From: Goldwyn Rodrigues <rgoldwyn@suse.de> To: linux-btrfs@vger.kernel.org Cc: kilobyte@angband.pl, jack@suse.cz, darrick.wong@oracle.com, nborisov@suse.com, linux-nvdimm@lists.01.org, david@fromorbit.com, dsterba@suse.cz, willy@infradead.org, linux-fsdevel@vger.kernel.org, hch@lst.de, Goldwyn Rodrigues <rgoldwyn@suse.com> Subject: [PATCH 01/18] btrfs: create a mount option for dax Date: Mon, 29 Apr 2019 12:26:32 -0500 [thread overview] Message-ID: <20190429172649.8288-2-rgoldwyn@suse.de> (raw) In-Reply-To: <20190429172649.8288-1-rgoldwyn@suse.de> From: Goldwyn Rodrigues <rgoldwyn@suse.com> This sets S_DAX in inode->i_flags, which can be used with IS_DAX(). The dax option is restricted to non multi-device mounts. dax interacts with the device directly instead of using bio, so all bio-hooks which we use for multi-device cannot be performed here. While regular read/writes could be manipulated with RAID0/1, mmap() is still an issue. Auto-setting free space tree, because dealing with free space inode (specifically readpages) is a nightmare. Auto-setting nodatasum because we don't get callback for writing checksums after mmap()s. Deny compression because it does not go with direct I/O. Store the dax_device in fs_info which will be used in iomap code. I am aware of the push to directory-based flags for dax. Until, that code is in the kernel, we will work with mount flags. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> --- fs/btrfs/ctree.h | 2 ++ fs/btrfs/disk-io.c | 4 ++++ fs/btrfs/ioctl.c | 5 ++++- fs/btrfs/super.c | 30 ++++++++++++++++++++++++++++++ 4 files changed, 40 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b3642367a595..8ca1c0d120f4 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1067,6 +1067,7 @@ struct btrfs_fs_info { u32 metadata_ratio; void *bdev_holder; + struct dax_device *dax_dev; /* private scrub information */ struct mutex scrub_lock; @@ -1442,6 +1443,7 @@ static inline u32 BTRFS_MAX_XATTR_SIZE(const struct btrfs_fs_info *info) #define BTRFS_MOUNT_FREE_SPACE_TREE (1 << 26) #define BTRFS_MOUNT_NOLOGREPLAY (1 << 27) #define BTRFS_MOUNT_REF_VERIFY (1 << 28) +#define BTRFS_MOUNT_DAX (1 << 29) #define BTRFS_DEFAULT_COMMIT_INTERVAL (30) #define BTRFS_DEFAULT_MAX_INLINE (2048) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 6fe9197f6ee4..2bbb63b2fcff 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -16,6 +16,7 @@ #include <linux/uuid.h> #include <linux/semaphore.h> #include <linux/error-injection.h> +#include <linux/dax.h> #include <linux/crc32c.h> #include <linux/sched/mm.h> #include <asm/unaligned.h> @@ -2805,6 +2806,8 @@ int open_ctree(struct super_block *sb, goto fail_alloc; } + fs_info->dax_dev = fs_dax_get_by_bdev(fs_devices->latest_bdev); + /* * We want to check superblock checksum, the type is stored inside. * Pass the whole disk block of size BTRFS_SUPER_INFO_SIZE (4k). @@ -4043,6 +4046,7 @@ void close_ctree(struct btrfs_fs_info *fs_info) #endif btrfs_close_devices(fs_info->fs_devices); + fs_put_dax(fs_info->dax_dev); btrfs_mapping_tree_free(&fs_info->mapping_tree); percpu_counter_destroy(&fs_info->dirty_metadata_bytes); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index cd4e693406a0..0138119cd9a3 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -149,8 +149,11 @@ void btrfs_sync_inode_flags_to_i_flags(struct inode *inode) if (binode->flags & BTRFS_INODE_DIRSYNC) new_fl |= S_DIRSYNC; + if ((btrfs_test_opt(btrfs_sb(inode->i_sb), DAX)) && S_ISREG(inode->i_mode)) + new_fl |= S_DAX; + set_mask_bits(&inode->i_flags, - S_SYNC | S_APPEND | S_IMMUTABLE | S_NOATIME | S_DIRSYNC, + S_SYNC | S_APPEND | S_IMMUTABLE | S_NOATIME | S_DIRSYNC | S_DAX, new_fl); } diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 120e4340792a..3b85e61e5182 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -326,6 +326,7 @@ enum { Opt_treelog, Opt_notreelog, Opt_usebackuproot, Opt_user_subvol_rm_allowed, + Opt_dax, /* Deprecated options */ Opt_alloc_start, @@ -393,6 +394,7 @@ static const match_table_t tokens = { {Opt_notreelog, "notreelog"}, {Opt_usebackuproot, "usebackuproot"}, {Opt_user_subvol_rm_allowed, "user_subvol_rm_allowed"}, + {Opt_dax, "dax"}, /* Deprecated options */ {Opt_alloc_start, "alloc_start=%s"}, @@ -745,6 +747,32 @@ int btrfs_parse_options(struct btrfs_fs_info *info, char *options, case Opt_user_subvol_rm_allowed: btrfs_set_opt(info->mount_opt, USER_SUBVOL_RM_ALLOWED); break; + case Opt_dax: +#ifdef CONFIG_FS_DAX + if (btrfs_super_num_devices(info->super_copy) > 1) { + btrfs_info(info, + "dax not supported for multi-device btrfs partition\n"); + ret = -EOPNOTSUPP; + goto out; + } + btrfs_set_opt(info->mount_opt, DAX); + btrfs_warn(info, "DAX enabled. Warning: EXPERIMENTAL, use at your own risk\n"); + btrfs_set_and_info(info, NODATASUM, + "auto-setting nodatasum (dax)"); + btrfs_clear_opt(info->mount_opt, SPACE_CACHE); + btrfs_set_and_info(info, FREE_SPACE_TREE, + "auto-setting free space tree (dax)"); + if (btrfs_test_opt(info, COMPRESS)) { + btrfs_info(info, "disabling compress (dax)"); + btrfs_clear_opt(info->mount_opt, COMPRESS); + } + break; +#else + btrfs_err(info, + "DAX option not supported\n"); + ret = -EINVAL; + goto out; +#endif case Opt_enospc_debug: btrfs_set_opt(info->mount_opt, ENOSPC_DEBUG); break; @@ -1335,6 +1363,8 @@ static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry) seq_puts(seq, ",clear_cache"); if (btrfs_test_opt(info, USER_SUBVOL_RM_ALLOWED)) seq_puts(seq, ",user_subvol_rm_allowed"); + if (btrfs_test_opt(info, DAX)) + seq_puts(seq, ",dax"); if (btrfs_test_opt(info, ENOSPC_DEBUG)) seq_puts(seq, ",enospc_debug"); if (btrfs_test_opt(info, AUTO_DEFRAG)) -- 2.16.4 _______________________________________________ Linux-nvdimm mailing list Linux-nvdimm@lists.01.org https://lists.01.org/mailman/listinfo/linux-nvdimm
WARNING: multiple messages have this Message-ID (diff)
From: Goldwyn Rodrigues <rgoldwyn@suse.de> To: linux-btrfs@vger.kernel.org Cc: kilobyte@angband.pl, linux-fsdevel@vger.kernel.org, jack@suse.cz, david@fromorbit.com, willy@infradead.org, hch@lst.de, darrick.wong@oracle.com, dsterba@suse.cz, nborisov@suse.com, linux-nvdimm@lists.01.org, Goldwyn Rodrigues <rgoldwyn@suse.com> Subject: [PATCH 01/18] btrfs: create a mount option for dax Date: Mon, 29 Apr 2019 12:26:32 -0500 [thread overview] Message-ID: <20190429172649.8288-2-rgoldwyn@suse.de> (raw) In-Reply-To: <20190429172649.8288-1-rgoldwyn@suse.de> From: Goldwyn Rodrigues <rgoldwyn@suse.com> This sets S_DAX in inode->i_flags, which can be used with IS_DAX(). The dax option is restricted to non multi-device mounts. dax interacts with the device directly instead of using bio, so all bio-hooks which we use for multi-device cannot be performed here. While regular read/writes could be manipulated with RAID0/1, mmap() is still an issue. Auto-setting free space tree, because dealing with free space inode (specifically readpages) is a nightmare. Auto-setting nodatasum because we don't get callback for writing checksums after mmap()s. Deny compression because it does not go with direct I/O. Store the dax_device in fs_info which will be used in iomap code. I am aware of the push to directory-based flags for dax. Until, that code is in the kernel, we will work with mount flags. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> --- fs/btrfs/ctree.h | 2 ++ fs/btrfs/disk-io.c | 4 ++++ fs/btrfs/ioctl.c | 5 ++++- fs/btrfs/super.c | 30 ++++++++++++++++++++++++++++++ 4 files changed, 40 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b3642367a595..8ca1c0d120f4 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1067,6 +1067,7 @@ struct btrfs_fs_info { u32 metadata_ratio; void *bdev_holder; + struct dax_device *dax_dev; /* private scrub information */ struct mutex scrub_lock; @@ -1442,6 +1443,7 @@ static inline u32 BTRFS_MAX_XATTR_SIZE(const struct btrfs_fs_info *info) #define BTRFS_MOUNT_FREE_SPACE_TREE (1 << 26) #define BTRFS_MOUNT_NOLOGREPLAY (1 << 27) #define BTRFS_MOUNT_REF_VERIFY (1 << 28) +#define BTRFS_MOUNT_DAX (1 << 29) #define BTRFS_DEFAULT_COMMIT_INTERVAL (30) #define BTRFS_DEFAULT_MAX_INLINE (2048) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 6fe9197f6ee4..2bbb63b2fcff 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -16,6 +16,7 @@ #include <linux/uuid.h> #include <linux/semaphore.h> #include <linux/error-injection.h> +#include <linux/dax.h> #include <linux/crc32c.h> #include <linux/sched/mm.h> #include <asm/unaligned.h> @@ -2805,6 +2806,8 @@ int open_ctree(struct super_block *sb, goto fail_alloc; } + fs_info->dax_dev = fs_dax_get_by_bdev(fs_devices->latest_bdev); + /* * We want to check superblock checksum, the type is stored inside. * Pass the whole disk block of size BTRFS_SUPER_INFO_SIZE (4k). @@ -4043,6 +4046,7 @@ void close_ctree(struct btrfs_fs_info *fs_info) #endif btrfs_close_devices(fs_info->fs_devices); + fs_put_dax(fs_info->dax_dev); btrfs_mapping_tree_free(&fs_info->mapping_tree); percpu_counter_destroy(&fs_info->dirty_metadata_bytes); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index cd4e693406a0..0138119cd9a3 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -149,8 +149,11 @@ void btrfs_sync_inode_flags_to_i_flags(struct inode *inode) if (binode->flags & BTRFS_INODE_DIRSYNC) new_fl |= S_DIRSYNC; + if ((btrfs_test_opt(btrfs_sb(inode->i_sb), DAX)) && S_ISREG(inode->i_mode)) + new_fl |= S_DAX; + set_mask_bits(&inode->i_flags, - S_SYNC | S_APPEND | S_IMMUTABLE | S_NOATIME | S_DIRSYNC, + S_SYNC | S_APPEND | S_IMMUTABLE | S_NOATIME | S_DIRSYNC | S_DAX, new_fl); } diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 120e4340792a..3b85e61e5182 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -326,6 +326,7 @@ enum { Opt_treelog, Opt_notreelog, Opt_usebackuproot, Opt_user_subvol_rm_allowed, + Opt_dax, /* Deprecated options */ Opt_alloc_start, @@ -393,6 +394,7 @@ static const match_table_t tokens = { {Opt_notreelog, "notreelog"}, {Opt_usebackuproot, "usebackuproot"}, {Opt_user_subvol_rm_allowed, "user_subvol_rm_allowed"}, + {Opt_dax, "dax"}, /* Deprecated options */ {Opt_alloc_start, "alloc_start=%s"}, @@ -745,6 +747,32 @@ int btrfs_parse_options(struct btrfs_fs_info *info, char *options, case Opt_user_subvol_rm_allowed: btrfs_set_opt(info->mount_opt, USER_SUBVOL_RM_ALLOWED); break; + case Opt_dax: +#ifdef CONFIG_FS_DAX + if (btrfs_super_num_devices(info->super_copy) > 1) { + btrfs_info(info, + "dax not supported for multi-device btrfs partition\n"); + ret = -EOPNOTSUPP; + goto