-05-02  8:20   ` Maxime Ripard
2019-05-02  8:20     ` Maxime Ripard
2019-04-19 19:17 ` [PATCH v2 2/5] ASoC: sun4i-spdif: Add support for H6 SoC Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-05-02  8:25   ` Maxime Ripard
2019-05-02  8:25     ` Maxime Ripard
2019-05-02  8:25     ` Maxime Ripard
2019-05-02  9:39     ` Clément Péron
2019-05-02  9:39       ` Clément Péron
2019-05-02  9:39       ` Clément Péron
2019-05-03 14:54       ` Maxime Ripard
2019-05-03 14:54         ` Maxime Ripard
2019-05-03 14:54         ` Maxime Ripard
2019-04-19 19:17 ` [PATCH v2 3/5] arm64: dts: allwinner: Add SPDIF node for Allwinner H6 Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-04-19 19:17 ` Clément Péron [this message]
2019-04-19 19:17   ` [PATCH v2 4/5] arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1 Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-04-19 19:17 ` [PATCH v2 5/5] arm64: defconfig: Enable Sun4i SPDIF module Clément Péron
2019-04-19 19:17   ` Clément Péron
2019-04-19 19:17   ` Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190419191730.9437-5-peron.clem@gmail.com \
    --to=peron.clem@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.