[PATCH] video: fbdev: mxsfb: Remove driver

[Fabio Estevam <festevam@gmail.com>]

There is a DRM version of the mxsfb driver for quite some time
at drivers/gpu/drm/mxsfb/, so there is no need to keep maintaining
the fbdev version any longer.

Remove the fbdev mxsfb driver in favour of the DRM version.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 drivers/video/fbdev/Kconfig  |   13 +-
 drivers/video/fbdev/Makefile |    1 -
 drivers/video/fbdev/mxsfb.c  | 1036 ----------------------------------
 3 files changed, 1 insertion(+), 1049 deletions(-)
 delete mode 100644 drivers/video/fbdev/mxsfb.c

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index bf6b77b964f1..61c173b0c906 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2171,7 +2171,7 @@ config FB_EP93XX
 
 config FB_PRE_INIT_FB
 	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
-	depends on FB && (FB_MB862XX_LIME || FB_MXS)
+	depends on FB && FB_MB862XX_LIME
 	---help---
 	  Select this option if display contents should be inherited as set by
 	  the bootloader.
@@ -2212,17 +2212,6 @@ config FB_JZ4740
 	help
 	  Framebuffer support for the JZ4740 SoC.
 
-config FB_MXS
-	tristate "MXS LCD framebuffer support"
-	depends on FB && (ARCH_MXS || ARCH_MXC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  Framebuffer support for the MXS SoC.
-
 config FB_PUV3_UNIGFX
 	tristate "PKUnity v3 Unigfx framebuffer support"
 	depends on FB && UNICORE32 && ARCH_PUV3
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 655f2537cac1..7dc4861a93e6 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -131,7 +131,6 @@ obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
-obj-$(CONFIG_FB_MXS)		  += mxsfb.o
 obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
 obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
 
diff --git a/drivers/video/fbdev/mxsfb.c b/drivers/video/fbdev/mxsfb.c
deleted file mode 100644
index 1fdd1eb38fe0..000000000000
--- a/drivers/video/fbdev/mxsfb.c
+++ /dev/null
@@ -1,1036 +0,0 @@
-/*
- * Copyright (C) 2010 Juergen Beisert, Pengutronix
- *
- * This code is based on:
- * Author: Vitaly Wool <vital@embeddedalley.com>
- *
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define DRIVER_NAME "mxsfb"
-
-/**
- * @file
- * @brief LCDIF driver for i.MX23 and i.MX28
- *
- * The LCDIF support four modes of operation
- * - MPU interface (to drive smart displays) -> not supported yet
- * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
- * - Dotclock interface (to drive LC displays with RGB data and sync signals)
- * - DVI (to drive ITU-R BT656)  -> not supported yet
- *
- * This driver depends on a correct setup of the pins used for this purpose
- * (platform specific).
- *
- * For the developer: Don't forget to set the data bus width to the display
- * in the imx_fb_videomode structure. You will else end up with ugly colours.
- * If you fight against jitter you can vary the clock delay. This is a feature
- * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
- * the required value in the imx_fb_videomode structure.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/fb.h>
-#include <linux/regulator/consumer.h>
-#include <video/of_display_timing.h>
-#include <video/of_videomode.h>
-#include <video/videomode.h>
-
-#define REG_SET	4
-#define REG_CLR	8
-
-#define LCDC_CTRL			0x00
-#define LCDC_CTRL1			0x10
