All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guillaume La Roque <glaroque@baylibre.com>
To: jic23@kernel.org, khilman@baylibre.com
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] Documentation: dt-bindings: add the Amlogic Meson Temperature Sensor
Date: Tue,  4 Jun 2019 16:47:12 +0200	[thread overview]
Message-ID: <20190604144714.2009-2-glaroque@baylibre.com> (raw)
In-Reply-To: <20190604144714.2009-1-glaroque@baylibre.com>

This adds the devicetree binding documentation for the Temperature
Sensor found in the Amlogic Meson G12 SoCs.
Currently only the G12A SoCs are supported.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 .../iio/temperature/amlogic,meson-tsensor.txt | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt

diff --git a/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt b/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt
new file mode 100644
index 000000000000..d064db0e9cac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt
@@ -0,0 +1,31 @@
+* Amlogic Meson Temperature Sensor
+
+Required properties:
+- compatible:	depending on the SoC and the position of the sensor,
+		this should be one of:
+		- "amlogic,meson-g12a-cpu-tsensor" for the CPU G12A SoC sensor
+		- "amlogic,meson-g12a-ddr-tsensor" for the DDR G12A SoC sensor
+		followed by the common :
+		- "amlogic,meson-g12a-tsensor" for G12A SoC family
+- reg:		the physical base address and length of the registers
+- interrupts:	the interrupt indicating end of sampling
+- clocks:	phandle identifier for the reference clock of temperature sensor
+- #io-channel-cells: must be 1, see ../iio-bindings.txt
+- amlogic,ao-secure: phandle to the ao-secure syscon
+
+Optional properties:
+- amlogic,critical-temperature: temperature value in milli degrees Celsius
+	to set automatic reboot on too high temperature
+
+Example:
+	cpu_temp: temperature-sensor@ff634800 {
+		compatible = "amlogic,meson-g12a-cpu-tsensor",
+			     "amlogic,meson-g12a-tsensor";
+		reg = <0x0 0xff634800 0x0 0x50>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_TS>;
+		status = "okay";
+		#io-channel-cells = <1>;
+		amlogic,meson-ao-secure = <&sec_AO>;
+		amlogic,critical-temperature = <115000>;
+	};
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Guillaume La Roque <glaroque@baylibre.com>
To: jic23@kernel.org, khilman@baylibre.com
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: [PATCH 1/3] Documentation: dt-bindings: add the Amlogic Meson Temperature Sensor
Date: Tue,  4 Jun 2019 16:47:12 +0200	[thread overview]
Message-ID: <20190604144714.2009-2-glaroque@baylibre.com> (raw)
In-Reply-To: <20190604144714.2009-1-glaroque@baylibre.com>

This adds the devicetree binding documentation for the Temperature
Sensor found in the Amlogic Meson G12 SoCs.
Currently only the G12A SoCs are supported.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 .../iio/temperature/amlogic,meson-tsensor.txt | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt

diff --git a/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt b/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt
new file mode 100644
index 000000000000..d064db0e9cac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt
@@ -0,0 +1,31 @@
+* Amlogic Meson Temperature Sensor
+
+Required properties:
+- compatible:	depending on the SoC and the position of the sensor,
+		this should be one of:
+		- "amlogic,meson-g12a-cpu-tsensor" for the CPU G12A SoC sensor
+		- "amlogic,meson-g12a-ddr-tsensor" for the DDR G12A SoC sensor
+		followed by the common :
+		- "amlogic,meson-g12a-tsensor" for G12A SoC family
+- reg:		the physical base address and length of the registers
+- interrupts:	the interrupt indicating end of sampling
+- clocks:	phandle identifier for the reference clock of temperature sensor
+- #io-channel-cells: must be 1, see ../iio-bindings.txt
+- amlogic,ao-secure: phandle to the ao-secure syscon
+
+Optional properties:
+- amlogic,critical-temperature: temperature value in milli degrees Celsius
+	to set automatic reboot on too high temperature
+
+Example:
+	cpu_temp: temperature-sensor@ff634800 {
+		compatible = "amlogic,meson-g12a-cpu-tsensor",
+			     "amlogic,meson-g12a-tsensor";
+		reg = <0x0 0xff634800 0x0 0x50>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_TS>;
+		status = "okay";
+		#io-channel-cells = <1>;
+		amlogic,meson-ao-secure = <&sec_AO>;
+		amlogic,critical-temperature = <115000>;
+	};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Guillaume La Roque <glaroque@baylibre.com>
To: jic23@kernel.org, khilman@baylibre.com
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: [PATCH 1/3] Documentation: dt-bindings: add the Amlogic Meson Temperature Sensor
Date: Tue,  4 Jun 2019 16:47:12 +0200	[thread overview]
Message-ID: <20190604144714.2009-2-glaroque@baylibre.com> (raw)
In-Reply-To: <20190604144714.2009-1-glaroque@baylibre.com>

