From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> To: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, Philipp Tomsich <philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>, Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org> Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>, u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org Subject: [PATCH 5/8] rockchip: rk3399: Enable SPL_BOARD_INIT Date: Wed, 8 May 2019 13:39:01 +0530 [thread overview] Message-ID: <20190508080904.1567-6-jagan@amarulasolutions.com> (raw) In-Reply-To: <20190508080904.1567-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Enable SPL_BOARD_INIT globally to rk3399, this would help to print the SPL banner during bootup. Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- arch/arm/mach-rockchip/Kconfig | 1 + configs/puma-rk3399_defconfig | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index c05e3c3f48..ce039022df 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -158,6 +158,7 @@ config ROCKCHIP_RK3399 select SPL select SPL_ATF select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF + select SPL_BOARD_INIT if SPL select SPL_LOAD_FIT select SPL_CLK if SPL select SPL_PINCTRL if SPL diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index ebc78fb216..5cb2273a15 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -21,7 +21,6 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_TEXT_BASE=0xff8c2000 -CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y -- 2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH 5/8] rockchip: rk3399: Enable SPL_BOARD_INIT Date: Wed, 8 May 2019 13:39:01 +0530 [thread overview] Message-ID: <20190508080904.1567-6-jagan@amarulasolutions.com> (raw) In-Reply-To: <20190508080904.1567-1-jagan@amarulasolutions.com> Enable SPL_BOARD_INIT globally to rk3399, this would help to print the SPL banner during bootup. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/mach-rockchip/Kconfig | 1 + configs/puma-rk3399_defconfig | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index c05e3c3f48..ce039022df 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -158,6 +158,7 @@ config ROCKCHIP_RK3399 select SPL select SPL_ATF select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF + select SPL_BOARD_INIT if SPL select SPL_LOAD_FIT select SPL_CLK if SPL select SPL_PINCTRL if SPL diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index ebc78fb216..5cb2273a15 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -21,7 +21,6 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_TEXT_BASE=0xff8c2000 -CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y -- 2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-05-08 8:09 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-08 8:08 [PATCH 0/8] rockchip: rk3399: Use spl_board_init in SPL, TPL Jagan Teki 2019-05-08 8:08 ` [U-Boot] " Jagan Teki [not found] ` <20190508080904.1567-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2019-05-08 8:08 ` [PATCH 1/8] board: rk3399: Drop explicit uart enablement in spl_board_init Jagan Teki 2019-05-08 8:08 ` [U-Boot] " Jagan Teki 2019-05-08 8:08 ` [PATCH 2/8] rockchip: rk3399: Support common spl_board_init Jagan Teki 2019-05-08 8:08 ` [U-Boot] " Jagan Teki 2019-05-08 8:08 ` [PATCH 3/8] rockchip: rk3399: spl: Mark printascii into debug Jagan Teki 2019-05-08 8:08 ` [U-Boot] " Jagan Teki 2019-05-08 8:09 ` [PATCH 4/8] rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2 Jagan Teki 2019-05-08 8:09 ` [U-Boot] " Jagan Teki 2019-05-08 8:09 ` Jagan Teki [this message] 2019-05-08 8:09 ` [U-Boot] [PATCH 5/8] rockchip: rk3399: Enable SPL_BOARD_INIT Jagan Teki 2019-05-08 8:09 ` [PATCH 6/8] rockchip: rk3399: tpl: Add spl_board_init Jagan Teki 2019-05-08 8:09 ` [U-Boot] " Jagan Teki 2019-05-08 8:09 ` [PATCH 7/8] rockchip: rk3399: tpl: Mark printascii into debug Jagan Teki 2019-05-08 8:09 ` [U-Boot] " Jagan Teki 2019-05-08 8:09 ` [PATCH 8/8] rockchip: rk3399: Enable TPL_BOARD_INIT Jagan Teki 2019-05-08 8:09 ` [U-Boot] " Jagan Teki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190508080904.1567-6-jagan@amarulasolutions.com \ --to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \ --cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \ --cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \ --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \ --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \ --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.