All of lore.kernel.org
 help / color / mirror / Atom feed
From: Satya Tangirala <satyat@google.com>
To: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-fscrypt@vger.kernel.org, linux-fsdevel@vger.kernel.org
Cc: Parshuram Raju Thombare <pthombar@cadence.com>,
	Ladvine D Almeida <ladvine.dalmeida@synopsys.com>,
	Barani Muthukumaran <bmuthuku@qti.qualcomm.com>,
	Kuohong Wang <kuohong.wang@mediatek.com>,
	Satya Tangirala <satyat@google.com>
Subject: [RFC PATCH 2/4] scsi: ufs: UFS driver v2.1 crypto support
Date: Mon,  6 May 2019 15:35:42 -0700	[thread overview]
Message-ID: <20190506223544.195371-3-satyat@google.com> (raw)
In-Reply-To: <20190506223544.195371-1-satyat@google.com>

Uses the UFSHCI v2.1 spec to manage keys in inline crypto engine
hardware, and exposes that functionality through the keyslot manager it
sets up in the device's request_queue. Uses the keyslot in the
bio_crypt_ctx of the bio, if specified, as the encryption context.

Known Issues: In the current implementation, multiple keyslot managers
may be allocated for a single UFS host. We should tie keyslot managers
to hosts to avoid this issue.

Signed-off-by: Satya Tangirala <satyat@google.com>
---
 drivers/scsi/ufs/Kconfig         |  10 +
 drivers/scsi/ufs/Makefile        |   1 +
 drivers/scsi/ufs/ufshcd-crypto.c | 449 +++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd-crypto.h |  92 +++++++
 drivers/scsi/ufs/ufshcd.c        |  85 +++++-
 drivers/scsi/ufs/ufshcd.h        |  23 ++
 drivers/scsi/ufs/ufshci.h        |  67 ++++-
 7 files changed, 720 insertions(+), 7 deletions(-)
 create mode 100644 drivers/scsi/ufs/ufshcd-crypto.c
 create mode 100644 drivers/scsi/ufs/ufshcd-crypto.h

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 6db37cf306b0..c14f445a2522 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -135,3 +135,13 @@ config SCSI_UFS_BSG
 
