All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yangtao Li <tiny.windzz@gmail.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	maxime.ripard@bootlin.com, wens@csie.org, jic23@kernel.org,
	knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	Yangtao Li <tiny.windzz@gmail.com>
Subject: [PATCH 5/7] dt-bindings: mfd: Add H6 GPADC binding
Date: Fri,  3 May 2019 03:28:11 -0400	[thread overview]
Message-ID: <20190503072813.2719-6-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190503072813.2719-1-tiny.windzz@gmail.com>

This patch adds documentation for the H6 GPADC binding.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 .../devicetree/bindings/mfd/sun4i-gpadc.txt   | 27 +++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
index 86dd8191b04c..eeaf27eb8abd 100644
--- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
@@ -5,11 +5,22 @@ and sometimes as a touchscreen controller.
 
 Required properties:
   - compatible: "allwinner,sun8i-a33-ths",
+		"allwinner,sun50i-h6-ths",
   - reg: mmio address range of the chip,
-  - #thermal-sensor-cells: shall be 0,
+  - #thermal-sensor-cells: shall be 0 for sun8i-a33-ths,
+			   shall be 1 for sun50i-h6-ths,
   - #io-channel-cells: shall be 0,
 
-Example:
+Optional properties:
+  - clocks: Must contain an entry for each entry in clock-names.
+	    See common clock-bindings.txt for details.
+  - clock-names: A list of clock names. For sun50i-h6-ths, it must contain
+		 "bus".
+  - resets: Must contain an entry for each entry in reset-names.
+	    See ../reset/reset.txt for details.
+  - reset-names: For sun50i-h6-ths, it must contain "bus".
+
+Example1:
 	ths: ths@1c25000 {
 		compatible = "allwinner,sun8i-a33-ths";
 		reg = <0x01c25000 0x100>;
@@ -17,6 +28,18 @@ Example:
 		#io-channel-cells = <0>;
 	};
 
+Example2:
+	ths: ths@1c25000 {
+		compatible = "allwinner,sun50i-h6-ths";
+		reg = <0x05070400 0x100>;
+		clocks = <&ccu CLK_BUS_THS>;
+		clock-names = "bus";
+		resets = <&ccu RST_BUS_THS>;
+		reset-names = "bus";
+		#thermal-sensor-cells = <1>;
+		#io-channel-cells = <0>;
+       };
+
 sun4i, sun5i and sun6i SoCs are also supported via the older binding:
 
 sun4i resistive touchscreen controller
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Yangtao Li <tiny.windzz@gmail.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	maxime.ripard@bootlin.com, wens@csie.org, jic23@kernel.org,
	knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	Yangtao Li <tiny.windzz@gmail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/7] dt-bindings: mfd: Add H6 GPADC binding
Date: Fri,  3 May 2019 03:28:11 -0400	[thread overview]
Message-ID: <20190503072813.2719-6-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190503072813.2719-1-tiny.windzz@gmail.com>

This patch adds documentation for the H6 GPADC binding.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 .../devicetree/bindings/mfd/sun4i-gpadc.txt   | 27 +++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
index 86dd8191b04c..eeaf27eb8abd 100644
--- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
@@ -5,11 +5,22 @@ and sometimes as a touchscreen controller.
 
 Required properties:
   - compatible: "allwinner,sun8i-a33-ths",
+		"allwinner,sun50i-h6-ths",
   - reg: mmio address range of the chip,
-  - #thermal-sensor-cells: shall be 0,
+  - #thermal-sensor-cells: shall be 0 for sun8i-a33-ths,
+			   shall be 1 for sun50i-h6-ths,
   - #io-channel-cells: shall be 0,
 
-Example:
+Optional properties:
+  - clocks: Must contain an entry for each entry in clock-names.
+	    See common clock-bindings.txt for details.
+  - clock-names: A list of clock names. For sun50i-h6-ths, it must contain
+		 "bus".
+  - resets: Must contain an entry for each entry in reset-names.
+	    See ../reset/reset.txt for details.
+  - reset-names: For sun50i-h6-ths, it must contain "bus".
+
+Example1:
 	ths: ths@1c25000 {
 		compatible = "allwinner,sun8i-a33-ths";
 		reg = <0x01c25000 0x100>;
@@ -17,6 +28,18 @@ Example:
 		#io-channel-cells = <0>;
 	};
 
+Example2:
+	ths: ths@1c25000 {
+		compatible = "allwinner,sun50i-h6-ths";
+		reg = <0x05070400 0x100>;
+		clocks = <&ccu CLK_BUS_THS>;
+		clock-names = "bus";
+		resets = <&ccu RST_BUS_THS>;
+		reset-names = "bus";
+		#thermal-sensor-cells = <1>;
+		#io-channel-cells = <0>;
+       };
+
 sun4i, sun5i and sun6i SoCs are also supported via the older binding:
 
 sun4i resistive touchscreen controller
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-05-03  7:28 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-03  7:28 [PATCH 0/7] Add support for H6 thermal sensor Yangtao Li
2019-05-03  7:28 ` Yangtao Li
2019-05-03  7:28 ` [PATCH 1/7] iio: adc: sun4i-gpadc: rework for support multiple " Yangtao Li
2019-05-03  7:28   ` Yangtao Li
2019-05-05 15:22   ` Jonathan Cameron
2019-05-05 15:22     ` Jonathan Cameron
2019-05-05 15:22     ` Jonathan Cameron
2019-05-06 12:28     ` Maxime Ripard
2019-05-06 12:28       ` Maxime Ripard
2019-05-06 16:52       ` Icenowy Zheng
2019-05-06 16:52         ` Icenowy Zheng
2019-05-06 17:08         ` Frank Lee
2019-05-06 17:08           ` Frank Lee
2019-05-06 17:55           ` Ondřej Jirman
2019-05-06 17:55             ` Ondřej Jirman
2019-05-07 13:59             ` Maxime Ripard
2019-05-07 13:59               ` Maxime Ripard
2019-05-03  7:28 ` [PATCH 2/7] iio: adc: sun4i-gpadc: introduce temp_data in gpadc_data Yangtao Li
2019-05-03  7:28   ` Yangtao Li
2019-05-03  7:28 ` [PATCH 3/7] iio: adc: sun4i-gpadc: introduce gpadc_enable and gpadc_disable " Yangtao Li
2019-05-03  7:28   ` Yangtao Li
2019-05-03  7:28 ` [PATCH 4/7] iio: adc: sun4i-gpadc-iio: support clocks and reset Yangtao Li
2019-05-03  7:28   ` Yangtao Li
2019-05-03  7:28 ` Yangtao Li [this message]
2019-05-03  7:28   ` [PATCH 5/7] dt-bindings: mfd: Add H6 GPADC binding Yangtao Li
2019-05-08 11:44   ` Lee Jones
2019-05-08 11:44     ` Lee Jones
2019-05-03  7:28 ` [PATCH 6/7] iio: adc: sun4i-gpadc-iio: add support for H6 thermal sensor Yangtao Li
2019-05-03  7:28   ` Yangtao Li
2019-05-05 15:25   ` Jonathan Cameron
2019-05-05 15:25     ` Jonathan Cameron
2019-05-08 11:45   ` Lee Jones
2019-05-08 11:45     ` Lee Jones
2019-05-03  7:28 ` [PATCH 7/7] iio: adc: sun4i-gpadc-iio convert to SPDX license tags Yangtao Li
2019-05-03  7:28   ` Yangtao Li
2019-05-03  9:18   ` Maxime Ripard
2019-05-03  9:18     ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190503072813.2719-6-tiny.windzz@gmail.com \
    --to=tiny.windzz@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.