-#define LCDC_V4_CTRL2			0x20
-#define LCDC_V3_TRANSFER_COUNT		0x20
-#define LCDC_V4_TRANSFER_COUNT		0x30
-#define LCDC_V4_CUR_BUF			0x40
-#define LCDC_V4_NEXT_BUF		0x50
-#define LCDC_V3_CUR_BUF			0x30
-#define LCDC_V3_NEXT_BUF		0x40
-#define LCDC_TIMING			0x60
-#define LCDC_VDCTRL0			0x70
-#define LCDC_VDCTRL1			0x80
-#define LCDC_VDCTRL2			0x90
-#define LCDC_VDCTRL3			0xa0
-#define LCDC_VDCTRL4			0xb0
-#define LCDC_DVICTRL0			0xc0
-#define LCDC_DVICTRL1			0xd0
-#define LCDC_DVICTRL2			0xe0
-#define LCDC_DVICTRL3			0xf0
-#define LCDC_DVICTRL4			0x100
-#define LCDC_V4_DATA			0x180
-#define LCDC_V3_DATA			0x1b0
-#define LCDC_V4_DEBUG0			0x1d0
-#define LCDC_V3_DEBUG0			0x1f0
-
-#define CTRL_SFTRST			(1 << 31)
-#define CTRL_CLKGATE			(1 << 30)
-#define CTRL_BYPASS_COUNT		(1 << 19)
-#define CTRL_VSYNC_MODE			(1 << 18)
-#define CTRL_DOTCLK_MODE		(1 << 17)
-#define CTRL_DATA_SELECT		(1 << 16)
-#define CTRL_SET_BUS_WIDTH(x)		(((x) & 0x3) << 10)
-#define CTRL_GET_BUS_WIDTH(x)		(((x) >> 10) & 0x3)
-#define CTRL_SET_WORD_LENGTH(x)		(((x) & 0x3) << 8)
-#define CTRL_GET_WORD_LENGTH(x)		(((x) >> 8) & 0x3)
-#define CTRL_MASTER			(1 << 5)
-#define CTRL_DF16			(1 << 3)
-#define CTRL_DF18			(1 << 2)
-#define CTRL_DF24			(1 << 1)
-#define CTRL_RUN			(1 << 0)
-
-#define CTRL1_FIFO_CLEAR		(1 << 21)
-#define CTRL1_SET_BYTE_PACKAGING(x)	(((x) & 0xf) << 16)
-#define CTRL1_GET_BYTE_PACKAGING(x)	(((x) >> 16) & 0xf)
-
-#define TRANSFER_COUNT_SET_VCOUNT(x)	(((x) & 0xffff) << 16)
-#define TRANSFER_COUNT_GET_VCOUNT(x)	(((x) >> 16) & 0xffff)
-#define TRANSFER_COUNT_SET_HCOUNT(x)	((x) & 0xffff)
-#define TRANSFER_COUNT_GET_HCOUNT(x)	((x) & 0xffff)
-
-
-#define VDCTRL0_ENABLE_PRESENT		(1 << 28)
-#define VDCTRL0_VSYNC_ACT_HIGH		(1 << 27)
-#define VDCTRL0_HSYNC_ACT_HIGH		(1 << 26)
-#define VDCTRL0_DOTCLK_ACT_FALLING	(1 << 25)
-#define VDCTRL0_ENABLE_ACT_HIGH		(1 << 24)
-#define VDCTRL0_VSYNC_PERIOD_UNIT	(1 << 21)
-#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	(1 << 20)
-#define VDCTRL0_HALF_LINE		(1 << 19)
-#define VDCTRL0_HALF_LINE_MODE		(1 << 18)
-#define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
-#define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
-
-#define VDCTRL2_SET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
-#define VDCTRL2_GET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
-
-#define VDCTRL3_MUX_SYNC_SIGNALS	(1 << 29)
-#define VDCTRL3_VSYNC_ONLY		(1 << 28)
-#define SET_HOR_WAIT_CNT(x)		(((x) & 0xfff) << 16)
-#define GET_HOR_WAIT_CNT(x)		(((x) >> 16) & 0xfff)
-#define SET_VERT_WAIT_CNT(x)		((x) & 0xffff)
-#define GET_VERT_WAIT_CNT(x)		((x) & 0xffff)
-
-#define VDCTRL4_SET_DOTCLK_DLY(x)	(((x) & 0x7) << 29) /* v4 only */
-#define VDCTRL4_GET_DOTCLK_DLY(x)	(((x) >> 29) & 0x7) /* v4 only */
-#define VDCTRL4_SYNC_SIGNALS_ON		(1 << 18)
-#define SET_DOTCLK_H_VALID_DATA_CNT(x)	((x) & 0x3ffff)
-
-#define DEBUG0_HSYNC			(1 < 26)
-#define DEBUG0_VSYNC			(1 < 25)
-
-#define MIN_XRES			120
-#define MIN_YRES			120
-
-#define RED 0
-#define GREEN 1
-#define BLUE 2
-#define TRANSP 3
-
-#define STMLCDIF_8BIT  1 /** pixel data bus to the display is of 8 bit width */
-#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
-#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
-#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
-
-#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