out; + } + btrfs_set_opt(info->mount_opt, DAX); + btrfs_warn(info, "DAX enabled. Warning: EXPERIMENTAL, use at your own risk\n"); + btrfs_set_and_info(info, NODATASUM, + "auto-setting nodatasum (dax)"); + btrfs_clear_opt(info->mount_opt, SPACE_CACHE); + btrfs_set_and_info(info, FREE_SPACE_TREE, + "auto-setting free space tree (dax)"); + if (btrfs_test_opt(info, COMPRESS)) { + btrfs_info(info, "disabling compress (dax)"); + btrfs_clear_opt(info->mount_opt, COMPRESS); + } + break; +#else + btrfs_err(info, + "DAX option not supported\n"); + ret = -EINVAL; + goto out; +#endif case Opt_enospc_debug: btrfs_set_opt(info->mount_opt, ENOSPC_DEBUG); break; @@ -1335,6 +1363,8 @@ static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry) seq_puts(seq, ",clear_cache"); if (btrfs_test_opt(info, USER_SUBVOL_RM_ALLOWED)) seq_puts(seq, ",user_subvol_rm_allowed"); + if (btrfs_test_opt(info, DAX)) + seq_puts(seq, ",dax"); if (btrfs_test_opt(info, ENOSPC_DEBUG)) seq_puts(seq, ",enospc_debug"); if (btrfs_test_opt(info, AUTO_DEFRAG)) -- 2.16.4
next prev parent reply other threads:[~2019-04-29 17:27 UTC|newest] Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-29 17:26 [PATCH v4 00/18] btrfs dax support Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues [this message] 2019-04-29 17:26 ` [PATCH 01/18] btrfs: create a mount option for dax Goldwyn Rodrigues 2019-05-21 18:02 ` Darrick J. Wong 2019-05-21 18:02 ` Darrick J. Wong 2019-04-29 17:26 ` [PATCH 02/18] btrfs: Carve out btrfs_get_extent_map_write() out of btrfs_get_blocks_write() Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 04/18] dax: Introduce IOMAP_DAX_COW to CoW edges during writes Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-05-21 16:51 ` Darrick J. Wong 2019-05-22 20:14 ` Goldwyn Rodrigues 2019-05-22 20:14 ` Goldwyn Rodrigues 2019-05-23 2:10 ` Dave Chinner 2019-05-23 2:10 ` Dave Chinner 2019-05-23 9:05 ` Shiyang Ruan 2019-05-23 9:05 ` Shiyang Ruan 2019-05-23 11:51 ` Goldwyn Rodrigues 2019-05-23 11:51 ` Goldwyn Rodrigues 2019-05-27 8:25 ` Shiyang Ruan 2019-05-27 8:25 ` Shiyang Ruan 2019-05-28 9:17 ` Jan Kara 2019-05-28 9:17 ` Jan Kara 2019-05-29 2:01 ` Shiyang Ruan 2019-05-29 2:01 ` Shiyang Ruan 2019-05-29 2:47 ` Dave Chinner 2019-05-29 2:47 ` Dave Chinner 2019-05-29 4:02 ` Shiyang Ruan 2019-05-29 4:02 ` Shiyang Ruan 2019-05-29 4:07 ` Darrick J. Wong 2019-05-29 4:07 ` Darrick J. Wong 2019-05-29 4:46 ` Dave Chinner 2019-05-29 4:46 ` Dave Chinner 2019-05-29 13:46 ` Jan Kara 2019-05-29 13:46 ` Jan Kara 2019-05-29 22:14 ` Dave Chinner 2019-05-29 22:14 ` Dave Chinner 2019-05-30 11:16 ` Jan Kara 2019-05-30 11:16 ` Jan Kara 2019-05-30 22:59 ` Dave Chinner 2019-05-30 22:59 ` Dave Chinner 2019-04-29 17:26 ` [PATCH 05/18] btrfs: return whether extent is nocow or not Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 06/18] btrfs: Rename __endio_write_update_ordered() to btrfs_update_ordered_extent() Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues [not found] ` <20190429172649.8288-1-rgoldwyn-l3A5Bk7waGM@public.gmane.org> 2019-04-29 17:26 ` [PATCH 03/18] btrfs: basic dax read Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues [not found] ` <20190429172649.8288-4-rgoldwyn-l3A5Bk7waGM@public.gmane.org> 2019-05-21 15:14 ` Darrick J. Wong 2019-05-21 15:14 ` Darrick J. Wong 2019-05-22 21:50 ` Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 07/18] btrfs: add dax write support Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues [not found] ` <20190429172649.8288-8-rgoldwyn-l3A5Bk7waGM@public.gmane.org> 2019-05-21 17:08 ` Darrick J. Wong 2019-05-21 17:08 ` Darrick J. Wong 2019-04-29 17:26 ` [PATCH 13/18] fs: dedup file range to use a compare function Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues [not found] ` <20190429172649.8288-14-rgoldwyn-l3A5Bk7waGM@public.gmane.org> 2019-05-21 18:17 ` Darrick J. Wong 2019-05-21 18:17 ` Darrick J. Wong 2019-04-29 17:26 ` [PATCH 18/18] btrfs: trace functions for btrfs_iomap_begin/end Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 08/18] dax: memcpy page in case of IOMAP_DAX_COW for mmap faults Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-05-21 17:46 ` Darrick J. Wong 2019-05-21 17:46 ` Darrick J. Wong 2019-05-22 19:11 ` Goldwyn Rodrigues 2019-05-22 19:11 ` Goldwyn Rodrigues 2019-05-23 4:02 ` Darrick J. Wong 2019-05-23 4:02 ` Darrick J. Wong 2019-05-23 12:10 ` Jan Kara 2019-05-23 12:10 ` Jan Kara 2019-04-29 17:26 ` [PATCH 09/18] btrfs: Add dax specific address_space_operations Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 10/18] dax: replace mmap entry in case of CoW Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-05-21 17:35 ` Darrick J. Wong 2019-05-21 17:35 ` Darrick J. Wong 2019-05-23 13:38 ` Jan Kara 2019-05-23 13:38 ` Jan Kara 2019-04-29 17:26 ` [PATCH 11/18] btrfs: add dax mmap support Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 12/18] btrfs: allow MAP_SYNC mmap Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-05-10 15:32 ` [PATCH for-goldwyn] btrfs: disallow MAP_SYNC outside of DAX mounts Adam Borowski 2019-05-10 15:32 ` Adam Borowski 2019-05-10 15:41 ` Dan Williams 2019-05-10 15:41 ` Dan Williams 2019-05-10 15:59 ` Pankaj Gupta 2019-05-10 15:59 ` Pankaj Gupta 2019-05-23 13:44 ` [PATCH 12/18] btrfs: allow MAP_SYNC mmap Jan Kara 2019-05-23 13:44 ` Jan Kara 2019-05-23 16:19 ` Adam Borowski 2019-05-23 16:19 ` Adam Borowski 2019-04-29 17:26 ` [PATCH 14/18] dax: memcpy before zeroing range Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-05-21 17:27 ` Darrick J. Wong 2019-05-21 17:27 ` Darrick J. Wong 2019-04-29 17:26 ` [PATCH 15/18] btrfs: handle dax page zeroing Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 16/18] btrfs: Writeprotect mmap pages on snapshot Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues 2019-05-23 14:04 ` Jan Kara 2019-05-23 14:04 ` Jan Kara 2019-05-23 15:27 ` Goldwyn Rodrigues 2019-05-23 15:27 ` Goldwyn Rodrigues 2019-05-23 19:07 ` Jan Kara 2019-05-23 19:07 ` Jan Kara 2019-05-23 21:22 ` Goldwyn Rodrigues 2019-05-23 21:22 ` Goldwyn Rodrigues 2019-04-29 17:26 ` [PATCH 17/18] btrfs: Disable dax-based defrag and send Goldwyn Rodrigues 2019-04-29 17:26 ` Goldwyn Rodrigues -- strict thread matches above, loose matches on Subject: below -- 2019-04-16 16:41 [PATCH v3 00/18] btrfs dax support Goldwyn Rodrigues 2019-04-16 16:41 ` [PATCH 01/18] btrfs: create a mount option for dax Goldwyn Rodrigues 2019-04-16 16:41 ` Goldwyn Rodrigues 2019-04-16 16:52 ` Dan Williams 2019-04-16 16:52 ` Dan Williams
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190429172649.8288-2-rgoldwyn@suse.de \ --to=rgoldwyn@suse.de \ --cc=darrick.wong@oracle.com \ --cc=david@fromorbit.com \ --cc=dsterba@suse.cz \ --cc=hch@lst.de \ --cc=jack@suse.cz \ --cc=kilobyte@angband.pl \ --cc=linux-btrfs@vger.kernel.org \ --cc=linux-fsdevel@vger.kernel.org \ --cc=linux-nvdimm@lists.01.org \ --cc=nborisov@suse.com \ --cc=rgoldwyn@suse.com \ --cc=willy@infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.