[PATCH 2/3] drm/i915/dsi: Move vlv/icl_dphy_param_init call out of intel_dsi_vbt_init (v2)

[Hans de Goede <hdegoede@redhat.com>]

The vlv/icl_dphy_param_init calls do various calculations to set dphy
parameters based on the pclk.

Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
vlv_dsi_init a chance to tweak the pclk before these calculations are done.

Changes in v2:
-Also moves the icl and vlv specific dphy_param_init functions from the
 generic intel_dsi_vbt.c file into the icl_ and vlv_dsi.c specific files.

Note icl_dphy_param_init() and vlv_dphy_param_init() are only moved,
otherwise they are completely unchanged.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/i915/icl_dsi.c       | 108 ++++++++++
 drivers/gpu/drm/i915/intel_dsi.h     |   1 +
 drivers/gpu/drm/i915/intel_dsi_vbt.c | 282 +--------------------------
 drivers/gpu/drm/i915/vlv_dsi.c       | 170 ++++++++++++++++
 4 files changed, 280 insertions(+), 281 deletions(-)

diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index 9d962ea1e635..511c76e788ef 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -1363,6 +1363,113 @@ static const struct mipi_dsi_host_ops gen11_dsi_host_ops = {
 	.transfer = gen11_dsi_host_transfer,
 };
 
+#define ICL_PREPARE_CNT_MAX	0x7
+#define ICL_CLK_ZERO_CNT_MAX	0xf
+#define ICL_TRAIL_CNT_MAX	0x7
+#define ICL_TCLK_PRE_CNT_MAX	0x3
+#define ICL_TCLK_POST_CNT_MAX	0x7
+#define ICL_HS_ZERO_CNT_MAX	0xf
+#define ICL_EXIT_ZERO_CNT_MAX	0x7
+
+static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
+{
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+	u32 tlpx_ns;
+	u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
+	u32 ths_prepare_ns, tclk_trail_ns;
+	u32 hs_zero_cnt;
+	u32 tclk_pre_cnt, tclk_post_cnt;
+
+	tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
+
+	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
+	ths_prepare_ns = max(mipi_config->ths_prepare,
+			     mipi_config->tclk_prepare);
+
+	/*
+	 * prepare cnt in escape clocks
+	 * this field represents a hexadecimal value with a precision
+	 * of 1.2 – i.e. the most significant bit is the integer
+	 * and the least significant 2 bits are fraction bits.
+	 * so, the field can represent a range of 0.25 to 1.75
+	 */
+	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
+	if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
+		DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
+		prepare_cnt = ICL_PREPARE_CNT_MAX;
+	}
+
+	/* clk zero count in escape clocks */
+	clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
+				    ths_prepare_ns, tlpx_ns);
+	if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
+		clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
+	}
+
+	/* trail cnt in escape clocks*/
+	trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
+	if (trail_cnt > ICL_TRAIL_CNT_MAX) {
+		DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
+		trail_cnt = ICL_TRAIL_CNT_MAX;
+	}
+
+	/* tclk pre count in escape clocks */
+	tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
+	if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
+		DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
+		tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
+	}
+
+	/* tclk post count in escape clocks */
+	tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
+	if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
+		DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n", tclk_post_cnt);
+		tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
+	}
+
+	/* hs zero cnt in escape clocks */
+	hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
+				   ths_prepare_ns, tlpx_ns);
+	if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
+		hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
+	}
+
+	/* hs exit zero cnt in escape clocks */
+	exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
+	if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n", exit_zero_cnt);
+		exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
+	}
+
+	/* clock lane dphy timings */
+	intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
+			       CLK_PREPARE(prepare_cnt) |
+			       CLK_ZERO_OVERRIDE |
+			       CLK_ZERO(clk_zero_cnt) |
+			       CLK_PRE_OVERRIDE |
+			       CLK_PRE(tclk_pre_cnt) |
+			       CLK_POST_OVERRIDE |
+			       CLK_POST(tclk_post_cnt) |
+			       CLK_TRAIL_OVERRIDE |
+			       CLK_TRAIL(trail_cnt));
+
+	/* data lanes dphy timings */
+	intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
+					 HS_PREPARE(prepare_cnt) |
+					 HS_ZERO_OVERRIDE |
+					 HS_ZERO(hs_zero_cnt) |
+					 HS_TRAIL_OVERRIDE |
+					 HS_TRAIL(trail_cnt) |
+					 HS_EXIT_OVERRIDE |
+					 HS_EXIT(exit_zero_cnt));
+
+	intel_dsi_log_params(intel_dsi);
+}
+
 void icl_dsi_init(struct drm_i915_private *dev_priv)
 {
 	struct drm_device *dev = &dev_priv->drm;
@@ -1455,6 +1562,7 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
 		goto err;
 	}
 