-#define MXSFB_SYNC_DOTCLK_FALLING_ACT	(1 << 7) /* negative edge sampling */
-
-enum mxsfb_devtype {
-	MXSFB_V3,
-	MXSFB_V4,
-};
-
-/* CPU dependent register offsets */
-struct mxsfb_devdata {
-	unsigned transfer_count;
-	unsigned cur_buf;
-	unsigned next_buf;
-	unsigned debug0;
-	unsigned hs_wdth_mask;
-	unsigned hs_wdth_shift;
-	unsigned ipversion;
-};
-
-struct mxsfb_info {
-	struct platform_device *pdev;
-	struct clk *clk;
-	struct clk *clk_axi;
-	struct clk *clk_disp_axi;
-	void __iomem *base;	/* registers */
-	unsigned allocated_size;
-	int enabled;
-	unsigned ld_intf_width;
-	unsigned dotclk_delay;
-	const struct mxsfb_devdata *devdata;
-	u32 sync;
-	struct regulator *reg_lcd;
-	int pre_init;
-};
-
-#define mxsfb_is_v3(host) (host->devdata->ipversion = 3)
-#define mxsfb_is_v4(host) (host->devdata->ipversion = 4)
-
-static const struct mxsfb_devdata mxsfb_devdata[] = {
-	[MXSFB_V3] = {
-		.transfer_count = LCDC_V3_TRANSFER_COUNT,
-		.cur_buf = LCDC_V3_CUR_BUF,
-		.next_buf = LCDC_V3_NEXT_BUF,
-		.debug0 = LCDC_V3_DEBUG0,
-		.hs_wdth_mask = 0xff,
-		.hs_wdth_shift = 24,
-		.ipversion = 3,
-	},
-	[MXSFB_V4] = {
-		.transfer_count = LCDC_V4_TRANSFER_COUNT,
-		.cur_buf = LCDC_V4_CUR_BUF,
-		.next_buf = LCDC_V4_NEXT_BUF,
-		.debug0 = LCDC_V4_DEBUG0,
-		.hs_wdth_mask = 0x3fff,
-		.hs_wdth_shift = 18,
-		.ipversion = 4,
-	},
-};
-
-/* mask and shift depends on architecture */
-static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
-{
-	return (val & host->devdata->hs_wdth_mask) <<
-		host->devdata->hs_wdth_shift;
-}
-
-static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
-{
-	return (val >> host->devdata->hs_wdth_shift) &
-		host->devdata->hs_wdth_mask;
-}
-
-static const struct fb_bitfield def_rgb565[] = {
-	[RED] = {
-		.offset = 11,
-		.length = 5,
-	},
-	[GREEN] = {
-		.offset = 5,
-		.length = 6,
-	},
-	[BLUE] = {
-		.offset = 0,
-		.length = 5,
-	},
-	[TRANSP] = {	/* no support for transparency */
-		.length = 0,
-	}
-};
-
-static const struct fb_bitfield def_rgb888[] = {
-	[RED] = {
-		.offset = 16,
-		.length = 8,
-	},
-	[GREEN] = {
-		.offset = 8,
-		.length = 8,
-	},
-	[BLUE] = {
-		.offset = 0,
-		.length = 8,
-	},
-	[TRANSP] = {	/* no support for transparency */
-		.length = 0,
-	}
-};
-
-static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf)
-{
-	chan &= 0xffff;
-	chan >>= 16 - bf->length;
-	return chan << bf->offset;
-}
-
-static int mxsfb_check_var(struct fb_var_screeninfo *var,
-		struct fb_info *fb_info)
-{
-	struct mxsfb_info *host = fb_info->par;
-	const struct fb_bitfield *rgb = NULL;
-
-	if (var->xres < MIN_XRES)
-		var->xres = MIN_XRES;
-	if (var->yres < MIN_YRES)
-		var->yres = MIN_YRES;
-
-	var->xres_virtual = var->xres;
-
-	var->yres_virtual = var->yres;
-
-	switch (var->bits_per_pixel) {
-	case 16:
-		/* always expect RGB 565 */
-		rgb = def_rgb565;
-		break;
-	case 32:
-		switch (host->ld_intf_width) {
-		case STMLCDIF_8BIT:
-			pr_debug("Unsupported LCD bus width mapping\n");
-			break;
-		case STMLCDIF_16BIT:
-		case STMLCDIF_18BIT:
-		case STMLCDIF_24BIT:
-			/* real 24 bit */
-			rgb = def_rgb888;
-			break;
-		}
-		break;
-	default:
-		pr_err("Unsupported colour depth: %u\n", var->bits_per_pixel);
-		return -EINVAL;
-	}
-
-	/*
-	 * Copy the RGB parameters for this display
-	 * from the machine specific parameters.
