From: Jerome Brunet <jbrunet@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com>, devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 4/5] arm64: dts: meson: u200: add internal network Date: Mon, 20 May 2019 15:14:00 +0200 [thread overview] Message-ID: <20190520131401.11804-5-jbrunet@baylibre.com> (raw) In-Reply-To: <20190520131401.11804-1-jbrunet@baylibre.com> The u200 is the main mother board for the S905D2. It can provide both the internal and external network. However, by default the resistance required for the external RGMII bus are not fitted, so enable the internal PHY. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index e02534ab7673..8551fbd4a488 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { @@ -150,6 +151,12 @@ }; }; +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, Jerome Brunet <jbrunet@baylibre.com> Subject: [PATCH v2 4/5] arm64: dts: meson: u200: add internal network Date: Mon, 20 May 2019 15:14:00 +0200 [thread overview] Message-ID: <20190520131401.11804-5-jbrunet@baylibre.com> (raw) In-Reply-To: <20190520131401.11804-1-jbrunet@baylibre.com> The u200 is the main mother board for the S905D2. It can provide both the internal and external network. However, by default the resistance required for the external RGMII bus are not fitted, so enable the internal PHY. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index e02534ab7673..8551fbd4a488 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { @@ -150,6 +151,12 @@ }; }; +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-20 13:14 UTC|newest] Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-20 13:13 [PATCH v2 0/5] arm64: dts: meson: g12a: add ethernet support Jerome Brunet 2019-05-20 13:13 ` Jerome Brunet 2019-05-20 13:13 ` [PATCH v2 1/5] arm64: dts: meson: g12a: add ethernet mac controller Jerome Brunet 2019-05-20 13:13 ` Jerome Brunet 2019-05-20 17:29 ` Martin Blumenstingl 2019-05-20 17:29 ` Martin Blumenstingl 2019-05-20 13:13 ` [PATCH v2 2/5] arm64: dts: meson: g12a: add ethernet pinctrl definitions Jerome Brunet 2019-05-20 13:13 ` Jerome Brunet 2019-05-20 17:29 ` Martin Blumenstingl 2019-05-20 17:29 ` Martin Blumenstingl 2019-05-20 13:13 ` [PATCH v2 3/5] arm64: dts: meson: g12a: add mdio multiplexer Jerome Brunet 2019-05-20 13:13 ` Jerome Brunet 2019-05-20 17:37 ` Martin Blumenstingl 2019-05-20 17:37 ` Martin Blumenstingl 2019-05-20 19:05 ` Andrew Lunn 2019-05-20 19:05 ` Andrew Lunn 2019-05-20 21:51 ` Jerome Brunet 2019-05-20 21:51 ` Jerome Brunet 2019-05-23 17:18 ` Kevin Hilman 2019-05-23 17:18 ` Kevin Hilman 2019-05-20 13:14 ` Jerome Brunet [this message] 2019-05-20 13:14 ` [PATCH v2 4/5] arm64: dts: meson: u200: add internal network Jerome Brunet 2019-05-20 17:38 ` Martin Blumenstingl 2019-05-20 17:38 ` Martin Blumenstingl 2019-05-20 13:14 ` [PATCH v2 5/5] arm64: dts: meson: sei510: add network support Jerome Brunet 2019-05-20 13:14 ` Jerome Brunet 2019-05-20 17:38 ` Martin Blumenstingl 2019-05-20 17:38 ` Martin Blumenstingl 2019-05-20 17:49 ` [PATCH v2 0/5] arm64: dts: meson: g12a: add ethernet support Kevin Hilman 2019-05-20 17:49 ` Kevin Hilman 2019-05-20 17:49 ` Kevin Hilman 2019-05-20 18:50 ` Kevin Hilman 2019-05-20 18:50 ` Kevin Hilman 2019-05-20 18:50 ` Kevin Hilman 2019-05-23 17:20 ` Kevin Hilman 2019-05-23 17:20 ` Kevin Hilman 2019-05-23 17:20 ` Kevin Hilman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190520131401.11804-5-jbrunet@baylibre.com \ --to=jbrunet@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=khilman@baylibre.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.