 	  Select this if you need a bsg device node for your UFS controller.
 	  If unsure, say N.
+
+config SCSI_UFS_CRYPTO
+	bool "UFS Crypto Engine Support"
+	depends on SCSI_UFSHCD && BLK_KEYSLOT_MANAGER
+	help
+	Enable Crypto Engine Support in UFS.
+	Enabling this makes it possible for the kernel to use the crypto
+	capabilities of the UFS device (if present) to perform crypto
+	operations on data being transferred into/out of the device.
+
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index a3bd70c3652c..5b52463e8abf 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -10,3 +10,4 @@ ufshcd-core-$(CONFIG_SCSI_UFS_BSG)	+= ufs_bsg.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
 obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
 obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
+ufshcd-core-$(CONFIG_SCSI_UFS_CRYPTO) += ufshcd-crypto.o
\ No newline at end of file
diff --git a/drivers/scsi/ufs/ufshcd-crypto.c b/drivers/scsi/ufs/ufshcd-crypto.c
new file mode 100644
index 000000000000..af1da161d53e
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-crypto.c
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <crypto/algapi.h>
+
+#include "ufshcd.h"
+#include "ufshcd-crypto.h"
+
+/*TODO: worry about endianness and cpu_to_le32 */
+
+bool ufshcd_hba_is_crypto_supported(struct ufs_hba *hba)
+{
+	return hba->crypto_capabilities.reg_val != 0;
+}
+
+bool ufshcd_is_crypto_enabled(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_CRYPTO;
+}
+
+static bool ufshcd_cap_idx_valid(struct ufs_hba *hba, unsigned int cap_idx)
+{
+	return cap_idx < hba->crypto_capabilities.num_crypto_cap;
+}
+
+bool ufshcd_keyslot_valid(struct ufs_hba *hba, unsigned int slot)
+{
+	/**
+	 * The actual number of configurations supported is (CFGC+1), so slot
+	 * numbers range from 0 to config_count inclusive.
+	 */
+	return slot <= hba->crypto_capabilities.config_count;
+}
+
+static u8 get_data_unit_size_mask(unsigned int data_unit_size)
+{
+	if (data_unit_size < 512 || data_unit_size > 65536 ||
+	    !is_power_of_2(data_unit_size)) {
+		return 0;
+	}
+
+	return data_unit_size / 512;
+}
+
+static size_t get_keysize_bytes(enum ufs_crypto_key_size size)
+{
+	switch (size) {
+	case UFS_CRYPTO_KEY_SIZE_128: return 16;
+	case UFS_CRYPTO_KEY_SIZE_192: return 24;
+	case UFS_CRYPTO_KEY_SIZE_256: return 32;
+	case UFS_CRYPTO_KEY_SIZE_512: return 64;
+	default: return 0;
+	}
+}
+
+/**
+ * ufshcd_crypto_cfg_entry_write_key - Write a key into a crypto_cfg_entry
+ *
+ *	Writes the key with the appropriate format - for AES_XTS,
+ *	the first half of the key is copied as is, the second half is
+ *	copied with an offset halfway into the cfg->crypto_key array.
+ *	For the other supported crypto algs, the key is just copied.
+ *
+ * @cfg: The crypto config to write to
+ * @key: The key to write
+ * @cap: The crypto capability (which specifies the crypto alg and key size)
+ *
+ * Returns 0 on success, or -errno
+ */
+static int ufshcd_crypto_cfg_entry_write_key(union ufs_crypto_cfg_entry *cfg,
+					     const u8 *key,
+					     union ufs_crypto_cap_entry cap)
+{
+	size_t key_size_bytes = get_keysize_bytes(cap.key_size);
+
+	if (key_size_bytes == 0)
+		return -EINVAL;
+
+	switch (cap.algorithm_id) {
+	case UFS_CRYPTO_ALG_AES_XTS:
+		key_size_bytes *= 2;
+		if (key_size_bytes > UFS_CRYPTO_KEY_MAX_SIZE)
+			return -EINVAL;
+
+		memcpy(cfg->crypto_key, key, key_size_bytes/2);
+		memcpy(cfg->crypto_key + UFS_CRYPTO_KEY_MAX_SIZE/2,
+		       key + key_size_bytes/2, key_size_bytes/2);
+		return 0;
+	case UFS_CRYPTO_ALG_BITLOCKER_AES_CBC: // fallthrough
+	case UFS_CRYPTO_ALG_AES_ECB: // fallthrough
+	case UFS_CRYPTO_ALG_ESSIV_AES_CBC:
+		memcpy(cfg->crypto_key, key, key_size_bytes);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void program_key(struct ufs_hba *hba,
+			const union ufs_crypto_cfg_entry *cfg,
+			int slot)
+{
+	int i;
+	u32 slot_offset = hba->crypto_cfg_register + slot * sizeof(*cfg);
+
+	/* Clear the dword 16 */
+	ufshcd_writel(hba, 0, slot_offset + 16 * sizeof(cfg->reg_val[0]));
+	/* Ensure that CFGE is cleared before programming the key */
+	wmb();
+	/* TODO: swab32 on the key? */
+	for (i = 0; i < 16; i++) {
+		ufshcd_writel(hba, cfg->reg_val[i],
+			      slot_offset + i * sizeof(cfg->reg_val[0]));
+		/* Spec says each dword in key must be written sequentially */
+		wmb();
+	}
+	/* Write dword 17 */
+	ufshcd_writel(hba, cfg->reg_val[17],
+		      slot_offset + 17 * sizeof(cfg->reg_val[0]));
+	/* Dword 16 must be written last */
+	wmb();
+	/* Write dword 16 */
+	ufshcd_writel(hba, cfg->reg_val[16],
+		      slot_offset + 16 * sizeof(cfg->reg_val[0]));
+	wmb();
+}
+
+static int ufshcd_crypto_keyslot_program(void *hba_p, const u8 *key,
+			      unsigned int data_unit_size,
+			      unsigned int crypto_alg_id,
+			      unsigned int slot)
+{
+	struct ufs_hba *hba = hba_p;
+	int err = 0;
+	u8 data_unit_mask;
+	union ufs_crypto_cfg_entry cfg;
+	union ufs_crypto_cfg_entry *cfg_arr = hba->crypto_cfgs;
+
+	if (!ufshcd_is_crypto_enabled(hba) ||
+	    !ufshcd_keyslot_valid(hba, slot) ||
+	    !ufshcd_cap_idx_valid(hba, crypto_alg_id)) {
+		return -EINVAL;
+	}
+
+	data_unit_mask = get_data_unit_size_mask(data_unit_size);
+
+	if (!(data_unit_mask &
+	      hba->crypto_cap_array[crypto_alg_id].sdus_mask)) {