+	icl_dphy_param_init(intel_dsi);
 	return;
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 705a609050c0..2e997187fed5 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -192,5 +192,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
 void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
 				 enum mipi_seq seq_id);
 void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec);
+void intel_dsi_log_params(struct intel_dsi *intel_dsi);
 
 #endif /* _INTEL_DSI_H */
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 3a187ffabfbd..26fcb3344ebb 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -41,13 +41,6 @@
 #define MIPI_VIRTUAL_CHANNEL_SHIFT	1
 #define MIPI_PORT_SHIFT			3
 
-#define PREPARE_CNT_MAX		0x3F
-#define EXIT_ZERO_CNT_MAX	0x3F
-#define CLK_ZERO_CNT_MAX	0xFF
-#define TRAIL_CNT_MAX		0x1F
-
-#define NS_KHZ_RATIO 1000000
-
 /* base offsets for gpio pads */
 #define VLV_GPIO_NC_0_HV_DDI0_HPD	0x4130
 #define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA	0x4120
@@ -532,7 +525,7 @@ void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
 	msleep(msec);
 }
 
-static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
+void intel_dsi_log_params(struct intel_dsi *intel_dsi)
 {
 	DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
 	DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
@@ -570,274 +563,6 @@ static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
 			enableddisabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA)));
 }
 
