All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Clément Péron" <peron.clem@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Jagan Teki <jagan@amarulasolutions.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	"Clément Péron" <peron.clem@gmail.com>
Subject: [PATCH v4 5/7] arm64: dts: allwinner: Add SPDIF node for Allwinner H6
Date: Mon, 27 May 2019 22:06:25 +0200	[thread overview]
Message-ID: <20190527200627.8635-6-peron.clem@gmail.com> (raw)
In-Reply-To: <20190527200627.8635-1-peron.clem@gmail.com>

The Allwinner H6 has a SPDIF controller called OWA (One Wire Audio).

Only one pinmuxing is available so set it as default.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index f4ea596c82ce..e0ca23704719 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -83,6 +83,24 @@
 		method = "smc";
 	};
 
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -273,6 +291,11 @@
 				bias-pull-up;
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -402,6 +425,21 @@
 			};
 		};
 
+		spdif: spdif@5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
 		usb2otg: usb@5100000 {
 			compatible = "allwinner,sun50i-h6-musb",
 				     "allwinner,sun8i-a33-musb";
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: "Clément Péron" <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
	Takashi Iwai <tiwai-IBi9RG/b67k@public.gmane.org>,
	Jagan Teki
	<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	"Clément Péron"
	<peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v4 5/7] arm64: dts: allwinner: Add SPDIF node for Allwinner H6
Date: Mon, 27 May 2019 22:06:25 +0200	[thread overview]
Message-ID: <20190527200627.8635-6-peron.clem@gmail.com> (raw)
In-Reply-To: <20190527200627.8635-1-peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The Allwinner H6 has a SPDIF controller called OWA (One Wire Audio).

Only one pinmuxing is available so set it as default.

Signed-off-by: Clément Péron <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index f4ea596c82ce..e0ca23704719 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -83,6 +83,24 @@
 		method = "smc";
 	};
 
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -273,6 +291,11 @@
 				bias-pull-up;
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -402,6 +425,21 @@
 			};
 		};
 
+		spdif: spdif@5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
 		usb2otg: usb@5100000 {
 			compatible = "allwinner,sun50i-h6-musb",
 				     "allwinner,sun8i-a33-musb";
-- 
2.20.1

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190527200627.8635-6-peron.clem%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

WARNING: multiple messages have this Message-ID (diff)
From: "Clément Péron" <peron.clem@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Jagan Teki <jagan@amarulasolutions.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	"Clément Péron" <peron.clem@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/7] arm64: dts: allwinner: Add SPDIF node for Allwinner H6
Date: Mon, 27 May 2019 22:06:25 +0200	[thread overview]
Message-ID: <20190527200627.8635-6-peron.clem@gmail.com> (raw)
In-Reply-To: <20190527200627.8635-1-peron.clem@gmail.com>

The Allwinner H6 has a SPDIF controller called OWA (One Wire Audio).

Only one pinmuxing is available so set it as default.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index f4ea596c82ce..e0ca23704719 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -83,6 +83,24 @@
 		method = "smc";
 	};
 
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -273,6 +291,11 @@
 				bias-pull-up;
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -402,6 +425,21 @@
 			};
 		};
 
+		spdif: spdif@5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
 		usb2otg: usb@5100000 {
 			compatible = "allwinner,sun50i-h6-musb",
 				     "allwinner,sun8i-a33-musb";
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-05-27 20:10 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-27 20:06 [PATCH v4 0/7] Allwinner H6 SPDIF support Clément Péron
2019-05-27 20:06 ` Clément Péron
2019-05-27 20:06 ` Clément Péron
2019-05-27 20:06 ` [PATCH v4 1/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06 ` [PATCH v4 2/7] ASoC: sun4i-spdif: Move quirks to the top Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06 ` [PATCH v4 3/7] ASoC: sun4i-spdif: Add TX fifo bit flush quirks Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-28  9:12   ` Maxime Ripard
2019-05-28  9:12     ` Maxime Ripard
2019-05-28  9:12     ` Maxime Ripard
2019-05-27 20:06 ` [PATCH v4 4/7] ASoC: sun4i-spdif: Add support for H6 SoC Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-28  9:13   ` Maxime Ripard
2019-05-28  9:13     ` Maxime Ripard
2019-05-28  9:13     ` Maxime Ripard
2019-05-27 20:06 ` Clément Péron [this message]
2019-05-27 20:06   ` [PATCH v4 5/7] arm64: dts: allwinner: Add SPDIF node for Allwinner H6 Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06 ` [PATCH v4 6/7] arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1 Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06 ` [PATCH v4 7/7] arm64: defconfig: Enable Sun4i SPDIF module Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-05-27 20:06   ` Clément Péron
2019-06-14  8:29 ` [PATCH v4 0/7] Allwinner H6 SPDIF support Clément Péron
2019-06-14  8:29   ` Clément Péron
2019-07-15 19:21   ` Clément Péron
2019-07-15 19:21     ` Clément Péron
2019-07-15 19:38     ` Mark Brown
2019-07-15 19:38       ` Mark Brown
2019-07-15 19:38       ` Mark Brown
2019-08-10  8:45       ` Clément Péron
2019-08-10  8:45         ` Clément Péron
2019-08-12 11:01         ` Mark Brown
2019-08-12 11:01           ` Mark Brown
2019-08-12 11:01           ` Mark Brown
2019-08-12 12:10           ` Clément Péron
2019-08-12 12:10             ` Clément Péron
2019-08-12 12:10             ` Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190527200627.8635-6-peron.clem@gmail.com \
    --to=peron.clem@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jagan@amarulasolutions.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.