+		return -EINVAL;
+	}
+
+	memset(&cfg, 0, sizeof(cfg));
+	cfg.data_unit_size = data_unit_mask;
+	cfg.crypto_cap_idx = crypto_alg_id;
+	cfg.config_enable |= UFS_CRYPTO_CONFIGURATION_ENABLE;
+
+	err = ufshcd_crypto_cfg_entry_write_key(&cfg, key,
+					hba->crypto_cap_array[crypto_alg_id]);
+	if (err)
+		return err;
+
+	program_key(hba, &cfg, slot);
+
+	memcpy(&cfg_arr[slot], &cfg, sizeof(cfg));
+	memzero_explicit(&cfg, sizeof(cfg));
+
+	return 0;
+}
+
+static int ufshcd_crypto_keyslot_find(void *hba_p,
+				      const u8 *key,
+				      unsigned int data_unit_size,
+				      unsigned int crypto_alg_id)
+{
+	struct ufs_hba *hba = hba_p;
+	int err = 0;
+	int slot;
+	u8 data_unit_mask;
+	union ufs_crypto_cfg_entry cfg;
+	union ufs_crypto_cfg_entry *cfg_arr = hba->crypto_cfgs;
+
+	if (!ufshcd_is_crypto_enabled(hba) ||
+	    crypto_alg_id >= hba->crypto_capabilities.num_crypto_cap) {
+		return -EINVAL;
+	}
+
+	data_unit_mask = get_data_unit_size_mask(data_unit_size);
+
+	if (!(data_unit_mask &
+	      hba->crypto_cap_array[crypto_alg_id].sdus_mask)) {
+		return -EINVAL;
+	}
+
+	memset(&cfg, 0, sizeof(cfg));
+	err = ufshcd_crypto_cfg_entry_write_key(&cfg, key,
+					hba->crypto_cap_array[crypto_alg_id]);
+
+	if (err)
+		return -EINVAL;
+
+	for (slot = 0; slot <= hba->crypto_capabilities.config_count; slot++) {
+		if ((cfg_arr[slot].config_enable &
+		     UFS_CRYPTO_CONFIGURATION_ENABLE) &&
+		    data_unit_mask == cfg_arr[slot].data_unit_size &&
+		    crypto_alg_id == cfg_arr[slot].crypto_cap_idx &&
+		    crypto_memneq(&cfg.crypto_key, cfg_arr[slot].crypto_key,
+				  UFS_CRYPTO_KEY_MAX_SIZE) == 0) {
+			memzero_explicit(&cfg, sizeof(cfg));
+			return slot;
+		}
+	}
+
+	memzero_explicit(&cfg, sizeof(cfg));
+	return -ENOKEY;
+}
+
+static int ufshcd_crypto_keyslot_evict(void *hba_p, unsigned int slot,
+				       const u8 *key,
+				       unsigned int data_unit_size,
+				       unsigned int crypto_alg_id)
+{
+	struct ufs_hba *hba = hba_p;
+	int i = 0;
+	u32 reg_base;
+	union ufs_crypto_cfg_entry *cfg_arr = hba->crypto_cfgs;
+
+	if (!ufshcd_is_crypto_enabled(hba) ||
+	    !ufshcd_keyslot_valid(hba, slot)) {
+		return -EINVAL;
+	}
+
+	memset(&cfg_arr[slot], 0, sizeof(cfg_arr[slot]));
+	reg_base = hba->crypto_cfg_register +
+			slot * sizeof(cfg_arr[0]);
+
+	/**
+	 * Clear the crypto cfg on the device. Clearing CFGE
+	 * might not be sufficient, so just clear the entire cfg.
+	 */
+	for (i = 0; i < sizeof(cfg_arr[0]); i += sizeof(__le32))
+		ufshcd_writel(hba, 0, reg_base + i);
+	wmb();
+
+	return 0;
+}
+
+static int ufshcd_crypto_alg_find(void *hba_p,
+			   enum blk_crypt_mode_index crypt_mode,
+			   unsigned int data_unit_size)
+{
+	struct ufs_hba *hba = hba_p;
+	enum ufs_crypto_alg ufs_alg;
+	u8 data_unit_mask;
+	int cap_idx;
+	enum ufs_crypto_key_size ufs_key_size;
+	union ufs_crypto_cap_entry *ccap_array = hba->crypto_cap_array;
+
+	if (!ufshcd_hba_is_crypto_supported(hba))
+		return -EINVAL;
+
+	switch (crypt_mode) {
+	case BLK_ENCRYPTION_MODE_AES_256_XTS:
+		ufs_alg = UFS_CRYPTO_ALG_AES_XTS;
+		ufs_key_size = UFS_CRYPTO_KEY_SIZE_256;
+		break;
+	/**
+	 * case BLK_CRYPTO_ALG_BITLOCKER_AES_CBC:
+	 *	ufs_alg = UFS_CRYPTO_ALG_BITLOCKER_AES_CBC;
+	 *	break;
+	 * case INLINECRYPT_ALG_AES_ECB:
+	 *	ufs_alg = UFS_CRYPTO_ALG_AES_ECB;
+	 *	break;
+	 * case INLINECRYPT_ALG_ESSIV_AES_CBC:
+	 *	ufs_alg = UFS_CRYPTO_ALG_ESSIV_AES_CBC;
+	 *	break;
+	 */
+	default: return -EINVAL;
+	}
+
+	data_unit_mask = get_data_unit_size_mask(data_unit_size);
+
+	/**
+	 * TODO: We can replace this for loop entirely by constructing
+	 * a table on init that translates blk_crypt_mode_index to
+	 * ufs crypt alg numbers. (By assuming that each alg/keysize combo
+	 * appears only once in the ufs crypto caps array.)
+	 */
+	for (cap_idx = 0; cap_idx < hba->crypto_capabilities.num_crypto_cap;
+	     cap_idx++) {
+		if (ccap_array[cap_idx].algorithm_id == ufs_alg &&
+		    (ccap_array[cap_idx].sdus_mask & data_unit_mask) &&
+		    ccap_array[cap_idx].key_size == ufs_key_size) {
+			return cap_idx;
+		}
+	}
+
+	return -EINVAL;
+}
+
+int ufshcd_crypto_enable(struct ufs_hba *hba)
+{
+	union ufs_crypto_cfg_entry *cfg_arr = hba->crypto_cfgs;
+	int slot;
+
+	if (!ufshcd_hba_is_crypto_supported(hba))
+		return -EINVAL;
+
+	hba->caps |= UFSHCD_CAP_CRYPTO;
+	/**
+	 * Reset might clear all keys, so reprogram all the keys.
+	 * Also serves to clear keys on driver init.
+	 */
+	for (slot = 0; slot <= hba->crypto_capabilities.config_count; slot++)
+		program_key(hba, &cfg_arr[slot], slot);
+
+	return 0;
+}
+
+int ufshcd_crypto_disable(struct ufs_hba *hba)
+{
+	if (!ufshcd_hba_is_crypto_supported(hba))
+		return -EINVAL;
+
+	hba->caps &= ~UFSHCD_CAP_CRYPTO;
+
+	return 0;
+}
+
+
+/**
+ * ufshcd_hba_init_crypto - Read crypto capabilities, init crypto fields in hba
+ * @hba: Per adapter instance
+ *
+ * Returns 0 on success. Returns -ENODEV if such capabilties don't exist, and
+ * -ENOMEM upon OOM.
+ */
+int ufshcd_hba_init_crypto(struct ufs_hba *hba)
+{
+	int cap_idx = 0;
+	int err = 0;
+	/* Default to disabling crypto */
+	hba->caps &= ~UFSHCD_CAP_CRYPTO;
+
+	if (!(hba->capabilities & MASK_CRYPTO_SUPPORT)) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	/**
+	 * Crypto Capabilities should never be 0, because the