-#define ICL_PREPARE_CNT_MAX	0x7
-#define ICL_CLK_ZERO_CNT_MAX	0xf
-#define ICL_TRAIL_CNT_MAX	0x7
-#define ICL_TCLK_PRE_CNT_MAX	0x3
-#define ICL_TCLK_POST_CNT_MAX	0x7
-#define ICL_HS_ZERO_CNT_MAX	0xf
-#define ICL_EXIT_ZERO_CNT_MAX	0x7
-
-static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
-{
-	struct drm_device *dev = intel_dsi->base.base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
-	u32 tlpx_ns;
-	u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
-	u32 ths_prepare_ns, tclk_trail_ns;
-	u32 hs_zero_cnt;
-	u32 tclk_pre_cnt, tclk_post_cnt;
-
-	tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
-
-	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
-	ths_prepare_ns = max(mipi_config->ths_prepare,
-			     mipi_config->tclk_prepare);
-
-	/*
-	 * prepare cnt in escape clocks
-	 * this field represents a hexadecimal value with a precision
-	 * of 1.2 – i.e. the most significant bit is the integer
-	 * and the least significant 2 bits are fraction bits.
-	 * so, the field can represent a range of 0.25 to 1.75
-	 */
-	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
-	if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
-		DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
-		prepare_cnt = ICL_PREPARE_CNT_MAX;
-	}
-
-	/* clk zero count in escape clocks */
-	clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
-				    ths_prepare_ns, tlpx_ns);
-	if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
-		DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
-		clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
-	}
-
-	/* trail cnt in escape clocks*/
-	trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
-	if (trail_cnt > ICL_TRAIL_CNT_MAX) {
-		DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
-		trail_cnt = ICL_TRAIL_CNT_MAX;
-	}
-
-	/* tclk pre count in escape clocks */
-	tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
-	if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
-		DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
-		tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
-	}
-
-	/* tclk post count in escape clocks */
-	tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
-	if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
-		DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n", tclk_post_cnt);
-		tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
-	}
-
-	/* hs zero cnt in escape clocks */
-	hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
-				   ths_prepare_ns, tlpx_ns);
-	if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
-		DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
-		hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
-	}
-
-	/* hs exit zero cnt in escape clocks */
-	exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
-	if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
-		DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n", exit_zero_cnt);
-		exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
-	}
-
-	/* clock lane dphy timings */
-	intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
-			       CLK_PREPARE(prepare_cnt) |
-			       CLK_ZERO_OVERRIDE |
-			       CLK_ZERO(clk_zero_cnt) |
-			       CLK_PRE_OVERRIDE |
-			       CLK_PRE(tclk_pre_cnt) |
-			       CLK_POST_OVERRIDE |
-			       CLK_POST(tclk_post_cnt) |
-			       CLK_TRAIL_OVERRIDE |
-			       CLK_TRAIL(trail_cnt));
-
-	/* data lanes dphy timings */
-	intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
-					 HS_PREPARE(prepare_cnt) |
-					 HS_ZERO_OVERRIDE |
-					 HS_ZERO(hs_zero_cnt) |
-					 HS_TRAIL_OVERRIDE |
-					 HS_TRAIL(trail_cnt) |
-					 HS_EXIT_OVERRIDE |
-					 HS_EXIT(exit_zero_cnt));
-
-	intel_dsi_log_params(intel_dsi);
-}
-
-static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
-{
-	struct drm_device *dev = intel_dsi->base.base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
-	u32 tlpx_ns, extra_byte_count, tlpx_ui;
-	u32 ui_num, ui_den;
-	u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
-	u32 ths_prepare_ns, tclk_trail_ns;
-	u32 tclk_prepare_clkzero, ths_prepare_hszero;
-	u32 lp_to_hs_switch, hs_to_lp_switch;
-	u32 mul;
-
-	tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
-
-	switch (intel_dsi->lane_count) {
-	case 1:
-	case 2:
-		extra_byte_count = 2;
-		break;
-	case 3:
-		extra_byte_count = 4;
-		break;
-	case 4:
-	default:
-		extra_byte_count = 3;
-		break;
-	}
-
-	/* in Kbps */
-	ui_num = NS_KHZ_RATIO;
-	ui_den = intel_dsi_bitrate(intel_dsi);
-
-	tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
