All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-pm@vger.kernel.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Lucas Stach <l.stach@pengutronix.de>,
	Chris Healy <cphealy@gmail.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Angus Ainslie <angus@akkea.ca>,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org
Subject: [PATCH v5 08/12] thermal: qoriq: Convert driver to use regmap API
Date: Tue, 23 Apr 2019 23:48:26 -0700	[thread overview]
Message-ID: <20190424064830.18179-9-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190424064830.18179-1-andrew.smirnov@gmail.com>

Convert driver to use regmap API, drop custom LE/BE IO helpers and
simplify bit manipulation using regmap_update_bits(). This also allows
us to convert some register initialization to use loops and adds
convenient debug access to TMU registers via debugfs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 159 +++++++++++++++-----------------
 1 file changed, 74 insertions(+), 85 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 64cad6d4c1d7..9774323a17bf 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -8,6 +8,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
@@ -17,75 +18,37 @@
 /*
  * QorIQ TMU Registers
  */
-struct qoriq_tmu_site_regs {
-	u32 tritsr;		/* Immediate Temperature Site Register */
-	u32 tratsr;		/* Average Temperature Site Register */
-	u8 res0[0x8];
-};
 
-struct qoriq_tmu_regs {
-	u32 tmr;		/* Mode Register */
+#define REGS_TMR	0x000	/* Mode Register */
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
-	u32 tsr;		/* Status Register */
-	u32 tmtmir;		/* Temperature measurement interval Register */
+
+#define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
-	u8 res0[0x14];
-	u32 tier;		/* Interrupt Enable Register */
+
+#define REGS_TIER	0x020	/* Interrupt Enable Register */
 #define TIER_DISABLE	0x0
-	u32 tidr;		/* Interrupt Detect Register */
-	u32 tiscr;		/* Interrupt Site Capture Register */
-	u32 ticscr;		/* Interrupt Critical Site Capture Register */
-	u8 res1[0x10];
-	u32 tmhtcrh;		/* High Temperature Capture Register */
-	u32 tmhtcrl;		/* Low Temperature Capture Register */
-	u8 res2[0x8];
-	u32 tmhtitr;		/* High Temperature Immediate Threshold */
-	u32 tmhtatr;		/* High Temperature Average Threshold */
-	u32 tmhtactr;	/* High Temperature Average Crit Threshold */
-	u8 res3[0x24];
-	u32 ttcfgr;		/* Temperature Configuration Register */
-	u32 tscfgr;		/* Sensor Configuration Register */
-	u8 res4[0x78];
-	struct qoriq_tmu_site_regs site[SITES_MAX];
-	u8 res5[0x9f8];
-	u32 ipbrr0;		/* IP Block Revision Register 0 */
-	u32 ipbrr1;		/* IP Block Revision Register 1 */
-	u8 res6[0x310];
-	u32 ttr0cr;		/* Temperature Range 0 Control Register */
-	u32 ttr1cr;		/* Temperature Range 1 Control Register */
-	u32 ttr2cr;		/* Temperature Range 2 Control Register */
-	u32 ttr3cr;		/* Temperature Range 3 Control Register */
-};
 
+#define REGS_TTCFGR	0x080	/* Temperature Configuration Register */
+#define REGS_TSCFGR	0x084	/* Sensor Configuration Register */
+
+#define REGS_TRITSR(n)	(0x100 + 16 * (n)) /* Immediate Temperature
+					    * Site Register
+					    */
+#define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
+					   * Control Register
+					   */
 struct qoriq_tmu_data {
-	struct qoriq_tmu_regs __iomem *regs;
-	bool little_endian;
+	struct regmap *regmap;
 };
 
-static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
-{
-	if (p->little_endian)
-		iowrite32(val, addr);
-	else
-		iowrite32be(val, addr);
-}
-
-static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
-{
-	if (p->little_endian)
-		return ioread32(addr);
-	else
-		return ioread32be(addr);
-}
-
 static int tmu_get_temp(int id, void *p, int *temp)
 {
 	struct qoriq_tmu_data *qdata = p;
 	u32 val;
 
-	val = tmu_read(qdata, &qdata->regs->site[id].tritsr);
+	regmap_read(qdata->regmap, REGS_TRITSR(id), &val);
 	*temp = (val & 0xff) * 1000;
 
 	return 0;
@@ -117,7 +80,8 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 
 	/* Enable monitoring */
 	if (sites != 0)
-		tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
+		regmap_write(qdata->regmap, REGS_TMR,
+			     sites | TMR_ME | TMR_ALPF);
 
 	return 0;
 }
@@ -136,10 +100,8 @@ static int qoriq_tmu_calibration(struct device *dev,
 	}
 