+	 * config_array_ptr > 04h. So we use a 0 value to indicate that
+	 * crypto init failed, and can't be enabled.
+	 */
+	hba->crypto_capabilities.reg_val = ufshcd_readl(hba, REG_UFS_CCAP);
+	hba->crypto_cfg_register =
+		(u32)hba->crypto_capabilities.config_array_ptr * 0x100;
+	hba->crypto_cap_array =
+		devm_kcalloc(hba->dev,
+			     hba->crypto_capabilities.num_crypto_cap,
+			     sizeof(hba->crypto_cap_array[0]),
+			     GFP_KERNEL);
+	if (!hba->crypto_cap_array) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	hba->crypto_cfgs =
+		devm_kcalloc(hba->dev,
+			     hba->crypto_capabilities.config_count + 1,
+			     sizeof(union ufs_crypto_cfg_entry),
+			     GFP_KERNEL);
+	if (!hba->crypto_cfgs) {
+		err = -ENOMEM;
+		goto out_cfg_mem;
+	}
+
+	/**
+	 * Store all the capabilities now so that we don't need to repeatedly
+	 * access the device each time we want to know its capabilities
+	 */
+	for (cap_idx = 0; cap_idx < hba->crypto_capabilities.num_crypto_cap;
+	     cap_idx++) {
+		hba->crypto_cap_array[cap_idx].reg_val =
+			ufshcd_readl(hba,
+				     REG_UFS_CRYPTOCAP +
+				     cap_idx * sizeof(__le32));
+	}
+
+	return 0;
+out_cfg_mem:
+	devm_kfree(hba->dev, hba->crypto_cap_array);
+out:
+	// TODO: print error?
+	/* Indicate that init failed by setting crypto_capabilities to 0 */
+	hba->crypto_capabilities.reg_val = 0;
+	return err;
+}
+
+const struct keyslot_mgmt_ll_ops ufshcd_ksm_ops = {
+	.keyslot_program	= ufshcd_crypto_keyslot_program,
+	.keyslot_evict		= ufshcd_crypto_keyslot_evict,
+	.keyslot_find		= ufshcd_crypto_keyslot_find,
+	.crypto_alg_find	= ufshcd_crypto_alg_find,
+};
+
+int ufshcd_crypto_setup_rq_keyslot_manager(struct ufs_hba *hba,
+					   struct request_queue *q)
+{
+	int err = 0;
+
+	if (!ufshcd_hba_is_crypto_supported(hba))
+		return 0;
+
+	if (!q) {
+		err = -ENODEV;
+		goto out_no_q;
+	}
+
+	q->ksm = keyslot_manager_create(
+	    hba->crypto_capabilities.config_count+1,
+	    &ufshcd_ksm_ops, hba);
+	/*
+	 * If we fail we make it look like
+	 * crypto is not supported, which will avoid issues
+	 * with reset
+	 */
+	if (!q->ksm) {
+		err = -ENOMEM;
+out_no_q:
+		ufshcd_crypto_disable(hba);
+		hba->crypto_capabilities.reg_val = 0;
+		devm_kfree(hba->dev, hba->crypto_cap_array);
+		devm_kfree(hba->dev, hba->crypto_cfgs);
+		return err;
+	}
+
+	return 0;
+}
+
+int ufshcd_crypto_destroy_rq_keyslot_manager(struct request_queue *q)
+{
+	if (q && q->ksm)
+		keyslot_manager_destroy(q->ksm);
+
+	return 0;
+}
+
diff --git a/drivers/scsi/ufs/ufshcd-crypto.h b/drivers/scsi/ufs/ufshcd-crypto.h
new file mode 100644
index 000000000000..16445efe3666
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-crypto.h
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef _UFSHCD_CRYPTO_H
+#define _UFSHCD_CRYPTO_H
+
+struct ufs_hba;
+
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+#include <linux/keyslot-manager.h>
+
+#include "ufshci.h"
+
+bool ufshcd_keyslot_valid(struct ufs_hba *hba, unsigned int slot);
+
+bool ufshcd_hba_is_crypto_supported(struct ufs_hba *hba);
+
+bool ufshcd_is_crypto_enabled(struct ufs_hba *hba);
+
+int ufshcd_crypto_set_enable_slot(struct ufs_hba *hba,
+				  unsigned int slot,
+				  bool enable);
+
+int ufshcd_crypto_enable(struct ufs_hba *hba);
+
+int ufshcd_crypto_disable(struct ufs_hba *hba);
+
+int ufshcd_hba_init_crypto(struct ufs_hba *hba);
+
+int ufshcd_crypto_setup_rq_keyslot_manager(struct ufs_hba *hba,
+					   struct request_queue *q);
+
+int ufshcd_crypto_destroy_rq_keyslot_manager(struct request_queue *q);
+
+#else /* CONFIG_UFS_CRYPTO */
+
+static inline bool ufshcd_keyslot_valid(struct ufs_hba *hba,
+					unsigned int slot)
+{
+	return false;
+}
+
+static inline bool ufshcd_hba_is_crypto_supported(struct ufs_hba *hba)
+{
+	return false;
+}
+
+static inline bool ufshcd_is_crypto_enabled(struct ufs_hba *hba)
+{
+	return false;
+}
+
+static inline int ufshcd_crypto_set_enable_slot(struct ufs_hba *hba,
+				  unsigned int slot,
+				  bool enable)
+{
+	return -1;
+}
+
+static inline int ufshcd_crypto_enable(struct ufs_hba *hba)
+{
+	return -1;
+}
+
+static inline int ufshcd_crypto_disable(struct ufs_hba *hba)
+{
+	return -1;
+}
+
+static inline int ufshcd_hba_init_crypto(struct ufs_hba *hba)
+{
+	return -1;
+}
+
+static inline int ufshcd_crypto_setup_rq_keyslot_manager(
+					struct ufs_hba *hba,
+					struct request_queue *q)
+{
+	return -1;
+}
+
+static inline int ufshcd_crypto_destroy_rq_keyslot_manager(
+				struct request_queue *q)
+{
+	return -1;
+}
+
+#endif /* CONFIG_SCSI_UFS_CRYPTO */
+
+#endif /* _UFSHCD_CRYPTO_H */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e040f9dd9ff3..65c51943e331 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -47,6 +47,7 @@
 #include "unipro.h"
 #include "ufs-sysfs.h"
 #include "ufs_bsg.h"
+#include "ufshcd-crypto.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/ufs.h>
@@ -855,7 +856,14 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
  */
 static inline void ufshcd_hba_start(struct ufs_hba *hba)
 {
-	ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE);
+	u32 val = CONTROLLER_ENABLE;
+
+	if (ufshcd_hba_is_crypto_supported(hba)) {
+		ufshcd_crypto_enable(hba);
+		val |= CRYPTO_GENERAL_ENABLE;
+	}
+
+	ufshcd_writel(hba, val, REG_CONTROLLER_ENABLE);
 }
 
