All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeremy Linton <jeremy.linton@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-acpi@vger.kernel.org, catalin.marinas@arm.com,
	will.deacon@arm.com, rjw@rjwysocki.net, lenb@kernel.org,
	sudeep.holla@arm.com, Jeremy Linton <jeremy.linton@arm.com>
Subject: [PATCH 1/2] ACPI/PPTT: Add support for ACPI 6.3 thread flag
Date: Thu, 23 May 2019 17:40:14 -0500	[thread overview]
Message-ID: <20190523224015.56270-2-jeremy.linton@arm.com> (raw)
In-Reply-To: <20190523224015.56270-1-jeremy.linton@arm.com>

ACPI 6.3 adds a flag to the CPU node to indicate whether
the given PE is a thread. Add a function to return that
information for a given linux logical CPU.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/acpi/pptt.c  | 53 +++++++++++++++++++++++++++++++++++++++++++-
 include/linux/acpi.h |  5 +++++
 2 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index b72e6afaa8fb..6f43a0c05f61 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -517,6 +517,43 @@ static int find_acpi_cpu_topology_tag(unsigned int cpu, int level, int flag)
 	return retval;
 }
 
+/**
+ * check_acpi_cpu_flag() - Determine if CPU node has a flag set
+ * @cpu: Kernel logical CPU number
+ * @rev: The PPTT revision defining the flag
+ * @flag: The flag itself
+ *
+ * Check the node representing a CPU for a given flag.
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, the CPU cannot be found or
+ *	   the table revision isn't new enough.
+ * Otherwise returns flag value
+ */
+static int check_acpi_cpu_flag(unsigned int cpu, int rev, u32 flag)
+{
+	struct acpi_table_header *table;
+	acpi_status status;
+	u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
+	struct acpi_pptt_processor *cpu_node = NULL;
+	int ret = -ENONET;
+
+	status = acpi_get_table(ACPI_SIG_PPTT, 0, &table);
+	if (ACPI_FAILURE(status)) {
+		acpi_pptt_warn_missing();
+		return ret;
+	}
+
+	if (table->revision >= rev)
+		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
+
+	if (cpu_node)
+		ret = cpu_node->flags & flag;
+
+	acpi_put_table(table);
+
+	return ret;
+}
+
 /**
  * acpi_find_last_cache_level() - Determines the number of cache levels for a PE
  * @cpu: Kernel logical CPU number
@@ -581,6 +618,21 @@ int cache_setup_acpi(unsigned int cpu)
 	return status;
 }
 
+/**
+ * acpi_pptt_cpu_is_thread() - Determine if logical CPU is a thread
+ * @cpu: Kernel logical CPU number
+ *
+ *
+ * Return: 1, a thread
+ *         0, not a thread
+ *         -ENOENT if the PPTT doesn't exist, the CPU cannot be found or
+ *         the table revision isn't new enough.
+ */
+int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+	return check_acpi_cpu_flag(cpu, 2, ACPI_PPTT_ACPI_PROCESSOR_IS_THREAD);
+}
+
 /**
  * find_acpi_cpu_topology() - Determine a unique topology value for a given CPU
  * @cpu: Kernel logical CPU number
@@ -641,7 +693,6 @@ int find_acpi_cpu_cache_topology(unsigned int cpu, int level)
 	return ret;
 }
 
-
 /**
  * find_acpi_cpu_topology_package() - Determine a unique CPU package value
  * @cpu: Kernel logical CPU number
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 98440df7fe42..513833233c65 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1314,10 +1314,15 @@ static inline int lpit_read_residency_count_address(u64 *address)
 #endif
 
 #ifdef CONFIG_ACPI_PPTT
+int acpi_pptt_cpu_is_thread(unsigned int cpu);
 int find_acpi_cpu_topology(unsigned int cpu, int level);
 int find_acpi_cpu_topology_package(unsigned int cpu);
 int find_acpi_cpu_cache_topology(unsigned int cpu, int level);
 #else
+static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+	return -EINVAL;
+}
 static inline int find_acpi_cpu_topology(unsigned int cpu, int level)
 {
 	return -EINVAL;
-- 
2.21.0


WARNING: multiple messages have this Message-ID (diff)
From: Jeremy Linton <jeremy.linton@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: catalin.marinas@arm.com, will.deacon@arm.com, rjw@rjwysocki.net,
	Jeremy Linton <jeremy.linton@arm.com>,
	linux-acpi@vger.kernel.org, sudeep.holla@arm.com,
	lenb@kernel.org
Subject: [PATCH 1/2] ACPI/PPTT: Add support for ACPI 6.3 thread flag
Date: Thu, 23 May 2019 17:40:14 -0500	[thread overview]
Message-ID: <20190523224015.56270-2-jeremy.linton@arm.com> (raw)
In-Reply-To: <20190523224015.56270-1-jeremy.linton@arm.com>