 	/* Init temperature range registers */
-	tmu_write(data, range[0], &data->regs->ttr0cr);
-	tmu_write(data, range[1], &data->regs->ttr1cr);
-	tmu_write(data, range[2], &data->regs->ttr2cr);
-	tmu_write(data, range[3], &data->regs->ttr3cr);
+	for (i = 0; i < ARRAY_SIZE(range); i++)
+		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
@@ -149,9 +111,9 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 	for (i = 0; i < len; i += 8, calibration += 2) {
 		val = of_read_number(calibration, 1);
-		tmu_write(data, val, &data->regs->ttcfgr);
+		regmap_write(data->regmap, REGS_TTCFGR, val);
 		val = of_read_number(calibration + 1, 1);
-		tmu_write(data, val, &data->regs->tscfgr);
+		regmap_write(data->regmap, REGS_TSCFGR, val);
 	}
 
 	return 0;
@@ -160,15 +122,32 @@ static int qoriq_tmu_calibration(struct device *dev,
 static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 {
 	/* Disable interrupt, using polling instead */
-	tmu_write(data, TIER_DISABLE, &data->regs->tier);
+	regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
 
 	/* Set update_interval */
-	tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+	regmap_write(data->regmap, REGS_TMTMIR, TMTMIR_DEFAULT);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 }
 
+static const struct regmap_range qoriq_yes_ranges[] = {
+	regmap_reg_range(REGS_TMR, REGS_TSCFGR),
+	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
+	/* Read only registers below */
+	regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
+};
+
+static const struct regmap_access_table qoriq_wr_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges) - 1,
+};
+
+static const struct regmap_access_table qoriq_rd_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges),
+};
+
 static int qoriq_tmu_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -176,26 +155,44 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct resource *io;
+	const bool little_endian = of_property_read_bool(np, "little-endian");
+	const enum regmap_endian format_endian =
+		little_endian ? REGMAP_ENDIAN_LITTLE : REGMAP_ENDIAN_BIG;
+	const struct regmap_config regmap_config = {
+		.reg_bits		= 32,
+		.val_bits		= 32,
+		.reg_stride		= 4,
+		.rd_table		= &qoriq_rd_table,
+		.wr_table		= &qoriq_wr_table,
+		.val_format_endian	= format_endian,
+		.max_register		= SZ_4K,
+	};
+	void __iomem *base;
 
 	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	data->little_endian = of_property_read_bool(np, "little-endian");
-
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!io) {
 		dev_err(dev, "Failed to get memory region\n");
 		return -ENODEV;
 	}
 
-	data->regs = devm_ioremap(dev, io->start, resource_size(io));
-	if (!data->regs) {
+	base = devm_ioremap(dev, io->start, resource_size(io));
+	if (!base) {
 		dev_err(dev, "Failed to get memory region\n");
 		return -ENODEV;
 	}
 
+	data->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+	if (IS_ERR(data->regmap)) {
+		ret = PTR_ERR(data->regmap);
+		dev_err(dev, "Failed to init regmap (%d)\n", ret);
+		return ret;
+	}
+
 	qoriq_tmu_init_device(data);	/* TMU initialization */
 
 	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
@@ -218,7 +215,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 
 	platform_set_drvdata(pdev, NULL);
 
@@ -226,30 +223,22 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int qoriq_tmu_suspend(struct device *dev)
+
+static int qoriq_tmu_suspend_resume(struct device *dev, unsigned int val)
 {
-	u32 tmr;
 	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
 
-	/* Disable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr &= ~TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
+	return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, val);
+}
 
-	return 0;
+static int qoriq_tmu_suspend(struct device *dev)
+{
+	return qoriq_tmu_suspend_resume(dev, 0);
 }
 
 static int qoriq_tmu_resume(struct device *dev)
 {
-	u32 tmr;
-	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
-
-	/* Enable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr |= TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
-
-	return 0;
+	return qoriq_tmu_suspend_resume(dev, TMR_ME);
 }
 #endif
 
-- 
2.20.1


  parent reply	other threads:[~2019-04-24  6:49 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24  6:48 [PATCH v5 00/12] QorIQ TMU multi-sensor and HWMON support Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 01/12] thermal: qoriq: Remove unnecessary DT node is NULL check Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 02/12] thermal: qoriq: Add local struct device pointer Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 03/12] thermal: qoriq: Don't store struct thermal_zone_device reference Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 04/12] thermal: qoriq: Drop per-sensor data Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 05/12] thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 06/12] thermal: qoriq: Pass data to qoriq_tmu_calibration() directly Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 07/12] thermal: qoriq: Convert driver to use devm_ioremap() Andrey Smirnov
2019-04-24  6:48 ` Andrey Smirnov [this message]
2019-04-24  6:48 ` [PATCH v5 09/12] thermal: qoriq: Enable all sensors before registering them Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 10/12] thermal: qoriq: Do not report invalid temperature reading Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 11/12] thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() Andrey Smirnov
2019-04-24  6:48 ` [PATCH v5 12/12] thermal: qoriq: Add hwmon support Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190424064830.18179-9-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=angus@akkea.ca \
    --cc=cphealy@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=edubezval@gmail.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.