 /**
@@ -2208,9 +2216,21 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
 		dword_0 |= UTP_REQ_DESC_INT_CMD;
 
 	/* Transfer request descriptor header fields */
+	if (lrbp->crypto_enable) {
+		dword_0 |= UTP_REQ_DESC_CRYPTO_ENABLE_CMD;
+		dword_0 |= lrbp->crypto_key_slot;
+		req_desc->header.dword_1 =
+			cpu_to_le32((u32)lrbp->data_unit_num);
+		req_desc->header.dword_3 =
+			cpu_to_le32((u32)(lrbp->data_unit_num >> 32));
+	} else {
+		/* dword_1 and dword_3 are reserved, hence they are set to 0 */
+		req_desc->header.dword_1 = 0;
+		req_desc->header.dword_3 = 0;
+	}
+
 	req_desc->header.dword_0 = cpu_to_le32(dword_0);
-	/* dword_1 is reserved, hence it is set to 0 */
-	req_desc->header.dword_1 = 0;
+
 	/*
 	 * assigning invalid value for command status. Controller
 	 * updates OCS on command completion, with the command
@@ -2218,8 +2238,6 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
 	 */
 	req_desc->header.dword_2 =
 		cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
-	/* dword_3 is reserved, hence it is set to 0 */
-	req_desc->header.dword_3 = 0;
 