-	 */
-	var->red    = rgb[RED];
-	var->green  = rgb[GREEN];
-	var->blue   = rgb[BLUE];
-	var->transp = rgb[TRANSP];
-
-	return 0;
-}
-
-static inline void mxsfb_enable_axi_clk(struct mxsfb_info *host)
-{
-	if (host->clk_axi)
-		clk_prepare_enable(host->clk_axi);
-}
-
-static inline void mxsfb_disable_axi_clk(struct mxsfb_info *host)
-{
-	if (host->clk_axi)
-		clk_disable_unprepare(host->clk_axi);
-}
-
-static void mxsfb_enable_controller(struct fb_info *fb_info)
-{
-	struct mxsfb_info *host = fb_info->par;
-	u32 reg;
-	int ret;
-
-	dev_dbg(&host->pdev->dev, "%s\n", __func__);
-
-	if (host->reg_lcd) {
-		ret = regulator_enable(host->reg_lcd);
-		if (ret) {
-			dev_err(&host->pdev->dev,
-				"lcd regulator enable failed:	%d\n", ret);
-			return;
-		}
-	}
-
-	if (host->clk_disp_axi)
-		clk_prepare_enable(host->clk_disp_axi);
-	clk_prepare_enable(host->clk);
-	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
-
-	mxsfb_enable_axi_clk(host);
-
-	/* if it was disabled, re-enable the mode again */
-	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET);
-
-	/* enable the SYNC signals first, then the DMA engine */
-	reg = readl(host->base + LCDC_VDCTRL4);
-	reg |= VDCTRL4_SYNC_SIGNALS_ON;
-	writel(reg, host->base + LCDC_VDCTRL4);
-
-	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET);
-
-	host->enabled = 1;
-}
-
-static void mxsfb_disable_controller(struct fb_info *fb_info)
-{
-	struct mxsfb_info *host = fb_info->par;
-	unsigned loop;
-	u32 reg;
-	int ret;
-
-	dev_dbg(&host->pdev->dev, "%s\n", __func__);
-
-	/*
-	 * Even if we disable the controller here, it will still continue
-	 * until its FIFOs are running out of data
-	 */
-	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR);
-
-	loop = 1000;
-	while (loop) {
-		reg = readl(host->base + LCDC_CTRL);
-		if (!(reg & CTRL_RUN))
-			break;
-		loop--;
-	}
-
-	reg = readl(host->base + LCDC_VDCTRL4);
-	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
-
-	mxsfb_disable_axi_clk(host);
-
-	clk_disable_unprepare(host->clk);
-	if (host->clk_disp_axi)
-		clk_disable_unprepare(host->clk_disp_axi);
-
-	host->enabled = 0;
-
-	if (host->reg_lcd) {
-		ret = regulator_disable(host->reg_lcd);
-		if (ret)
-			dev_err(&host->pdev->dev,
-				"lcd regulator disable failed: %d\n", ret);
-	}
-}
-
-static int mxsfb_set_par(struct fb_info *fb_info)
-{
-	struct mxsfb_info *host = fb_info->par;
-	u32 ctrl, vdctrl0, vdctrl4;
-	int line_size, fb_size;
-	int reenable = 0;
-
-	line_size =  fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3);
-	fb_size = fb_info->var.yres_virtual * line_size;
-
-	if (fb_size > fb_info->fix.smem_len)
-		return -ENOMEM;
-
-	fb_info->fix.line_length = line_size;
-
-	if (host->pre_init) {
-		mxsfb_enable_controller(fb_info);
-		host->pre_init = 0;
-		return 0;
-	}
-
-	/*
-	 * It seems, you can't re-program the controller if it is still running.
-	 * This may lead into shifted pictures (FIFO issue?).