ACPI 6.3 adds a flag to the CPU node to indicate whether
the given PE is a thread. Add a function to return that
information for a given linux logical CPU.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/acpi/pptt.c  | 53 +++++++++++++++++++++++++++++++++++++++++++-
 include/linux/acpi.h |  5 +++++
 2 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index b72e6afaa8fb..6f43a0c05f61 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -517,6 +517,43 @@ static int find_acpi_cpu_topology_tag(unsigned int cpu, int level, int flag)
 	return retval;
 }
 
+/**
+ * check_acpi_cpu_flag() - Determine if CPU node has a flag set
+ * @cpu: Kernel logical CPU number
+ * @rev: The PPTT revision defining the flag
+ * @flag: The flag itself
+ *
+ * Check the node representing a CPU for a given flag.
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, the CPU cannot be found or
+ *	   the table revision isn't new enough.
+ * Otherwise returns flag value
+ */
+static int check_acpi_cpu_flag(unsigned int cpu, int rev, u32 flag)
+{
+	struct acpi_table_header *table;
+	acpi_status status;
+	u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
+	struct acpi_pptt_processor *cpu_node = NULL;
+	int ret = -ENONET;
+
+	status = acpi_get_table(ACPI_SIG_PPTT, 0, &table);
+	if (ACPI_FAILURE(status)) {
+		acpi_pptt_warn_missing();
+		return ret;
+	}
+
+	if (table->revision >= rev)
+		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
+
+	if (cpu_node)
+		ret = cpu_node->flags & flag;
+
+	acpi_put_table(table);
+
+	return ret;
+}
+
 /**
  * acpi_find_last_cache_level() - Determines the number of cache levels for a PE
  * @cpu: Kernel logical CPU number
@@ -581,6 +618,21 @@ int cache_setup_acpi(unsigned int cpu)
 	return status;
 }
 
+/**
+ * acpi_pptt_cpu_is_thread() - Determine if logical CPU is a thread
+ * @cpu: Kernel logical CPU number
+ *
+ *
+ * Return: 1, a thread
+ *         0, not a thread
+ *         -ENOENT if the PPTT doesn't exist, the CPU cannot be found or
+ *         the table revision isn't new enough.
+ */
+int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+	return check_acpi_cpu_flag(cpu, 2, ACPI_PPTT_ACPI_PROCESSOR_IS_THREAD);
+}
+
 /**
  * find_acpi_cpu_topology() - Determine a unique topology value for a given CPU
  * @cpu: Kernel logical CPU number
@@ -641,7 +693,6 @@ int find_acpi_cpu_cache_topology(unsigned int cpu, int level)
 	return ret;
 }
 
-
 /**
  * find_acpi_cpu_topology_package() - Determine a unique CPU package value
  * @cpu: Kernel logical CPU number
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 98440df7fe42..513833233c65 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1314,10 +1314,15 @@ static inline int lpit_read_residency_count_address(u64 *address)
 #endif
 
 #ifdef CONFIG_ACPI_PPTT
+int acpi_pptt_cpu_is_thread(unsigned int cpu);
 int find_acpi_cpu_topology(unsigned int cpu, int level);
 int find_acpi_cpu_topology_package(unsigned int cpu);
 int find_acpi_cpu_cache_topology(unsigned int cpu, int level);
 #else
+static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+	return -EINVAL;
+}
 static inline int find_acpi_cpu_topology(unsigned int cpu, int level)
 {
 	return -EINVAL;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-05-23 22:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-23 22:40 [PATCH 0/2] arm64/PPTT ACPI 6.3 thread flag support Jeremy Linton
2019-05-23 22:40 ` Jeremy Linton
2019-05-23 22:40 ` Jeremy Linton [this message]
2019-05-23 22:40   ` [PATCH 1/2] ACPI/PPTT: Add support for ACPI 6.3 thread flag Jeremy Linton
2019-06-07 10:03   ` Sudeep Holla
2019-06-07 10:03     ` Sudeep Holla
2019-05-23 22:40 ` [PATCH 2/2] arm64: topology: Use PPTT to determine if PE is a thread Jeremy Linton
2019-05-23 22:40   ` Jeremy Linton
2019-06-06  8:49   ` John Garry
2019-06-06  8:49     ` John Garry
2019-06-07 19:21     ` Jeremy Linton
2019-06-07 19:21       ` Jeremy Linton
2019-06-10  8:30       ` John Garry
2019-06-10  8:30         ` John Garry
2019-06-11 19:02         ` Jeremy Linton
2019-06-11 19:02           ` Jeremy Linton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190523224015.56270-2-jeremy.linton@arm.com \
    --to=jeremy.linton@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=rjw@rjwysocki.net \
    --cc=sudeep.holla@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.