All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: alokc@codeaurora.org, andy.gross@linaro.org,
	david.brown@linaro.org, wsa+renesas@sang-engineering.com,
	bjorn.andersson@linaro.org, linus.walleij@linaro.org,
	balbi@kernel.org, gregkh@linuxfoundation.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, jlhugo@gmail.com,
	linux-i2c@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-usb@vger.kernel.org,
	Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a reserved GPIO list
Date: Wed,  5 Jun 2019 12:42:57 +0100	[thread overview]
Message-ID: <20190605114302.22509-3-lee.jones@linaro.org> (raw)
In-Reply-To: <20190605114302.22509-1-lee.jones@linaro.org>

When booting MSM based platforms with Device Tree or some ACPI
implementations, it is possible to provide a list of reserved pins
via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
However some ACPI tables are not populated with this information,
thus it has to come from a knowledgable device driver instead.

Here we provide the MSM common driver with additional support to
parse this informtion and correctly populate the widely used
'valid_mask'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 18 ++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-msm.h |  1 +
 2 files changed, 19 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index ee8119879c4c..3ac740b36508 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -607,8 +607,23 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip)
 	int ret;
 	unsigned int len, i;
 	unsigned int max_gpios = pctrl->soc->ngpios;
+	const int *reserved = pctrl->soc->reserved_gpios;
 	u16 *tmp;
 
+	/* Driver provided reserved list overrides DT and ACPI */
+	if (reserved) {
+		bitmap_fill(chip->valid_mask, max_gpios);
+		for (i = 0; reserved[i] >= 0; i++) {
+			if (i >= max_gpios || reserved[i] >= max_gpios) {
+				dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
+				return -EINVAL;
+			}
+			clear_bit(reserved[i], chip->valid_mask);
+		}
+
+		return 0;
+	}
+
 	/* The number of GPIOs in the ACPI tables */
 	len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL,
 						   0);
@@ -964,6 +979,9 @@ static void msm_gpio_irq_handler(struct irq_desc *desc)
 
 static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
 {
+	if (pctrl->soc->reserved_gpios)
+		return true;
+
 	return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0;
 }
 
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index c12048e54a6f..23b93ae92269 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -121,6 +121,7 @@ struct msm_pinctrl_soc_data {
 	bool pull_no_keeper;
 	const char *const *tiles;
 	unsigned int ntiles;
+	const int *reserved_gpios;
 };
 
 extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: alokc@codeaurora.org, andy.gross@linaro.org,
	david.brown@linaro.org, wsa+renesas@sang-engineering.com,
	bjorn.andersson@linaro.org, linus.walleij@linaro.org,
	balbi@kernel.org, gregkh@linuxfoundation.org
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-i2c@vger.kernel.org, jlhugo@gmail.com,
	Lee Jones <lee.jones@linaro.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a reserved GPIO list
Date: Wed,  5 Jun 2019 12:42:57 +0100	[thread overview]
Message-ID: <20190605114302.22509-3-lee.jones@linaro.org> (raw)
In-Reply-To: <20190605114302.22509-1-lee.jones@linaro.org>

When booting MSM based platforms with Device Tree or some ACPI
implementations, it is possible to provide a list of reserved pins
via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
However some ACPI tables are not populated with this information,
thus it has to come from a knowledgable device driver instead.

Here we provide the MSM common driver with additional support to
parse this informtion and correctly populate the widely used
'valid_mask'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 18 ++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-msm.h |  1 +
 2 files changed, 19 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index ee8119879c4c..3ac740b36508 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -607,8 +607,23 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip)
 	int ret;
 	unsigned int len, i;
 	unsigned int max_gpios = pctrl->soc->ngpios;
+	const int *reserved = pctrl->soc->reserved_gpios;
 	u16 *tmp;
 
+	/* Driver provided reserved list overrides DT and ACPI */
+	if (reserved) {
+		bitmap_fill(chip->valid_mask, max_gpios);
+		for (i = 0; reserved[i] >= 0; i++) {
+			if (i >= max_gpios || reserved[i] >= max_gpios) {
+				dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
+				return -EINVAL;
+			}
+			clear_bit(reserved[i], chip->valid_mask);
+		}
+
+		return 0;
+	}
+
 	/* The number of GPIOs in the ACPI tables */
 	len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL,
 						   0);
@@ -964,6 +979,9 @@ static void msm_gpio_irq_handler(struct irq_desc *desc)
 
 static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
 {
+	if (pctrl->soc->reserved_gpios)
+		return true;
+
 	return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0;
 }
 
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index c12048e54a6f..23b93ae92269 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -121,6 +121,7 @@ struct msm_pinctrl_soc_data {
 	bool pull_no_keeper;
 	const char *const *tiles;
 	unsigned int ntiles;
+	const int *reserved_gpios;
 };
 
 extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-05 11:43 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-05 11:42 [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI Lee Jones
2019-06-05 11:42 ` Lee Jones
2019-06-05 11:42 ` Lee Jones
2019-06-05 11:42 ` [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe Lee Jones
2019-06-05 11:42   ` Lee Jones
2019-06-05 11:42   ` Lee Jones
2019-06-05 11:42 ` Lee Jones [this message]
2019-06-05 11:42   ` [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a reserved GPIO list Lee Jones
2019-06-07 23:02   ` Linus Walleij
2019-06-07 23:02     ` Linus Walleij
2019-06-08  4:10     ` Bjorn Andersson
2019-06-08  4:10       ` Bjorn Andersson
2019-06-08  4:10       ` Bjorn Andersson
2019-06-10  7:57       ` Lee Jones
2019-06-10  7:57         ` Lee Jones
2019-06-08  4:06   ` Bjorn Andersson
2019-06-08  4:06     ` Bjorn Andersson
2019-06-10  8:02     ` Lee Jones
2019-06-10  8:02       ` Lee Jones
2019-06-05 11:42 ` [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support Lee Jones
2019-06-05 11:42   ` Lee Jones
2019-06-05 11:42   ` Lee Jones
2019-06-05 11:42 ` [PATCH 5/8] soc: qcom: geni: Add support for ACPI Lee Jones
2019-06-05 11:42   ` Lee Jones
2019-06-05 11:43 ` [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI Lee Jones
2019-06-05 11:43   ` Lee Jones
2019-06-05 11:43 ` [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845 Lee Jones
2019-06-05 11:43   ` Lee Jones
2019-06-05 11:43 ` [PATCH 8/8] usb: dwc3: qcom: Improve error handling Lee Jones
2019-06-05 11:43   ` Lee Jones
  -- strict thread matches above, loose matches on Subject: below --
2019-06-04 10:44 [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI Lee Jones
2019-06-04 10:44 ` [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a reserved GPIO list Lee Jones
2019-06-04 10:44   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190605114302.22509-3-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=alokc@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jlhugo@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.