-	 * So, first stop the controller and drain its FIFOs
-	 */
-	if (host->enabled) {
-		reenable = 1;
-		mxsfb_disable_controller(fb_info);
-	}
-
-	mxsfb_enable_axi_clk(host);
-
-	/* clear the FIFOs */
-	writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
-
-	ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER |
-		CTRL_SET_BUS_WIDTH(host->ld_intf_width);
-
-	switch (fb_info->var.bits_per_pixel) {
-	case 16:
-		dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n");
-		ctrl |= CTRL_SET_WORD_LENGTH(0);
-		writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1);
-		break;
-	case 32:
-		dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n");
-		ctrl |= CTRL_SET_WORD_LENGTH(3);
-		switch (host->ld_intf_width) {
-		case STMLCDIF_8BIT:
-			mxsfb_disable_axi_clk(host);
-			dev_err(&host->pdev->dev,
-					"Unsupported LCD bus width mapping\n");
-			return -EINVAL;
-		case STMLCDIF_16BIT:
-		case STMLCDIF_18BIT:
-		case STMLCDIF_24BIT:
-			/* real 24 bit */
-			break;
-		}
-		/* do not use packed pixels = one pixel per word instead */
-		writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1);
-		break;
-	default:
-		mxsfb_disable_axi_clk(host);
-		dev_err(&host->pdev->dev, "Unhandled color depth of %u\n",
-				fb_info->var.bits_per_pixel);
-		return -EINVAL;
-	}
-
-	writel(ctrl, host->base + LCDC_CTRL);
-
-	writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) |
-			TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres),
-			host->base + host->devdata->transfer_count);
-
-	vdctrl0 = VDCTRL0_ENABLE_PRESENT |	/* always in DOTCLOCK mode */
-		VDCTRL0_VSYNC_PERIOD_UNIT |
-		VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
-		VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len);
-	if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT)
-		vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
-	if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
-		vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
-	if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
-		vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
-	if (host->sync & MXSFB_SYNC_DOTCLK_FALLING_ACT)
-		vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
-
-	writel(vdctrl0, host->base + LCDC_VDCTRL0);
-
-	/* frame length in lines */
-	writel(fb_info->var.upper_margin + fb_info->var.vsync_len +
-		fb_info->var.lower_margin + fb_info->var.yres,
-		host->base + LCDC_VDCTRL1);
-
-	/* line length in units of clocks or pixels */
-	writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) |
-		VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin +
-		fb_info->var.hsync_len + fb_info->var.right_margin +
-		fb_info->var.xres),
-		host->base + LCDC_VDCTRL2);
-
-	writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin +
-		fb_info->var.hsync_len) |
-		SET_VERT_WAIT_CNT(fb_info->var.upper_margin +
-			fb_info->var.vsync_len),
-		host->base + LCDC_VDCTRL3);
-
-	vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres);
-	if (mxsfb_is_v4(host))
-		vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay);
-	writel(vdctrl4, host->base + LCDC_VDCTRL4);
-
-	writel(fb_info->fix.smem_start +
-			fb_info->fix.line_length * fb_info->var.yoffset,
-			host->base + host->devdata->next_buf);
-
-	mxsfb_disable_axi_clk(host);
-
-	if (reenable)
-		mxsfb_enable_controller(fb_info);
-
-	return 0;
-}
-
-static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-		u_int transp, struct fb_info *fb_info)
-{
-	unsigned int val;
-	int ret = -EINVAL;
-
-	/*
-	 * If greyscale is true, then we convert the RGB value
-	 * to greyscale no matter what visual we are using.
-	 */
-	if (fb_info->var.grayscale)
-		red = green = blue = (19595 * red + 38470 * green +
-					7471 * blue) >> 16;
-
-	switch (fb_info->fix.visual) {
-	case FB_VISUAL_TRUECOLOR:
-		/*
-		 * 12 or 16-bit True Colour.  We encode the RGB value
-		 * according to the RGB bitfield information.
-		 */
-		if (regno < 16) {
-			u32 *pal = fb_info->pseudo_palette;
-
-			val  = chan_to_field(red, &fb_info->var.red);
-			val |= chan_to_field(green, &fb_info->var.green);