 	req_desc->prd_table_length = 0;
 }
@@ -2379,6 +2397,38 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
 	return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
 }
 
+static inline int ufshcd_prepare_lrbp_crypto(struct ufs_hba *hba,
+					     struct scsi_cmnd *cmd,
+					     struct ufshcd_lrb *lrbp)
+{
+	int key_slot;
+
+	if (!bio_crypt_should_process(cmd->request->bio,
+					cmd->request->q)) {
+		lrbp->crypto_enable = false;
+		return 0;
+	}
+
+	if (WARN_ON(!ufshcd_is_crypto_enabled(hba))) {
+		/**
+		 * Upper layer asked us to do inline encryption
+		 * but that isn't enabled, so we fail this request.
+		 */
+		return -EINVAL;
+	}
+	key_slot = bio_crypt_get_slot(cmd->request->bio);
+	if (!ufshcd_keyslot_valid(hba, key_slot))
+		return -EINVAL;
+
+	lrbp->crypto_enable = true;
+	lrbp->crypto_key_slot = key_slot;
+	lrbp->data_unit_num =
+		bio_crypt_data_unit_num(cmd->request->bio);
+
+	return 0;
+}
+
+
 /**
  * ufshcd_queuecommand - main entry point for SCSI requests
  * @host: SCSI host pointer
@@ -2466,6 +2516,13 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	lrbp->task_tag = tag;
 	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
 	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
+
+	err = ufshcd_prepare_lrbp_crypto(hba, cmd, lrbp);
+	if (err) {
+		lrbp->cmd = NULL;
+		clear_bit_unlock(tag, &hba->lrb_in_use);
+		goto out;
+	}
 	lrbp->req_abort_skip = false;
 
 	ufshcd_comp_scsi_upiu(hba, lrbp);
@@ -2499,6 +2556,7 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
 	lrbp->task_tag = tag;
 	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
 	lrbp->intr_cmd = true; /* No interrupt aggregation */
+	lrbp->crypto_enable = false; /* No crypto operations */
 	hba->dev_cmd.type = cmd_type;
 
 	return ufshcd_comp_devman_upiu(hba, lrbp);
@@ -4191,6 +4249,8 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)
 {
 	int err;
 
+	ufshcd_crypto_disable(hba);
+
 	ufshcd_writel(hba, CONTROLLER_DISABLE,  REG_CONTROLLER_ENABLE);
 	err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE,
 					CONTROLLER_ENABLE, CONTROLLER_DISABLE,
@@ -4584,10 +4644,13 @@ static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth)
 static int ufshcd_slave_configure(struct scsi_device *sdev)
 {
 	struct request_queue *q = sdev->request_queue;
+	struct ufs_hba *hba = shost_priv(sdev->host);
 
 	blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
 	blk_queue_max_segment_size(q, PRDT_DATA_BYTE_COUNT_MAX);
 
+	ufshcd_crypto_setup_rq_keyslot_manager(hba, q);
+
 	return 0;
 }
 
@@ -4598,6 +4661,7 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
 static void ufshcd_slave_destroy(struct scsi_device *sdev)
 {
 	struct ufs_hba *hba;
+	struct request_queue *q = sdev->request_queue;
 
 	hba = shost_priv(sdev->host);
 	/* Drop the reference as it won't be needed anymore */
@@ -4608,6 +4672,8 @@ static void ufshcd_slave_destroy(struct scsi_device *sdev)
 		hba->sdev_ufs_device = NULL;
 		spin_unlock_irqrestore(hba->host->host_lock, flags);
 	}
+
+	ufshcd_crypto_destroy_rq_keyslot_manager(q);
 }
 
