All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>,
	"Amit Daniel Kachhap" <amit.kachhap@arm.com>,
	"Andrew Jones" <drjones@redhat.com>,
	"Andrew Murray" <andrew.murray@arm.com>,
	"Christoffer Dall" <christoffer.dall@arm.com>,
	"Dave Martin" <Dave.Martin@arm.com>,
	"Julien Grall" <julien.grall@arm.com>,
	"Julien Thierry" <julien.thierry@arm.com>,
	"Kristina Martsenko" <kristina.martsenko@arm.com>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Suzuki K Poulose" <suzuki.poulose@arm.com>,
	"Will Deacon" <will.deacon@arm.com>,
	"zhang . lei" <zhang.lei@jp.fujitsu.com>,
	linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org
Subject: [PATCH 33/56] KVM: arm64/sve: Clean up UAPI register ID definitions
Date: Fri,  3 May 2019 13:44:04 +0100	[thread overview]
Message-ID: <20190503124427.190206-34-marc.zyngier@arm.com> (raw)
In-Reply-To: <20190503124427.190206-1-marc.zyngier@arm.com>

From: Dave Martin <Dave.Martin@arm.com>

Currently, the SVE register ID macros are not all defined in the
same way, and advertise the fact that FFR maps onto the nonexistent
predicate register P16.  This is really just for kernel
convenience, and may lead userspace into bad habits.

Instead, this patch masks the ID macro arguments so that
architecturally invalid register numbers will not be passed through
any more, and uses a literal KVM_REG_ARM64_SVE_FFR_BASE macro to
define KVM_REG_ARM64_SVE_FFR(), similarly to the way the _ZREG()
and _PREG() macros are defined.

Rather than plugging in magic numbers for the number of Z- and P-
registers and the maximum possible number of register slices, this
patch provides definitions for those too.  Userspace is going to
need them in any case, and it makes sense for them to come from
<uapi/asm/kvm.h>.

sve_reg_to_region() uses convenience constants that are defined in
a different way, and also makes use of the fact that the FFR IDs
are really contiguous with the P15 IDs, so this patch retains the
existing convenience constants in guest.c, supplemented with a
couple of sanity checks to check for consistency with the UAPI
header.

Fixes: e1c9c98345b3 ("KVM: arm64/sve: Add SVE support to register access ioctl interface")
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm64/include/uapi/asm/kvm.h | 32 ++++++++++++++++++++++---------
 arch/arm64/kvm/guest.c            |  9 +++++++++
 2 files changed, 32 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 6963b7e8062b..2a04ef015469 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -35,6 +35,7 @@
 #include <linux/psci.h>
 #include <linux/types.h>
 #include <asm/ptrace.h>
+#include <asm/sve_context.h>
 
 #define __KVM_HAVE_GUEST_DEBUG
 #define __KVM_HAVE_IRQ_LINE
@@ -233,16 +234,29 @@ struct kvm_vcpu_events {
 /* Z- and P-regs occupy blocks at the following offsets within this range: */
 #define KVM_REG_ARM64_SVE_ZREG_BASE	0
 #define KVM_REG_ARM64_SVE_PREG_BASE	0x400
+#define KVM_REG_ARM64_SVE_FFR_BASE	0x600
 
-#define KVM_REG_ARM64_SVE_ZREG(n, i)	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
-					 KVM_REG_ARM64_SVE_ZREG_BASE |	\
-					 KVM_REG_SIZE_U2048 |		\
-					 ((n) << 5) | (i))
-#define KVM_REG_ARM64_SVE_PREG(n, i)	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
-					 KVM_REG_ARM64_SVE_PREG_BASE |	\
-					 KVM_REG_SIZE_U256 |		\
-					 ((n) << 5) | (i))
-#define KVM_REG_ARM64_SVE_FFR(i)	KVM_REG_ARM64_SVE_PREG(16, i)
+#define KVM_ARM64_SVE_NUM_ZREGS		__SVE_NUM_ZREGS
+#define KVM_ARM64_SVE_NUM_PREGS		__SVE_NUM_PREGS
+
+#define KVM_ARM64_SVE_MAX_SLICES	32
+
+#define KVM_REG_ARM64_SVE_ZREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_ZREG_BASE | \
+	 KVM_REG_SIZE_U2048 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_ZREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_PREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_PREG_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_PREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_FFR(i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_FFR_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
 