-			val |= chan_to_field(blue, &fb_info->var.blue);
-
-			pal[regno] = val;
-			ret = 0;
-		}
-		break;
-
-	case FB_VISUAL_STATIC_PSEUDOCOLOR:
-	case FB_VISUAL_PSEUDOCOLOR:
-		break;
-	}
-
-	return ret;
-}
-
-static int mxsfb_blank(int blank, struct fb_info *fb_info)
-{
-	struct mxsfb_info *host = fb_info->par;
-
-	switch (blank) {
-	case FB_BLANK_POWERDOWN:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_NORMAL:
-		if (host->enabled)
-			mxsfb_disable_controller(fb_info);
-		break;
-
-	case FB_BLANK_UNBLANK:
-		if (!host->enabled)
-			mxsfb_enable_controller(fb_info);
-		break;
-	}
-	return 0;
-}
-
-static int mxsfb_pan_display(struct fb_var_screeninfo *var,
-		struct fb_info *fb_info)
-{
-	struct mxsfb_info *host = fb_info->par;
-	unsigned offset;
-
-	if (var->xoffset != 0)
-		return -EINVAL;
-
-	offset = fb_info->fix.line_length * var->yoffset;
-
-	mxsfb_enable_axi_clk(host);
-
-	/* update on next VSYNC */
-	writel(fb_info->fix.smem_start + offset,
-			host->base + host->devdata->next_buf);
-
-	mxsfb_disable_axi_clk(host);
-
-	return 0;
-}
-
-static struct fb_ops mxsfb_ops = {
-	.owner = THIS_MODULE,
-	.fb_check_var = mxsfb_check_var,
-	.fb_set_par = mxsfb_set_par,
-	.fb_setcolreg = mxsfb_setcolreg,
-	.fb_blank = mxsfb_blank,
-	.fb_pan_display = mxsfb_pan_display,
-	.fb_fillrect = cfb_fillrect,
-	.fb_copyarea = cfb_copyarea,
-	.fb_imageblit = cfb_imageblit,
-};
-
-static int mxsfb_restore_mode(struct fb_info *fb_info,
-			struct fb_videomode *vmode)
-{
-	struct mxsfb_info *host = fb_info->par;
-	unsigned period;
-	unsigned long pa, fbsize;
-	int bits_per_pixel, ofs, ret = 0;
-	u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl;
-
-	mxsfb_enable_axi_clk(host);
-
-	/* Only restore the mode when the controller is running */
-	ctrl = readl(host->base + LCDC_CTRL);
-	if (!(ctrl & CTRL_RUN)) {
-		ret = -EINVAL;
-		goto err;
-	}
-
-	vdctrl0 = readl(host->base + LCDC_VDCTRL0);
-	vdctrl2 = readl(host->base + LCDC_VDCTRL2);
-	vdctrl3 = readl(host->base + LCDC_VDCTRL3);
-	vdctrl4 = readl(host->base + LCDC_VDCTRL4);
-
-	transfer_count = readl(host->base + host->devdata->transfer_count);
-
-	vmode->xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count);
-	vmode->yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count);
-
-	switch (CTRL_GET_WORD_LENGTH(ctrl)) {
-	case 0:
-		bits_per_pixel = 16;
-		break;
-	case 3:
-		bits_per_pixel = 32;
-		break;
-	case 1:
-	default:
-		ret = -EINVAL;
-		goto err;
-	}
-
-	fb_info->var.bits_per_pixel = bits_per_pixel;
-
-	vmode->pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U);
-	vmode->hsync_len = get_hsync_pulse_width(host, vdctrl2);
-	vmode->left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode->hsync_len;
-	vmode->right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) -
-		vmode->hsync_len - vmode->left_margin - vmode->xres;
-	vmode->vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0);
-	period = readl(host->base + LCDC_VDCTRL1);
-	vmode->upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode->vsync_len;
-	vmode->lower_margin = period - vmode->vsync_len -
-		vmode->upper_margin - vmode->yres;
-
-	vmode->vmode = FB_VMODE_NONINTERLACED;
-
-	vmode->sync = 0;
-	if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH)
-		vmode->sync |= FB_SYNC_HOR_HIGH_ACT;
-	if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH)
-		vmode->sync |= FB_SYNC_VERT_HIGH_ACT;
-
-	pr_debug("Reconstructed video mode:\n");
-	pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
-		vmode->xres, vmode->yres, vmode->hsync_len, vmode->left_margin,
-		vmode->right_margin, vmode->vsync_len, vmode->upper_margin,
-		vmode->lower_margin);
-	pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode->pixclock));
-
-	host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl);
-	host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4);
-
-	fb_info->fix.line_length = vmode->xres * (bits_per_pixel >> 3);
-
-	pa = readl(host->base + host->devdata->cur_buf);
-	fbsize = fb_info->fix.line_length * vmode->yres;
-	if (pa < fb_info->fix.smem_start) {