 /**
@@ -4723,6 +4789,8 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	case OCS_MISMATCH_RESP_UPIU_SIZE:
 	case OCS_PEER_COMM_FAILURE:
 	case OCS_FATAL_ERROR:
+	case OCS_INVALID_CRYPTO_CONFIG:
+	case OCS_GENERAL_CRYPTO_ERROR:
 	default:
 		result |= DID_ERROR << 16;
 		dev_err(hba->dev,
@@ -8287,6 +8355,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 		goto exit_gating;
 	}
 
+	/* Init crypto */
+	err = ufshcd_hba_init_crypto(hba);
+	if (err) {
+		dev_err(hba->dev, "crypto setup failed\n");
+		goto out_remove_scsi_host;
+	}
+
 	/* Host controller enable */
 	err = ufshcd_hba_enable(hba);
 	if (err) {
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index ecfa898b9ccc..283014e0924f 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -167,6 +167,9 @@ struct ufs_pm_lvl_states {
  * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
  * @issue_time_stamp: time stamp for debug purposes
  * @compl_time_stamp: time stamp for statistics
+ * @crypto_enable: whether or not the request needs inline crypto operations
+ * @crypto_key_slot: the key slot to use for inline crypto
+ * @data_unit_num: the data unit number for the first block for inline crypto
  * @req_abort_skip: skip request abort task flag
  */
 struct ufshcd_lrb {
@@ -191,6 +194,9 @@ struct ufshcd_lrb {
 	bool intr_cmd;
 	ktime_t issue_time_stamp;
 	ktime_t compl_time_stamp;
+	bool crypto_enable;
+	u8 crypto_key_slot;
+	u64 data_unit_num;
 
 	bool req_abort_skip;
 };
@@ -501,6 +507,10 @@ struct ufs_stats {
  * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
  *  device is known or not.
  * @scsi_block_reqs_cnt: reference counting for scsi block requests
+ * @crypto_capabilities: Content of crypto capabilities register (0x100)
+ * @crypto_cap_array: Array of crypto capabilities
+ * @crypto_cfg_register: Start of the crypto cfg array
+ * @crypto_cfgs: Array of crypto configurations (i.e. config for each slot)
  */
 struct ufs_hba {
 	void __iomem *mmio_base;
@@ -692,6 +702,11 @@ struct ufs_hba {
 	 * the performance of ongoing read/write operations.
 	 */
 #define UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND (1 << 5)
+	/*
+	 * This capability allows the host controller driver to use the
+	 * inline crypto engine, if it is present
+	 */
+#define UFSHCD_CAP_CRYPTO (1 << 6)
 
 	struct devfreq *devfreq;
 	struct ufs_clk_scaling clk_scaling;
@@ -706,6 +721,14 @@ struct ufs_hba {
 
 	struct device		bsg_dev;
 	struct request_queue	*bsg_queue;
+
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+	/* crypto */
+	union ufs_crypto_capabilities crypto_capabilities;
+	union ufs_crypto_cap_entry *crypto_cap_array;
+	u32 crypto_cfg_register;
+	union ufs_crypto_cfg_entry *crypto_cfgs;
+#endif /* CONFIG_SCSI_UFS_CRYPTO */
 };
 
 /* Returns true if clocks can be gated. Otherwise false */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 6fa889de5ee5..a757eaf99a19 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -90,6 +90,7 @@ enum {
 	MASK_64_ADDRESSING_SUPPORT		= 0x01000000,
 	MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT	= 0x02000000,
 	MASK_UIC_DME_TEST_MODE_SUPPORT		= 0x04000000,
+	MASK_CRYPTO_SUPPORT			= 0x10000000,
 };
 
 #define UFS_MASK(mask, offset)		((mask) << (offset))
@@ -143,6 +144,7 @@ enum {
 #define DEVICE_FATAL_ERROR			0x800
 #define CONTROLLER_FATAL_ERROR			0x10000
 #define SYSTEM_BUS_FATAL_ERROR			0x20000
+#define CRYPTO_ENGINE_FATAL_ERROR		0x40000
 
 #define UFSHCD_UIC_PWR_MASK	(UIC_HIBERNATE_ENTER |\
 				UIC_HIBERNATE_EXIT |\
@@ -153,11 +155,13 @@ enum {
 #define UFSHCD_ERROR_MASK	(UIC_ERROR |\
 				DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
-				SYSTEM_BUS_FATAL_ERROR)
+				SYSTEM_BUS_FATAL_ERROR |\
+				CRYPTO_ENGINE_FATAL_ERROR)
 
 #define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
-				SYSTEM_BUS_FATAL_ERROR)
+				SYSTEM_BUS_FATAL_ERROR |\
+				CRYPTO_ENGINE_FATAL_ERROR)
 
 /* HCS - Host Controller Status 30h */
 #define DEVICE_PRESENT				0x1
@@ -316,6 +320,61 @@ enum {
 	INTERRUPT_MASK_ALL_VER_21	= 0x71FFF,
 };
 