-	ths_prepare_hszero = mipi_config->ths_prepare_hszero;
-
-	/*
-	 * B060
-	 * LP byte clock = TLPX/ (8UI)
-	 */
-	intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
-
-	/* DDR clock period = 2 * UI
-	 * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
-	 * UI(nsec) = 10^6 / bitrate
-	 * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
-	 * DDR clock count  = ns_value / DDR clock period
-	 *
-	 * For GEMINILAKE dphy_param_reg will be programmed in terms of
-	 * HS byte clock count for other platform in HS ddr clock count
-	 */
-	mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
-	ths_prepare_ns = max(mipi_config->ths_prepare,
-			     mipi_config->tclk_prepare);
-
-	/* prepare count */
-	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
-
-	if (prepare_cnt > PREPARE_CNT_MAX) {
-		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
-		prepare_cnt = PREPARE_CNT_MAX;
-	}
-
-	/* exit zero count */
-	exit_zero_cnt = DIV_ROUND_UP(
-				(ths_prepare_hszero - ths_prepare_ns) * ui_den,
-				ui_num * mul
-				);
-
-	/*
-	 * Exit zero is unified val ths_zero and ths_exit
-	 * minimum value for ths_exit = 110ns
-	 * min (exit_zero_cnt * 2) = 110/UI
-	 * exit_zero_cnt = 55/UI
-	 */
-	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
-		exit_zero_cnt += 1;
-
-	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
-		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
-		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
-	}
-
-	/* clk zero count */
-	clk_zero_cnt = DIV_ROUND_UP(
-				(tclk_prepare_clkzero -	ths_prepare_ns)
-				* ui_den, ui_num * mul);
-
-	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
-		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
-		clk_zero_cnt = CLK_ZERO_CNT_MAX;
-	}
-
-	/* trail count */
-	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
-	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
-
-	if (trail_cnt > TRAIL_CNT_MAX) {
-		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
-		trail_cnt = TRAIL_CNT_MAX;
-	}
-
-	/* B080 */
-	intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
-						clk_zero_cnt << 8 | prepare_cnt;
-
-	/*
-	 * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
-	 *					mul + 10UI + Extra Byte Count
-	 *
-	 * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
-	 * Extra Byte Count is calculated according to number of lanes.
-	 * High Low Switch Count is the Max of LP to HS and
-	 * HS to LP switch count
-	 *
-	 */
-	tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
-
-	/* B044 */
-	/* FIXME:
-	 * The comment above does not match with the code */
-	lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
-						exit_zero_cnt * mul + 10, 8);
-
-	hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
-
-	intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
-	intel_dsi->hs_to_lp_count += extra_byte_count;
-
-	/* B088 */
-	/* LP -> HS for clock lanes
-	 * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
-	 *						extra byte count
-	 * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
-	 *					2(in UI) + extra byte count
-	 * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
-	 *					8 + extra byte count
-	 */
-	intel_dsi->clk_lp_to_hs_count =
-		DIV_ROUND_UP(
-			4 * tlpx_ui + prepare_cnt * 2 +
-			clk_zero_cnt * 2,
-			8);
-
-	intel_dsi->clk_lp_to_hs_count += extra_byte_count;
-
-	/* HS->LP for Clock Lanes
-	 * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
-	 *						Extra byte count
-	 * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
-	 * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
-	 *						Extra byte count
-	 */
-	intel_dsi->clk_hs_to_lp_count =
-		DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
-			8);
-	intel_dsi->clk_hs_to_lp_count += extra_byte_count;
-
-	intel_dsi_log_params(intel_dsi);
-}
-
 bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 {
 	struct drm_device *dev = intel_dsi->base.base.dev;
@@ -925,11 +650,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 
 	intel_dsi->burst_mode_ratio = burst_mode_ratio;
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		icl_dphy_param_init(intel_dsi);
-	else
-		vlv_dphy_param_init(intel_dsi);
-
 	/* delays in VBT are in unit of 100us, so need to convert
 	 * here in ms
 	 * Delay (100us) * 100 /1000 = Delay / 10 (ms) */
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index 255996a71b91..59500c838b9d 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -1689,6 +1689,174 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
 	}
 }
 