-		ret = -EINVAL;
-		goto err;
-	}
-	if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len) {
-		ret = -EINVAL;
-		goto err;
-	}
-	ofs = pa - fb_info->fix.smem_start;
-	if (ofs) {
-		memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize);
-		writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf);
-	}
-
-	fb_info->fix.ypanstep = 1;
-
-	clk_prepare_enable(host->clk);
-	host->enabled = 1;
-
-err:
-	if (ret)
-		mxsfb_disable_axi_clk(host);
-
-	return ret;
-}
-
-static int mxsfb_init_fbinfo_dt(struct fb_info *fb_info,
-				struct fb_videomode *vmode)
-{
-	struct mxsfb_info *host = fb_info->par;
-	struct fb_var_screeninfo *var = &fb_info->var;
-	struct device *dev = &host->pdev->dev;
-	struct device_node *np = host->pdev->dev.of_node;
-	struct device_node *display_np;
-	struct videomode vm;
-	u32 width;
-	int ret;
-
-	display_np = of_parse_phandle(np, "display", 0);
-	if (!display_np) {
-		dev_err(dev, "failed to find display phandle\n");
-		return -ENOENT;
-	}
-
-	ret = of_property_read_u32(display_np, "bus-width", &width);
-	if (ret < 0) {
-		dev_err(dev, "failed to get property bus-width\n");
-		goto put_display_node;
-	}
-
-	switch (width) {
-	case 8:
-		host->ld_intf_width = STMLCDIF_8BIT;
-		break;
-	case 16:
-		host->ld_intf_width = STMLCDIF_16BIT;
-		break;
-	case 18:
-		host->ld_intf_width = STMLCDIF_18BIT;
-		break;
-	case 24:
-		host->ld_intf_width = STMLCDIF_24BIT;
-		break;
-	default:
-		dev_err(dev, "invalid bus-width value\n");
-		ret = -EINVAL;
-		goto put_display_node;
-	}
-
-	ret = of_property_read_u32(display_np, "bits-per-pixel",
-				   &var->bits_per_pixel);
-	if (ret < 0) {
-		dev_err(dev, "failed to get property bits-per-pixel\n");
-		goto put_display_node;
-	}
-
-	ret = of_get_videomode(display_np, &vm, OF_USE_NATIVE_MODE);
-	if (ret) {
-		dev_err(dev, "failed to get videomode from DT\n");
-		goto put_display_node;
-	}
-
-	ret = fb_videomode_from_videomode(&vm, vmode);
-	if (ret < 0)
-		goto put_display_node;
-
-	if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
-		host->sync |= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
-
-	/*
-	 * The PIXDATA flags of the display_flags enum are controller
-	 * centric, e.g. NEGEDGE means drive data on negative edge.
-	 * However, the drivers flag is display centric: Sample the
-	 * data on negative (falling) edge. Therefore, check for the
-	 * POSEDGE flag:
-	 * drive on positive edge => sample on negative edge
-	 */
-	if (vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
-		host->sync |= MXSFB_SYNC_DOTCLK_FALLING_ACT;
-
-put_display_node:
-	of_node_put(display_np);
-	return ret;
-}
-
-static int mxsfb_init_fbinfo(struct fb_info *fb_info,
-			struct fb_videomode *vmode)
-{
-	int ret;
-	struct mxsfb_info *host = fb_info->par;
-	struct device *dev = &host->pdev->dev;
-	struct fb_var_screeninfo *var = &fb_info->var;
-	dma_addr_t fb_phys;
-	void *fb_virt;
-	unsigned fb_size;
-
-	fb_info->fbops = &mxsfb_ops;
-	fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
-	strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id));
-	fb_info->fix.type = FB_TYPE_PACKED_PIXELS;
-	fb_info->fix.ypanstep = 1;
-	fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
-	fb_info->fix.accel = FB_ACCEL_NONE;
-
-	ret = mxsfb_init_fbinfo_dt(fb_info, vmode);
-	if (ret)
-		return ret;
-
-	var->nonstd = 0;
-	var->activate = FB_ACTIVATE_NOW;
-	var->accel_flags = 0;
-	var->vmode = FB_VMODE_NONINTERLACED;
-
-	/* Memory allocation for framebuffer */
-	fb_size = SZ_2M;
-	fb_virt = dma_alloc_wc(dev, PAGE_ALIGN(fb_size), &fb_phys, GFP_KERNEL);
-	if (!fb_virt)
-		return -ENOMEM;
-
-	fb_info->fix.smem_start = fb_phys;
-	fb_info->screen_base = fb_virt;
-	fb_info->screen_size = fb_info->fix.smem_len = fb_size;
-
-	if (mxsfb_restore_mode(fb_info, vmode))
-		memset(fb_virt, 0, fb_size);
-
-	return 0;
-}
-
-static void mxsfb_free_videomem(struct fb_info *fb_info)
-{
-	struct mxsfb_info *host = fb_info->par;
-	struct device *dev = &host->pdev->dev;
-
-	dma_free_wc(dev, fb_info->screen_size, fb_info->screen_base,
