All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
	Mike Turquette <mturquette@baylibre.com>,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Rob Herring" <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, "Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	"Antoine Tenart" <antoine.tenart@bootlin.com>,
	"Miquèl Raynal" <miquel.raynal@bootlin.com>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>
Subject: [PATCH v5 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
Date: Tue, 23 Apr 2019 10:33:54 +0200	[thread overview]
Message-ID: <20190423083354.17785-7-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20190423083354.17785-1-gregory.clement@bootlin.com>

Add cpu clock node on AP

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 2baafe12ebd4..472211159979 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -20,24 +20,28 @@
 			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 91dad7e4ee59..2db27c89427b 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -280,6 +280,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				cpu_clk: clock-cpu@0 {
+					compatible = "marvell,ap806-cpu-clock";
+					clocks = <&ap_clk 0>, <&ap_clk 1>;
+					#clock-cells = <1>;
+					reg = <0x0 0x1000>;
+				};
+
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
	Mike Turquette <mturquette@baylibre.com>,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, "Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Antoine Tenart" <antoine.tenart@bootlin.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Miquèl Raynal" <miquel.raynal@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>
Subject: [PATCH v5 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
Date: Tue, 23 Apr 2019 10:33:54 +0200	[thread overview]
Message-ID: <20190423083354.17785-7-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20190423083354.17785-1-gregory.clement@bootlin.com>

Add cpu clock node on AP

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 2baafe12ebd4..472211159979 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -20,24 +20,28 @@
 			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 91dad7e4ee59..2db27c89427b 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -280,6 +280,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				cpu_clk: clock-cpu@0 {
+					compatible = "marvell,ap806-cpu-clock";
+					clocks = <&ap_clk 0>, <&ap_clk 1>;
+					#clock-cells = <1>;
+					reg = <0x0 0x1000>;
+				};
+
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-04-23  8:34 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-23  8:33 [PATCH v5 0/6] Add CPU clock support for Armada 7K/8K Gregory CLEMENT
2019-04-23  8:33 ` Gregory CLEMENT
2019-04-23  8:33 ` [PATCH v5 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file Gregory CLEMENT
2019-04-23  8:33   ` Gregory CLEMENT
2019-04-23  8:33 ` [PATCH v5 2/6] clk: mvebu: add helper file for Armada AP and CP clocks Gregory CLEMENT
2019-04-23  8:33   ` Gregory CLEMENT
2019-04-23  8:33 ` [PATCH v5 3/6] clk: mvebu: add CPU clock driver for Armada 7K/8K Gregory CLEMENT
2019-04-23  8:33   ` Gregory CLEMENT
2019-04-23  8:33 ` [PATCH v5 4/6] clk: mvebu: ap806: Fix clock name for the cluster Gregory CLEMENT
2019-04-23  8:33   ` Gregory CLEMENT
2019-04-23  8:33 ` [PATCH v5 5/6] arm64: marvell: enable the Armada 7K/8K CPU clk driver Gregory CLEMENT
2019-04-23  8:33   ` Gregory CLEMENT
2019-04-23  8:33 ` Gregory CLEMENT [this message]
2019-04-23  8:33   ` [PATCH v5 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K Gregory CLEMENT
2019-04-23  9:51 [PATCH resend v5 0/6] Add CPU clock support for " Gregory CLEMENT
2019-04-23  9:51 ` [PATCH v5 6/6] arm64: dts: marvell: Add cpu clock node on " Gregory CLEMENT
2019-04-23  9:51   ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190423083354.17785-7-gregory.clement@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=antoine.tenart@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.chevallier@bootlin.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.