From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node
Date: Mon, 20 May 2019 15:48:17 +0200 [thread overview]
Message-ID: <20190520134817.25435-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190520134817.25435-1-narmstrong@baylibre.com>
The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.
The hwrng is not enabled on the vendor G12A DTs, but is enabled on
next generation SM1 SoC family sharing the exact same memory mapping.
Let's add the "EFUSE" bus and the hwrng node.
This hwrng has been checked with the rng-tools rngtest FIPS tool :
rngtest: starting FIPS tests...
rngtest: bits received from input: 1630240032
rngtest: FIPS 140-2 successes: 81436
rngtest: FIPS 140-2 failures: 76
rngtest: FIPS 140-2(2001-10-10) Monobit: 10
rngtest: FIPS 140-2(2001-10-10) Poker: 6
rngtest: FIPS 140-2(2001-10-10) Runs: 26
rngtest: FIPS 140-2(2001-10-10) Long run: 34
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
rngtest: Program run time: 30000987 microseconds
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 8fcdd12f684a..19ef6a467d63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -197,6 +197,19 @@
};
};
+ apb_efuse: bus@30000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x30000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
+
+ hwrng: rng {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x218 0x0 0x4>;
+ };
+ };
+
periphs: bus@34400 {
compatible = "simple-bus";
reg = <0x0 0x34400 0x0 0x400>;
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node
Date: Mon, 20 May 2019 15:48:17 +0200 [thread overview]
Message-ID: <20190520134817.25435-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190520134817.25435-1-narmstrong@baylibre.com>
The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.
The hwrng is not enabled on the vendor G12A DTs, but is enabled on
next generation SM1 SoC family sharing the exact same memory mapping.
Let's add the "EFUSE" bus and the hwrng node.
This hwrng has been checked with the rng-tools rngtest FIPS tool :
rngtest: starting FIPS tests...
rngtest: bits received from input: 1630240032
rngtest: FIPS 140-2 successes: 81436
rngtest: FIPS 140-2 failures: 76
rngtest: FIPS 140-2(2001-10-10) Monobit: 10
rngtest: FIPS 140-2(2001-10-10) Poker: 6
rngtest: FIPS 140-2(2001-10-10) Runs: 26
rngtest: FIPS 140-2(2001-10-10) Long run: 34
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
rngtest: Program run time: 30000987 microseconds
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 8fcdd12f684a..19ef6a467d63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -197,6 +197,19 @@
};
};
+ apb_efuse: bus@30000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x30000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
+
+ hwrng: rng {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x218 0x0 0x4>;
+ };
+ };
+
periphs: bus@34400 {
compatible = "simple-bus";
reg = <0x0 0x34400 0x0 0x400>;
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node
Date: Mon, 20 May 2019 15:48:17 +0200 [thread overview]
Message-ID: <20190520134817.25435-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190520134817.25435-1-narmstrong@baylibre.com>
The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.
The hwrng is not enabled on the vendor G12A DTs, but is enabled on
next generation SM1 SoC family sharing the exact same memory mapping.
Let's add the "EFUSE" bus and the hwrng node.
This hwrng has been checked with the rng-tools rngtest FIPS tool :
rngtest: starting FIPS tests...
rngtest: bits received from input: 1630240032
rngtest: FIPS 140-2 successes: 81436
rngtest: FIPS 140-2 failures: 76
rngtest: FIPS 140-2(2001-10-10) Monobit: 10
rngtest: FIPS 140-2(2001-10-10) Poker: 6
rngtest: FIPS 140-2(2001-10-10) Runs: 26
rngtest: FIPS 140-2(2001-10-10) Long run: 34
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
rngtest: Program run time: 30000987 microseconds
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 8fcdd12f684a..19ef6a467d63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -197,6 +197,19 @@
};
};
+ apb_efuse: bus@30000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x30000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
+
+ hwrng: rng {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x218 0x0 0x4>;
+ };
+ };
+
periphs: bus@34400 {
compatible = "simple-bus";
reg = <0x0 0x34400 0x0 0x400>;
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-20 13:48 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-20 13:48 [PATCH 0/3] arm64: dts: meson: g12a: add drive strength and hwrng Neil Armstrong
2019-05-20 13:48 ` Neil Armstrong
2019-05-20 13:48 ` Neil Armstrong
2019-05-20 13:48 ` [PATCH 1/3] arm64: dts: meson: g12a: add drive-strength hdmi ddc pins Neil Armstrong
2019-05-20 13:48 ` Neil Armstrong
2019-05-20 13:48 ` Neil Armstrong
2019-05-20 17:51 ` Martin Blumenstingl
2019-05-20 17:51 ` Martin Blumenstingl
2019-05-20 17:51 ` Martin Blumenstingl
2019-05-23 16:13 ` Kevin Hilman
2019-05-23 16:13 ` Kevin Hilman
2019-05-23 16:13 ` Kevin Hilman
2019-05-20 13:48 ` [PATCH 2/3] arm64: dts: meson: g12a: add drive strength for eth pins Neil Armstrong
2019-05-20 13:48 ` Neil Armstrong
2019-05-20 13:48 ` Neil Armstrong
2019-05-20 17:52 ` Martin Blumenstingl
2019-05-20 17:52 ` Martin Blumenstingl
2019-05-20 17:52 ` Martin Blumenstingl
2019-05-23 16:13 ` Kevin Hilman
2019-05-23 16:13 ` Kevin Hilman
2019-05-23 16:13 ` Kevin Hilman
2019-05-20 13:48 ` Neil Armstrong [this message]
2019-05-20 13:48 ` [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node Neil Armstrong
2019-05-20 13:48 ` Neil Armstrong
2019-05-20 17:45 ` Martin Blumenstingl
2019-05-20 17:45 ` Martin Blumenstingl
2019-05-20 17:45 ` Martin Blumenstingl
2019-05-21 8:31 ` Neil Armstrong
2019-05-21 8:31 ` Neil Armstrong
2019-05-21 8:31 ` Neil Armstrong
2019-05-23 16:13 ` Kevin Hilman
2019-05-23 16:13 ` Kevin Hilman
2019-05-23 16:13 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190520134817.25435-4-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.