-		    fb_info->fix.smem_start);
-}
-
-static const struct platform_device_id mxsfb_devtype[] = {
-	{
-		.name = "imx23-fb",
-		.driver_data = MXSFB_V3,
-	}, {
-		.name = "imx28-fb",
-		.driver_data = MXSFB_V4,
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
-
-static const struct of_device_id mxsfb_dt_ids[] = {
-	{ .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
-	{ .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
-
-static int mxsfb_probe(struct platform_device *pdev)
-{
-	const struct of_device_id *of_id -			of_match_device(mxsfb_dt_ids, &pdev->dev);
-	struct resource *res;
-	struct mxsfb_info *host;
-	struct fb_info *fb_info;
-	struct fb_videomode *mode;
-	int ret;
-
-	if (of_id)
-		pdev->id_entry = of_id->data;
-
-	fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
-	if (!fb_info) {
-		dev_err(&pdev->dev, "Failed to allocate fbdev\n");
-		return -ENOMEM;
-	}
-
-	mode = devm_kzalloc(&pdev->dev, sizeof(struct fb_videomode),
-			GFP_KERNEL);
-	if (mode = NULL)
-		return -ENOMEM;
-
-	host = fb_info->par;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	host->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(host->base)) {
-		ret = PTR_ERR(host->base);
-		goto fb_release;
-	}
-
-	host->pdev = pdev;
-	platform_set_drvdata(pdev, host);
-
-	host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
-
-	host->clk = devm_clk_get(&host->pdev->dev, NULL);
-	if (IS_ERR(host->clk)) {
-		ret = PTR_ERR(host->clk);
-		goto fb_release;
-	}
-
-	host->clk_axi = devm_clk_get(&host->pdev->dev, "axi");
-	if (IS_ERR(host->clk_axi))
-		host->clk_axi = NULL;
-
-	host->clk_disp_axi = devm_clk_get(&host->pdev->dev, "disp_axi");
-	if (IS_ERR(host->clk_disp_axi))
-		host->clk_disp_axi = NULL;
-
-	host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
-	if (IS_ERR(host->reg_lcd))
-		host->reg_lcd = NULL;
-
-#if defined(CONFIG_FB_PRE_INIT_FB)
-	host->pre_init = 1;
-#endif
-
-	fb_info->pseudo_palette = devm_kcalloc(&pdev->dev, 16, sizeof(u32),
-					       GFP_KERNEL);
-	if (!fb_info->pseudo_palette) {
-		ret = -ENOMEM;
-		goto fb_release;
-	}
-
-	ret = mxsfb_init_fbinfo(fb_info, mode);
-	if (ret != 0)
-		goto fb_release;
-
-	fb_videomode_to_var(&fb_info->var, mode);
-
-	/* init the color fields */
-	mxsfb_check_var(&fb_info->var, fb_info);
-
-	platform_set_drvdata(pdev, fb_info);
-
-	ret = register_framebuffer(fb_info);
-	if (ret != 0) {
-		dev_err(&pdev->dev,"Failed to register framebuffer\n");
-		goto fb_destroy;
-	}
-
-	if (!host->enabled) {
-		mxsfb_enable_axi_clk(host);
-		writel(0, host->base + LCDC_CTRL);
-		mxsfb_disable_axi_clk(host);
-		mxsfb_set_par(fb_info);
-		mxsfb_enable_controller(fb_info);
-	}
-
-	host->pre_init = 0;
-	dev_info(&pdev->dev, "initialized\n");
-
-	return 0;
-
-fb_destroy:
-	if (host->enabled)
-		clk_disable_unprepare(host->clk);
-fb_release:
-	framebuffer_release(fb_info);
-
-	return ret;
-}
-
-static int mxsfb_remove(struct platform_device *pdev)
-{
-	struct fb_info *fb_info = platform_get_drvdata(pdev);
-	struct mxsfb_info *host = fb_info->par;
-
-	if (host->enabled)
-		mxsfb_disable_controller(fb_info);
-
-	unregister_framebuffer(fb_info);
-	mxsfb_free_videomem(fb_info);
-
-	framebuffer_release(fb_info);
-
-	return 0;
-}
-
-static void mxsfb_shutdown(struct platform_device *pdev)
-{
-	struct fb_info *fb_info = platform_get_drvdata(pdev);
-	struct mxsfb_info *host = fb_info->par;
-
-	mxsfb_enable_axi_clk(host);
-
-	/*
-	 * Force stop the LCD controller as keeping it running during reboot
-	 * might interfere with the BootROM's boot mode pads sampling.
-	 */
-	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
-
-	mxsfb_disable_axi_clk(host);
-}
-
-static struct platform_driver mxsfb_driver = {
-	.probe = mxsfb_probe,
-	.remove = mxsfb_remove,
-	.shutdown = mxsfb_shutdown,
-	.id_table = mxsfb_devtype,
-	.driver = {
-		   .name = DRIVER_NAME,
-		   .of_match_table = mxsfb_dt_ids,
-	},
-};
-
-module_platform_driver(mxsfb_driver);
-
-MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
-MODULE_AUTHOR("Sascha Hauer, Pengutronix");
-MODULE_LICENSE("GPL");
-- 
2.17.1