All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
To: <qemu-devel@nongnu.org>, <qemu-arm@nongnu.org>,
	<eric.auger@redhat.com>, <imammedo@redhat.com>
Cc: peter.maydell@linaro.org, sameo@linux.intel.com,
	ard.biesheuvel@linaro.org, linuxarm@huawei.com,
	xuwei5@hisilicon.com, shannon.zhaosl@gmail.com,
	sebastien.boeuf@intel.com, lersek@redhat.com
Subject: [Qemu-devel] [PATCH v5 1/8] hw/acpi: Make ACPI IO address space configurable
Date: Wed, 22 May 2019 17:22:45 +0100	[thread overview]
Message-ID: <20190522162252.28568-2-shameerali.kolothum.thodi@huawei.com> (raw)
In-Reply-To: <20190522162252.28568-1-shameerali.kolothum.thodi@huawei.com>

This is in preparation for adding support for ARM64 platforms
where it doesn't use port mapped IO for ACPI IO space.

Also move few MEMORY_* definitions to header so that other memory
hotplug event signalling mechanisms (eg. Generic Event Device on
HW-reduced acpi platforms) can use the same from their respective
event handler code.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
---
 hw/acpi/memory_hotplug.c         | 25 ++++++++++++++-----------
 hw/i386/acpi-build.c             |  3 ++-
 include/hw/acpi/memory_hotplug.h |  9 +++++++--
 3 files changed, 23 insertions(+), 14 deletions(-)

diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 297812d5f7..c724f5f1e4 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -29,12 +29,9 @@
 #define MEMORY_SLOT_PROXIMITY_METHOD "MPXM"
 #define MEMORY_SLOT_EJECT_METHOD     "MEJ0"
 #define MEMORY_SLOT_NOTIFY_METHOD    "MTFY"
-#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
 #define MEMORY_HOTPLUG_DEVICE        "MHPD"
-#define MEMORY_HOTPLUG_IO_LEN         24
-#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
 
-static uint16_t memhp_io_base;
+static hwaddr memhp_io_base;
 
 static ACPIOSTInfo *acpi_memory_device_status(int slot, MemStatus *mdev)
 {
@@ -209,7 +206,7 @@ static const MemoryRegionOps acpi_memory_hotplug_ops = {
 };
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base)
+                              MemHotplugState *state, hwaddr io_base)
 {
     MachineState *machine = MACHINE(qdev_get_machine());
 
@@ -342,7 +339,8 @@ const VMStateDescription vmstate_memory_hotplug = {
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method)
+                              const char *event_handler_method,
+                              AmlRegionSpace rs)
 {
     int i;
     Aml *ifctx;
@@ -365,14 +363,19 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
             aml_name_decl("_UID", aml_string("Memory hotplug resources")));
 
         crs = aml_resource_template();
-        aml_append(crs,
-            aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
-                   MEMORY_HOTPLUG_IO_LEN)
-        );
+        if (rs == AML_SYSTEM_IO) {
+            aml_append(crs,
+                aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
+                       MEMORY_HOTPLUG_IO_LEN)
+            );
+        } else {
+            aml_append(crs, aml_memory32_fixed(memhp_io_base,
+                            MEMORY_HOTPLUG_IO_LEN, AML_READ_WRITE));
+        }
         aml_append(mem_ctrl_dev, aml_name_decl("_CRS", crs));
 
         aml_append(mem_ctrl_dev, aml_operation_region(
-            MEMORY_HOTPLUG_IO_REGION, AML_SYSTEM_IO,
+            MEMORY_HOTPLUG_IO_REGION, rs,
             aml_int(memhp_io_base), MEMORY_HOTPLUG_IO_LEN)
         );
 
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index b4ec14e349..fe263fd558 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1864,7 +1864,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
         build_cpus_aml(dsdt, machine, opts, pm->cpu_hp_io_base,
                        "\\_SB.PCI0", "\\_GPE._E02");
     }
-    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0", "\\_GPE._E03");
+    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0",
+                             "\\_GPE._E03", AML_SYSTEM_IO);
 
     scope =  aml_scope("_GPE");
     {
diff --git a/include/hw/acpi/memory_hotplug.h b/include/hw/acpi/memory_hotplug.h
index 77c65765d6..e3a4b89235 100644
--- a/include/hw/acpi/memory_hotplug.h
+++ b/include/hw/acpi/memory_hotplug.h
@@ -5,6 +5,10 @@
 #include "hw/acpi/acpi.h"
 #include "hw/acpi/aml-build.h"
 
+#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
+#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
+#define MEMORY_HOTPLUG_IO_LEN         24
+
 /**
  * MemStatus:
  * @is_removing: the memory device in slot has been requested to be ejected.
@@ -29,7 +33,7 @@ typedef struct MemHotplugState {
 } MemHotplugState;
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base);
+                              MemHotplugState *state, hwaddr io_base);
 
 void acpi_memory_plug_cb(HotplugHandler *hotplug_dev, MemHotplugState *mem_st,
                          DeviceState *dev, Error **errp);
@@ -48,5 +52,6 @@ void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method);
+                              const char *event_handler_method,
+                              AmlRegionSpace rs);
 #endif
-- 
2.17.1




  reply	other threads:[~2019-05-22 16:26 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22 16:22 [Qemu-devel] [PATCH v5 0/8] ARM virt: ACPI memory hotplug support Shameer Kolothum
2019-05-22 16:22 ` Shameer Kolothum [this message]
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 2/8] hw/acpi: Do not create memory hotplug method when handler is not defined Shameer Kolothum
2019-06-20 12:45   ` Igor Mammedov
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 3/8] hw/acpi: Add ACPI Generic Event Device Support Shameer Kolothum
2019-06-18 12:40   ` Auger Eric
2019-06-19  8:14     ` Shameerali Kolothum Thodi
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 4/8] hw/arm/virt: Add memory hotplug framework Shameer Kolothum
2019-06-18 12:42   ` Auger Eric
2019-06-19  8:16     ` Shameerali Kolothum Thodi
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 5/8] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Shameer Kolothum
2019-06-18 12:43   ` Auger Eric
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 6/8] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT Shameer Kolothum
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 7/8] hw/acpi: Add system power down support to GED Shameer Kolothum
2019-06-18 12:43   ` Auger Eric
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 8/8] hw/arm: Use GED for system_powerdown event Shameer Kolothum
2019-06-18 12:49   ` Auger Eric
2019-06-18 12:52 ` [Qemu-devel] [PATCH v5 0/8] ARM virt: ACPI memory hotplug support Auger Eric
2019-06-18 12:57   ` Peter Maydell
2019-06-18 13:44     ` Auger Eric
2019-06-19  8:18       ` Shameerali Kolothum Thodi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190522162252.28568-2-shameerali.kolothum.thodi@huawei.com \
    --to=shameerali.kolothum.thodi@huawei.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=eric.auger@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=lersek@redhat.com \
    --cc=linuxarm@huawei.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sameo@linux.intel.com \
    --cc=sebastien.boeuf@intel.com \
    --cc=shannon.zhaosl@gmail.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.