+/* CCAP - Crypto Capability 100h */
+union ufs_crypto_capabilities {
+	__le32 reg_val;
+	struct {
+		u8 num_crypto_cap;
+		u8 config_count;
+		u8 reserved;
+		u8 config_array_ptr;
+	};
+};
+
+enum ufs_crypto_key_size {
+	UFS_CRYPTO_KEY_SIZE_INVALID	= 0x0,
+	UFS_CRYPTO_KEY_SIZE_128		= 0x1,
+	UFS_CRYPTO_KEY_SIZE_192		= 0x2,
+	UFS_CRYPTO_KEY_SIZE_256		= 0x3,
+	UFS_CRYPTO_KEY_SIZE_512		= 0x4,
+};
+
+enum ufs_crypto_alg {
+	UFS_CRYPTO_ALG_AES_XTS			= 0x0,
+	UFS_CRYPTO_ALG_BITLOCKER_AES_CBC	= 0x1,
+	UFS_CRYPTO_ALG_AES_ECB			= 0x2,
+	UFS_CRYPTO_ALG_ESSIV_AES_CBC		= 0x3,
+};
+
+/* x-CRYPTOCAP - Crypto Capability X */
+union ufs_crypto_cap_entry {
+	__le32 reg_val;
+	struct {
+		u8 algorithm_id;
+		u8 sdus_mask; /* Supported data unit size mask */
+		u8 key_size;
+		u8 reserved;
+	};
+};
+
+#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
+#define UFS_CRYPTO_KEY_MAX_SIZE 64
+/* x-CRYPTOCFG - Crypto Configuration X */
+union ufs_crypto_cfg_entry {
+	__le32 reg_val[32];
+	struct {
+		u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
+		u8 data_unit_size;
+		u8 crypto_cap_idx;
+		u8 reserved_1;
+		u8 config_enable;
+		u8 reserved_multi_host;
+		u8 reserved_2;
+		u8 vsb[2];
+		u8 reserved_3[56];
+	};
+};
+
 /*
  * Request Descriptor Definitions
  */
@@ -337,6 +396,7 @@ enum {
 	UTP_NATIVE_UFS_COMMAND		= 0x10000000,
 	UTP_DEVICE_MANAGEMENT_FUNCTION	= 0x20000000,
 	UTP_REQ_DESC_INT_CMD		= 0x01000000,
+	UTP_REQ_DESC_CRYPTO_ENABLE_CMD	= 0x00800000,
 };
 
 /* UTP Transfer Request Data Direction (DD) */
@@ -356,6 +416,9 @@ enum {
 	OCS_PEER_COMM_FAILURE		= 0x5,
 	OCS_ABORTED			= 0x6,
 	OCS_FATAL_ERROR			= 0x7,
+	OCS_DEVICE_FATAL_ERROR		= 0x8,
+	OCS_INVALID_CRYPTO_CONFIG	= 0x9,
+	OCS_GENERAL_CRYPTO_ERROR	= 0xA,
 	OCS_INVALID_COMMAND_STATUS	= 0x0F,
 	MASK_OCS			= 0x0F,
 };
-- 
2.21.0.1020.gf2820cf01a-goog

  parent reply	other threads:[~2019-05-06 22:42 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-06 22:35 [RFC PATCH 0/4] Inline Encryption Support Satya Tangirala
2019-05-06 22:35 ` [RFC PATCH 1/4] block: Block Layer changes for " Satya Tangirala
2019-05-06 23:54   ` Randy Dunlap
2019-05-07  0:37   ` Bart Van Assche
2019-05-08  2:12   ` Randy Dunlap
2019-05-06 22:35 ` Satya Tangirala [this message]
2019-05-06 23:51   ` [RFC PATCH 2/4] scsi: ufs: UFS driver v2.1 crypto support Randy Dunlap
2019-05-07  0:39   ` Bart Van Assche
2019-05-07  9:23   ` Avri Altman
2019-05-06 22:35 ` [RFC PATCH 3/4] fscrypt: wire up fscrypt to use blk-crypto Satya Tangirala
2019-05-07  1:23   ` Bart Van Assche
2019-05-06 22:35 ` [RFC PATCH 4/4] f2fs: Wire up f2fs to use inline encryption via fscrypt Satya Tangirala
2019-05-07  1:25   ` Bart Van Assche
2019-05-08  3:02   ` Chao Yu
2019-05-08  3:02     ` Chao Yu
2019-05-08  3:02     ` Chao Yu
2019-05-07  0:26 ` [RFC PATCH 0/4] Inline Encryption Support Bart Van Assche
2019-05-07  9:35 ` Chao Yu
2019-05-07  9:35   ` Chao Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190506223544.195371-3-satyat@google.com \
    --to=satyat@google.com \
    --cc=bmuthuku@qti.qualcomm.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=ladvine.dalmeida@synopsys.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fscrypt@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=pthombar@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.