 /* Vector lengths pseudo-register: */
 #define KVM_REG_ARM64_SVE_VLS		(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 4f7b26bbf671..2e449e1dea73 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -325,6 +325,15 @@ static int sve_reg_to_region(struct sve_state_reg_region *region,
 
 	size_t sve_state_size;
 
+	const u64 last_preg_id = KVM_REG_ARM64_SVE_PREG(SVE_NUM_PREGS - 1,
+							SVE_NUM_SLICES - 1);
+
+	/* Verify that the P-regs and FFR really do have contiguous IDs: */
+	BUILD_BUG_ON(KVM_REG_ARM64_SVE_FFR(0) != last_preg_id + 1);
+
+	/* Verify that we match the UAPI header: */
+	BUILD_BUG_ON(SVE_NUM_SLICES != KVM_ARM64_SVE_MAX_SLICES);
+
 	/* Only the first slice ever exists, for now: */
 	if ((reg->id & SVE_REG_SLICE_MASK) != 0)
 		return -ENOENT;
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <marc.zyngier@arm.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org, Will Deacon <will.deacon@arm.com>,
	Kristina Martsenko <kristina.martsenko@arm.com>,
	"zhang . lei" <zhang.lei@jp.fujitsu.com>,
	Julien Grall <julien.grall@arm.com>,
	kvmarm@lists.cs.columbia.edu,
	Amit Daniel Kachhap <amit.kachhap@arm.com>,
	Dave Martin <Dave.Martin@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 33/56] KVM: arm64/sve: Clean up UAPI register ID definitions
Date: Fri,  3 May 2019 13:44:04 +0100	[thread overview]
Message-ID: <20190503124427.190206-34-marc.zyngier@arm.com> (raw)
In-Reply-To: <20190503124427.190206-1-marc.zyngier@arm.com>

From: Dave Martin <Dave.Martin@arm.com>

Currently, the SVE register ID macros are not all defined in the
same way, and advertise the fact that FFR maps onto the nonexistent
predicate register P16.  This is really just for kernel
convenience, and may lead userspace into bad habits.

Instead, this patch masks the ID macro arguments so that
architecturally invalid register numbers will not be passed through
any more, and uses a literal KVM_REG_ARM64_SVE_FFR_BASE macro to
define KVM_REG_ARM64_SVE_FFR(), similarly to the way the _ZREG()
and _PREG() macros are defined.

Rather than plugging in magic numbers for the number of Z- and P-
registers and the maximum possible number of register slices, this
patch provides definitions for those too.  Userspace is going to
need them in any case, and it makes sense for them to come from
<uapi/asm/kvm.h>.

sve_reg_to_region() uses convenience constants that are defined in
a different way, and also makes use of the fact that the FFR IDs
are really contiguous with the P15 IDs, so this patch retains the
existing convenience constants in guest.c, supplemented with a
couple of sanity checks to check for consistency with the UAPI
header.

Fixes: e1c9c98345b3 ("KVM: arm64/sve: Add SVE support to register access ioctl interface")
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm64/include/uapi/asm/kvm.h | 32 ++++++++++++++++++++++---------
 arch/arm64/kvm/guest.c            |  9 +++++++++
 2 files changed, 32 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 6963b7e8062b..2a04ef015469 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -35,6 +35,7 @@
 #include <linux/psci.h>
 #include <linux/types.h>
 #include <asm/ptrace.h>
+#include <asm/sve_context.h>
 
 #define __KVM_HAVE_GUEST_DEBUG
 #define __KVM_HAVE_IRQ_LINE
@@ -233,16 +234,29 @@ struct kvm_vcpu_events {
 /* Z- and P-regs occupy blocks at the following offsets within this range: */
 #define KVM_REG_ARM64_SVE_ZREG_BASE	0
 #define KVM_REG_ARM64_SVE_PREG_BASE	0x400
+#define KVM_REG_ARM64_SVE_FFR_BASE	0x600
 