+#define NS_KHZ_RATIO		1000000
+
+#define PREPARE_CNT_MAX		0x3F
+#define EXIT_ZERO_CNT_MAX	0x3F
+#define CLK_ZERO_CNT_MAX	0xFF
+#define TRAIL_CNT_MAX		0x1F
+
+static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
+{
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+	u32 tlpx_ns, extra_byte_count, tlpx_ui;
+	u32 ui_num, ui_den;
+	u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
+	u32 ths_prepare_ns, tclk_trail_ns;
+	u32 tclk_prepare_clkzero, ths_prepare_hszero;
+	u32 lp_to_hs_switch, hs_to_lp_switch;
+	u32 mul;
+
+	tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
+
+	switch (intel_dsi->lane_count) {
+	case 1:
+	case 2:
+		extra_byte_count = 2;
+		break;
+	case 3:
+		extra_byte_count = 4;
+		break;
+	case 4:
+	default:
+		extra_byte_count = 3;
+		break;
+	}
+
+	/* in Kbps */
+	ui_num = NS_KHZ_RATIO;
+	ui_den = intel_dsi_bitrate(intel_dsi);
+
+	tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
+	ths_prepare_hszero = mipi_config->ths_prepare_hszero;
+
+	/*
+	 * B060
+	 * LP byte clock = TLPX/ (8UI)
+	 */
+	intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
+
+	/* DDR clock period = 2 * UI
+	 * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
+	 * UI(nsec) = 10^6 / bitrate
+	 * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
+	 * DDR clock count  = ns_value / DDR clock period
+	 *
+	 * For GEMINILAKE dphy_param_reg will be programmed in terms of
+	 * HS byte clock count for other platform in HS ddr clock count
+	 */
+	mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
+	ths_prepare_ns = max(mipi_config->ths_prepare,
+			     mipi_config->tclk_prepare);
+
+	/* prepare count */
+	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
+
+	if (prepare_cnt > PREPARE_CNT_MAX) {
+		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
+		prepare_cnt = PREPARE_CNT_MAX;
+	}
+
+	/* exit zero count */
+	exit_zero_cnt = DIV_ROUND_UP(
+				(ths_prepare_hszero - ths_prepare_ns) * ui_den,
+				ui_num * mul
+				);
+
+	/*
+	 * Exit zero is unified val ths_zero and ths_exit
+	 * minimum value for ths_exit = 110ns
+	 * min (exit_zero_cnt * 2) = 110/UI
+	 * exit_zero_cnt = 55/UI
+	 */
+	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
+		exit_zero_cnt += 1;
+
+	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
+		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
+	}
+
+	/* clk zero count */
+	clk_zero_cnt = DIV_ROUND_UP(
+				(tclk_prepare_clkzero -	ths_prepare_ns)
+				* ui_den, ui_num * mul);
+
+	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
+		clk_zero_cnt = CLK_ZERO_CNT_MAX;
+	}
+
+	/* trail count */
+	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
+	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
+
+	if (trail_cnt > TRAIL_CNT_MAX) {
+		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
+		trail_cnt = TRAIL_CNT_MAX;
+	}
+
+	/* B080 */
+	intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
+						clk_zero_cnt << 8 | prepare_cnt;
+
+	/*
+	 * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
+	 *					mul + 10UI + Extra Byte Count
+	 *
+	 * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
+	 * Extra Byte Count is calculated according to number of lanes.
+	 * High Low Switch Count is the Max of LP to HS and
+	 * HS to LP switch count
+	 *
+	 */
+	tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
+
+	/* B044 */
+	/* FIXME:
+	 * The comment above does not match with the code */
+	lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
+						exit_zero_cnt * mul + 10, 8);
+
+	hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
+
+	intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
+	intel_dsi->hs_to_lp_count += extra_byte_count;
+
+	/* B088 */
+	/* LP -> HS for clock lanes
+	 * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
+	 *						extra byte count
+	 * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
+	 *					2(in UI) + extra byte count
+	 * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
+	 *					8 + extra byte count
+	 */
+	intel_dsi->clk_lp_to_hs_count =
+		DIV_ROUND_UP(
+			4 * tlpx_ui + prepare_cnt * 2 +
+			clk_zero_cnt * 2,
+			8);
+
+	intel_dsi->clk_lp_to_hs_count += extra_byte_count;
+
+	/* HS->LP for Clock Lanes
+	 * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
+	 *						Extra byte count
+	 * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
+	 * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
+	 *						Extra byte count
+	 */
+	intel_dsi->clk_hs_to_lp_count =
+		DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
+			8);
+	intel_dsi->clk_hs_to_lp_count += extra_byte_count;
+
+	intel_dsi_log_params(intel_dsi);
+}
+
 void vlv_dsi_init(struct drm_i915_private *dev_priv)
 {
 	struct drm_device *dev = &dev_priv->drm;
@@ -1778,6 +1946,8 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 		goto err;
 	}
 
+	vlv_dphy_param_init(intel_dsi);
+
 	/*
 	 * In case of BYT with CRC PMIC, we need to use GPIO for
 	 * Panel control.
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel