From: Andrey Smirnov <andrew.smirnov@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: Andrey Smirnov <andrew.smirnov@gmail.com>, Chris Healy <cphealy@gmail.com>, Shawn Guo <shawnguo@kernel.org>, Fabio Estevam <festevam@gmail.com>, Lucas Stach <l.stach@pengutronix.de>, linux-kernel@vger.kernel.org Subject: [PATCH 2/3] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Date: Wed, 22 May 2019 00:12:26 -0700 [thread overview] Message-ID: <20190522071227.31488-2-andrew.smirnov@gmail.com> (raw) In-Reply-To: <20190522071227.31488-1-andrew.smirnov@gmail.com> RDU2 production units come with resistor connecting WP pin to correpsonding GPIO DNPed for both SD card slots. Drop any WP related configuration and mark both slots with "disable-wp". Reported-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 977d923e35df..5484e4b87975 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -625,7 +625,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -638,7 +638,7 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -1054,7 +1054,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 >; }; @@ -1067,7 +1066,6 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 >; -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Andrey Smirnov <andrew.smirnov@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: Andrey Smirnov <andrew.smirnov@gmail.com>, Shawn Guo <shawnguo@kernel.org>, linux-kernel@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, Chris Healy <cphealy@gmail.com>, Lucas Stach <l.stach@pengutronix.de> Subject: [PATCH 2/3] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Date: Wed, 22 May 2019 00:12:26 -0700 [thread overview] Message-ID: <20190522071227.31488-2-andrew.smirnov@gmail.com> (raw) In-Reply-To: <20190522071227.31488-1-andrew.smirnov@gmail.com> RDU2 production units come with resistor connecting WP pin to correpsonding GPIO DNPed for both SD card slots. Drop any WP related configuration and mark both slots with "disable-wp". Reported-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 977d923e35df..5484e4b87975 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -625,7 +625,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -638,7 +638,7 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -1054,7 +1054,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 >; }; @@ -1067,7 +1066,6 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 >; -- 2.21.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-22 7:12 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-22 7:12 [PATCH 1/3] ARM: dts: imx6: rdu2: Add node for UCS1002 USB charger chip Andrey Smirnov 2019-05-22 7:12 ` Andrey Smirnov 2019-05-22 7:12 ` Andrey Smirnov [this message] 2019-05-22 7:12 ` [PATCH 2/3] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Andrey Smirnov 2019-05-23 0:27 ` Chris Healy 2019-05-23 0:27 ` Chris Healy 2019-05-22 7:12 ` [PATCH 3/3] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Andrey Smirnov 2019-05-22 7:12 ` Andrey Smirnov 2019-05-22 9:33 ` Lucas Stach 2019-05-22 9:33 ` Lucas Stach 2019-05-22 17:56 ` Andrey Smirnov 2019-05-22 17:56 ` Andrey Smirnov 2019-05-22 18:10 ` Chris Healy 2019-05-22 18:10 ` Chris Healy 2019-05-22 9:37 ` [PATCH 1/3] ARM: dts: imx6: rdu2: Add node for UCS1002 USB charger chip Lucas Stach 2019-05-22 9:37 ` Lucas Stach 2019-05-22 17:49 ` Andrey Smirnov 2019-05-22 17:49 ` Andrey Smirnov 2019-05-29 7:18 Andrey Smirnov 2019-05-29 7:18 ` [PATCH 2/3] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Andrey Smirnov 2019-05-29 7:18 ` Andrey Smirnov 2019-05-29 8:27 ` Lucas Stach 2019-05-29 8:27 ` Lucas Stach
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190522071227.31488-2-andrew.smirnov@gmail.com \ --to=andrew.smirnov@gmail.com \ --cc=cphealy@gmail.com \ --cc=festevam@gmail.com \ --cc=l.stach@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.