-#define KVM_REG_ARM64_SVE_ZREG(n, i)	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
-					 KVM_REG_ARM64_SVE_ZREG_BASE |	\
-					 KVM_REG_SIZE_U2048 |		\
-					 ((n) << 5) | (i))
-#define KVM_REG_ARM64_SVE_PREG(n, i)	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
-					 KVM_REG_ARM64_SVE_PREG_BASE |	\
-					 KVM_REG_SIZE_U256 |		\
-					 ((n) << 5) | (i))
-#define KVM_REG_ARM64_SVE_FFR(i)	KVM_REG_ARM64_SVE_PREG(16, i)
+#define KVM_ARM64_SVE_NUM_ZREGS		__SVE_NUM_ZREGS
+#define KVM_ARM64_SVE_NUM_PREGS		__SVE_NUM_PREGS
+
+#define KVM_ARM64_SVE_MAX_SLICES	32
+
+#define KVM_REG_ARM64_SVE_ZREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_ZREG_BASE | \
+	 KVM_REG_SIZE_U2048 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_ZREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_PREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_PREG_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_PREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_FFR(i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_FFR_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
 
 /* Vector lengths pseudo-register: */
 #define KVM_REG_ARM64_SVE_VLS		(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 4f7b26bbf671..2e449e1dea73 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -325,6 +325,15 @@ static int sve_reg_to_region(struct sve_state_reg_region *region,
 
 	size_t sve_state_size;
 
+	const u64 last_preg_id = KVM_REG_ARM64_SVE_PREG(SVE_NUM_PREGS - 1,
+							SVE_NUM_SLICES - 1);
+
+	/* Verify that the P-regs and FFR really do have contiguous IDs: */
+	BUILD_BUG_ON(KVM_REG_ARM64_SVE_FFR(0) != last_preg_id + 1);
+
+	/* Verify that we match the UAPI header: */
+	BUILD_BUG_ON(SVE_NUM_SLICES != KVM_ARM64_SVE_MAX_SLICES);
+
 	/* Only the first slice ever exists, for now: */
 	if ((reg->id & SVE_REG_SLICE_MASK) != 0)
 		return -ENOENT;
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <marc.zyngier@arm.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Andrew Jones" <drjones@redhat.com>,
	kvm@vger.kernel.org, "Julien Thierry" <julien.thierry@arm.com>,
	"Suzuki K Poulose" <suzuki.poulose@arm.com>,
	"Will Deacon" <will.deacon@arm.com>,
	"Christoffer Dall" <christoffer.dall@arm.com>,
	"Kristina Martsenko" <kristina.martsenko@arm.com>,
	"zhang . lei" <zhang.lei@jp.fujitsu.com>,
	"Julien Grall" <julien.grall@arm.com>,
	kvmarm@lists.cs.columbia.edu,
	"Amit Daniel Kachhap" <amit.kachhap@arm.com>,
	"Andrew Murray" <andrew.murray@arm.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Dave Martin" <Dave.Martin@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 33/56] KVM: arm64/sve: Clean up UAPI register ID definitions
Date: Fri,  3 May 2019 13:44:04 +0100	[thread overview]
Message-ID: <20190503124427.190206-34-marc.zyngier@arm.com> (raw)
In-Reply-To: <20190503124427.190206-1-marc.zyngier@arm.com>

From: Dave Martin <Dave.Martin@arm.com>

Currently, the SVE register ID macros are not all defined in the
same way, and advertise the fact that FFR maps onto the nonexistent
predicate register P16.  This is really just for kernel
convenience, and may lead userspace into bad habits.

Instead, this patch masks the ID macro arguments so that
architecturally invalid register numbers will not be passed through
any more, and uses a literal KVM_REG_ARM64_SVE_FFR_BASE macro to
define KVM_REG_ARM64_SVE_FFR(), similarly to the way the _ZREG()
and _PREG() macros are defined.

Rather than plugging in magic numbers for the number of Z- and P-
registers and the maximum possible number of register slices, this
patch provides definitions for those too.  Userspace is going to
need them in any case, and it makes sense for them to come from
<uapi/asm/kvm.h>.

sve_reg_to_region() uses convenience constants that are defined in
a different way, and also makes use of the fact that the FFR IDs
are really contiguous with the P15 IDs, so this patch retains the
existing convenience constants in guest.c, supplemented with a
couple of sanity checks to check for consistency with the UAPI
header.