This adds the devicetree binding documentation for the Temperature
Sensor found in the Amlogic Meson G12 SoCs.
Currently only the G12A SoCs are supported.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 .../iio/temperature/amlogic,meson-tsensor.txt | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt

diff --git a/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt b/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt
new file mode 100644
index 000000000000..d064db0e9cac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/amlogic,meson-tsensor.txt
@@ -0,0 +1,31 @@
+* Amlogic Meson Temperature Sensor
+
+Required properties:
+- compatible:	depending on the SoC and the position of the sensor,
+		this should be one of:
+		- "amlogic,meson-g12a-cpu-tsensor" for the CPU G12A SoC sensor
+		- "amlogic,meson-g12a-ddr-tsensor" for the DDR G12A SoC sensor
+		followed by the common :
+		- "amlogic,meson-g12a-tsensor" for G12A SoC family
+- reg:		the physical base address and length of the registers
+- interrupts:	the interrupt indicating end of sampling
+- clocks:	phandle identifier for the reference clock of temperature sensor
+- #io-channel-cells: must be 1, see ../iio-bindings.txt
+- amlogic,ao-secure: phandle to the ao-secure syscon
+
+Optional properties:
+- amlogic,critical-temperature: temperature value in milli degrees Celsius
+	to set automatic reboot on too high temperature
+
+Example:
+	cpu_temp: temperature-sensor@ff634800 {
+		compatible = "amlogic,meson-g12a-cpu-tsensor",
+			     "amlogic,meson-g12a-tsensor";
+		reg = <0x0 0xff634800 0x0 0x50>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_TS>;
+		status = "okay";
+		#io-channel-cells = <1>;
+		amlogic,meson-ao-secure = <&sec_AO>;
+		amlogic,critical-temperature = <115000>;
+	};
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2019-06-04 14:47 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-04 14:47 [PATCH 0/3] Add support of New Amlogic temperature sensor for G12A SoCs Guillaume La Roque
2019-06-04 14:47 ` Guillaume La Roque
2019-06-04 14:47 ` Guillaume La Roque
2019-06-04 14:47 ` Guillaume La Roque [this message]
2019-06-04 14:47   ` [PATCH 1/3] Documentation: dt-bindings: add the Amlogic Meson Temperature Sensor Guillaume La Roque
2019-06-04 14:47   ` Guillaume La Roque
2019-06-06 19:16   ` Martin Blumenstingl
2019-06-06 19:16     ` Martin Blumenstingl
2019-06-06 19:16     ` Martin Blumenstingl
2019-06-08 13:10     ` Jonathan Cameron
2019-06-08 13:10       ` Jonathan Cameron
2019-06-08 13:10       ` Jonathan Cameron
2019-06-11 11:01     ` Neil Armstrong
2019-06-11 11:01       ` Neil Armstrong
2019-06-11 11:01       ` Neil Armstrong
2019-06-11 17:57       ` Martin Blumenstingl
2019-06-11 17:57         ` Martin Blumenstingl
2019-06-11 17:57         ` Martin Blumenstingl
2019-06-08 13:08   ` Jonathan Cameron
2019-06-08 13:08     ` Jonathan Cameron
2019-06-08 13:08     ` Jonathan Cameron
2019-06-04 14:47 ` [PATCH 2/3] arm64: dts: meson: g12a: add temperature sensor node Guillaume La Roque
2019-06-04 14:47   ` Guillaume La Roque
2019-06-04 14:47   ` Guillaume La Roque
2019-06-04 14:47 ` [PATCH 3/3] iio: temperature: add a driver for the temperature sensor found in Amlogic Meson G12 SoCs Guillaume La Roque
2019-06-04 14:47   ` Guillaume La Roque
2019-06-04 14:47   ` Guillaume La Roque
2019-06-06 19:40   ` Martin Blumenstingl
2019-06-06 19:40     ` Martin Blumenstingl
2019-06-06 19:40     ` Martin Blumenstingl
2019-06-08 13:29   ` Jonathan Cameron
2019-06-08 13:29     ` Jonathan Cameron
2019-06-08 13:29     ` Jonathan Cameron
2019-06-08 13:29     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190604144714.2009-2-glaroque@baylibre.com \
    --to=glaroque@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.