All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leonro@mellanox.com>,
	Doug Ledford <dledford@redhat.com>,
	linux-rdma@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
	Laurence Oberman <loberman@redhat.com>,
	stable@vger.kernel.org
Subject: [PATCH, RESEND] RDMA/srp: Accept again source addresses that do not have a port number
Date: Wed, 29 May 2019 09:38:31 -0700	[thread overview]
Message-ID: <20190529163831.138926-1-bvanassche@acm.org> (raw)

The function srp_parse_in() is used both for parsing source address
specifications and for target address specifications. Target addresses
must have a port number. Having to specify a port number for source
addresses is inconvenient. Make sure that srp_parse_in() supports again
parsing addresses with no port number.

Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: c62adb7def71 ("IB/srp: Fix IPv6 address parsing") # v4.17.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/infiniband/ulp/srp/ib_srp.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index be9ddcad8f28..87848faa7502 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -3481,13 +3481,14 @@ static const match_table_t srp_opt_tokens = {
  * @net:	   [in]  Network namespace.
  * @sa:		   [out] Address family, IP address and port number.
  * @addr_port_str: [in]  IP address and port number.
+ * @has_port:	   [out] Whether or not @addr_port_str includes a port number.
  *
  * Parse the following address formats:
  * - IPv4: <ip_address>:<port>, e.g. 1.2.3.4:5.
  * - IPv6: \[<ipv6_address>\]:<port>, e.g. [1::2:3%4]:5.
  */
 static int srp_parse_in(struct net *net, struct sockaddr_storage *sa,
-			const char *addr_port_str)
+			const char *addr_port_str, bool *has_port)
 {
 	char *addr_end, *addr = kstrdup(addr_port_str, GFP_KERNEL);
 	char *port_str;
@@ -3496,9 +3497,12 @@ static int srp_parse_in(struct net *net, struct sockaddr_storage *sa,
 	if (!addr)
 		return -ENOMEM;
 	port_str = strrchr(addr, ':');
-	if (!port_str)
-		return -EINVAL;
-	*port_str++ = '\0';
+	if (port_str && strchr(port_str, ']'))
+		port_str = NULL;
+	if (port_str)
+		*port_str++ = '\0';
+	if (has_port)
+		*has_port = port_str != NULL;
 	ret = inet_pton_with_scope(net, AF_INET, addr, port_str, sa);
 	if (ret && addr[0]) {
 		addr_end = addr + strlen(addr) - 1;
@@ -3520,6 +3524,7 @@ static int srp_parse_options(struct net *net, const char *buf,
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	unsigned long long ull;
+	bool has_port;
 	int opt_mask = 0;
 	int token;
 	int ret = -EINVAL;
@@ -3618,7 +3623,8 @@ static int srp_parse_options(struct net *net, const char *buf,
 				ret = -ENOMEM;
 				goto out;
 			}
-			ret = srp_parse_in(net, &target->rdma_cm.src.ss, p);
+			ret = srp_parse_in(net, &target->rdma_cm.src.ss, p,
+					   NULL);
 			if (ret < 0) {
 				pr_warn("bad source parameter '%s'\n", p);
 				kfree(p);
@@ -3634,7 +3640,10 @@ static int srp_parse_options(struct net *net, const char *buf,
 				ret = -ENOMEM;
 				goto out;
 			}
-			ret = srp_parse_in(net, &target->rdma_cm.dst.ss, p);
+			ret = srp_parse_in(net, &target->rdma_cm.dst.ss, p,
+					   &has_port);
+			if (!has_port)
+				ret = -EINVAL;
 			if (ret < 0) {
 				pr_warn("bad dest parameter '%s'\n", p);
 				kfree(p);
-- 
2.22.0.rc1

             reply	other threads:[~2019-05-29 16:38 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-29 16:38 Bart Van Assche [this message]
2019-05-30 18:44 ` [PATCH, RESEND] RDMA/srp: Accept again source addresses that do not have a port number Jason Gunthorpe
2019-05-31 19:33   ` Bart Van Assche
2019-06-07 16:53 ` Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190529163831.138926-1-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=dledford@redhat.com \
    --cc=jgg@ziepe.ca \
    --cc=leonro@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=loberman@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.