Fixes: e1c9c98345b3 ("KVM: arm64/sve: Add SVE support to register access ioctl interface")
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm64/include/uapi/asm/kvm.h | 32 ++++++++++++++++++++++---------
 arch/arm64/kvm/guest.c            |  9 +++++++++
 2 files changed, 32 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 6963b7e8062b..2a04ef015469 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -35,6 +35,7 @@
 #include <linux/psci.h>
 #include <linux/types.h>
 #include <asm/ptrace.h>
+#include <asm/sve_context.h>
 
 #define __KVM_HAVE_GUEST_DEBUG
 #define __KVM_HAVE_IRQ_LINE
@@ -233,16 +234,29 @@ struct kvm_vcpu_events {
 /* Z- and P-regs occupy blocks at the following offsets within this range: */
 #define KVM_REG_ARM64_SVE_ZREG_BASE	0
 #define KVM_REG_ARM64_SVE_PREG_BASE	0x400
+#define KVM_REG_ARM64_SVE_FFR_BASE	0x600
 
-#define KVM_REG_ARM64_SVE_ZREG(n, i)	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
-					 KVM_REG_ARM64_SVE_ZREG_BASE |	\
-					 KVM_REG_SIZE_U2048 |		\
-					 ((n) << 5) | (i))
-#define KVM_REG_ARM64_SVE_PREG(n, i)	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
-					 KVM_REG_ARM64_SVE_PREG_BASE |	\
-					 KVM_REG_SIZE_U256 |		\
-					 ((n) << 5) | (i))
-#define KVM_REG_ARM64_SVE_FFR(i)	KVM_REG_ARM64_SVE_PREG(16, i)
+#define KVM_ARM64_SVE_NUM_ZREGS		__SVE_NUM_ZREGS
+#define KVM_ARM64_SVE_NUM_PREGS		__SVE_NUM_PREGS
+
+#define KVM_ARM64_SVE_MAX_SLICES	32
+
+#define KVM_REG_ARM64_SVE_ZREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_ZREG_BASE | \
+	 KVM_REG_SIZE_U2048 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_ZREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_PREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_PREG_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_PREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_FFR(i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_FFR_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
 
 /* Vector lengths pseudo-register: */
 #define KVM_REG_ARM64_SVE_VLS		(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 4f7b26bbf671..2e449e1dea73 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -325,6 +325,15 @@ static int sve_reg_to_region(struct sve_state_reg_region *region,
 
 	size_t sve_state_size;
 
+	const u64 last_preg_id = KVM_REG_ARM64_SVE_PREG(SVE_NUM_PREGS - 1,
+							SVE_NUM_SLICES - 1);
+
+	/* Verify that the P-regs and FFR really do have contiguous IDs: */
+	BUILD_BUG_ON(KVM_REG_ARM64_SVE_FFR(0) != last_preg_id + 1);
+
+	/* Verify that we match the UAPI header: */
+	BUILD_BUG_ON(SVE_NUM_SLICES != KVM_ARM64_SVE_MAX_SLICES);
+
 	/* Only the first slice ever exists, for now: */
 	if ((reg->id & SVE_REG_SLICE_MASK) != 0)
 		return -ENOENT;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-05-03 12:46 UTC|newest]

Thread overview: 174+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-03 12:43 [GIT PULL] KVM/arm updates for 5.2 Marc Zyngier
2019-05-03 12:43 ` Marc Zyngier
2019-05-03 12:43 ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 01/56] KVM: Documentation: Document arm64 core registers in detail Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 02/56] arm64: fpsimd: Always set TIF_FOREIGN_FPSTATE on task state flush Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 03/56] KVM: arm64: Delete orphaned declaration for __fpsimd_enabled() Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 04/56] KVM: arm64: Refactor kvm_arm_num_regs() for easier maintenance Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 05/56] KVM: arm64: Add missing #includes to kvm_host.h Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 06/56] arm64/sve: Clarify role of the VQ map maintenance functions Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 07/56] arm64/sve: Check SVE virtualisability Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 08/56] arm64/sve: Enable SVE state tracking for non-task contexts Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 09/56] KVM: arm64: Add a vcpu flag to control SVE visibility for the guest Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 10/56] KVM: arm64: Propagate vcpu into read_id_reg() Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 11/56] KVM: arm64: Support runtime sysreg visibility filtering Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 12/56] KVM: arm64/sve: System register context switch and access support Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 13/56] KVM: arm64/sve: Context switch the SVE registers Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 14/56] KVM: Allow 2048-bit register access via ioctl interface Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 15/56] KVM: arm64: Add missing #include of <linux/string.h> in guest.c Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 16/56] KVM: arm64: Factor out core register ID enumeration Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 17/56] KVM: arm64: Reject ioctl access to FPSIMD V-regs on SVE vcpus Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 18/56] KVM: arm64/sve: Add SVE support to register access ioctl interface Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 19/56] KVM: arm64: Enumerate SVE register indices for KVM_GET_REG_LIST Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 20/56] arm64/sve: In-kernel vector length availability query interface Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 21/56] KVM: arm/arm64: Add hook for arch-specific KVM initialisation Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 22/56] KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 23/56] KVM: arm64/sve: Add pseudo-register for the guest's vector lengths Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 24/56] KVM: arm64/sve: Allow userspace to enable SVE for vcpus Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 25/56] KVM: arm64: Add a capability to advertise SVE support Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 26/56] KVM: Document errors for KVM_GET_ONE_REG and KVM_SET_ONE_REG Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 27/56] KVM: arm64/sve: Document KVM API extensions for SVE Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43 ` [PATCH 28/56] arm64: KVM: Fix system register enumeration Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:43   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 29/56] arm64/sve: Clarify vq map semantics Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 30/56] KVM: arm/arm64: Demote kvm_arm_init_arch_resources() to just set up SVE Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 31/56] KVM: arm: Make vcpu finalization stubs into inline functions Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 32/56] KVM: arm64/sve: sys_regs: Demote redundant vcpu_has_sve() checks to WARNs Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` Marc Zyngier [this message]
2019-05-03 12:44   ` [PATCH 33/56] KVM: arm64/sve: Clean up UAPI register ID definitions Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 34/56] KVM: arm64/sve: Miscellaneous tidyups in guest.c Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 35/56] KVM: arm64/sve: Make register ioctl access errors more consistent Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 36/56] KVM: arm64/sve: WARN when avoiding divide-by-zero in sve_reg_to_region() Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 37/56] KVM: arm64/sve: Simplify KVM_REG_ARM64_SVE_VLS array sizing Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 38/56] KVM: arm64/sve: Explain validity checks in set_sve_vls() Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 39/56] KVM: arm/arm64: Clean up vcpu finalization function parameter naming Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 40/56] KVM: Clarify capability requirements for KVM_ARM_VCPU_FINALIZE Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 41/56] KVM: Clarify KVM_{SET,GET}_ONE_REG error code documentation Marc Zyngier
2019-05-03 12:44   ` [PATCH 41/56] KVM: Clarify KVM_{SET, GET}_ONE_REG " Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 42/56] KVM: arm64: Clarify access behaviour for out-of-range SVE register slice IDs Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 43/56] KVM: arm64: Add a vcpu flag to control ptrauth for guest Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 44/56] KVM: arm/arm64: Context-switch ptrauth registers Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 45/56] KVM: arm64: Add userspace flag to enable pointer authentication Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 46/56] KVM: arm64: Add capability to advertise ptrauth for guest Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 47/56] arm64: arm_pmu: Remove unnecessary isb instruction Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 48/56] arm64: KVM: Encapsulate kvm_cpu_context in kvm_host_data Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 49/56] arm64: KVM: Add accessors to track guest/host only counters Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 50/56] arm64: arm_pmu: Add !VHE support for exclude_host/exclude_guest attributes Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 51/56] arm64: KVM: Enable !VHE support for :G/:H perf event modifiers Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 52/56] arm64: KVM: Enable VHE " Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 53/56] arm64: KVM: Avoid isb's by using direct pmxevtyper sysreg Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 54/56] arm64: docs: Document perf event attributes Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 55/56] arm64: KVM: Fix perf cycle counter support for VHE Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44 ` [PATCH 56/56] KVM: arm64: Fix ptrauth ID register masking logic Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-03 12:44   ` Marc Zyngier
2019-05-15 21:42 ` [GIT PULL] KVM/arm updates for 5.2 Paolo Bonzini
2019-05-15 21:42   ` Paolo Bonzini
2019-05-15 21:42   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190503124427.190206-34-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=Dave.Martin@arm.com \
    --cc=alex.bennee@linaro.org \
    --cc=amit.kachhap@arm.com \
    --cc=andrew.murray@arm.com \
    --cc=christoffer.dall@arm.com \
    --cc=drjones@redhat.com \
    --cc=julien.grall@arm.com \
    --cc=julien.thierry@arm.com \
    --cc=kristina.martsenko@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=rkrcmar@redhat.com \
    --cc=suzuki.poulose@arm.com \
    --cc=will.deacon@arm.com \
    --cc=zhang.lei@jp.fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.