All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 0/2] arm64: dts: g12a/g12b: add the Ethernet PHY GPIO IRQs
Date: Mon, 10 Jun 2019 18:45:29 +0200	[thread overview]
Message-ID: <20190610164531.8303-1-martin.blumenstingl@googlemail.com> (raw)

Avoid polling of the PHY status by passing the Ethernet PHY's GPIO
interrupt line to the PHY node.

I tested this successfully on my X96 Max, but I don't have an Odroid-N2
to test it there. The reset and interrupt GPIO part of the schematics
seems to be identical for both boards (and probably other "reference
design" based boards as well).

This depends on two of my other series:
1. "irqchip/meson-gpio: Add support for Meson-G12A SoC" from [0]
2. "Ethernet PHY reset GPIO updates for Amlogic SoCs" from [1]


[0] https://patchwork.kernel.org/cover/10983339/
[1] https://patchwork.kernel.org/cover/10985155/


Martin Blumenstingl (2):
  arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt
    line
  arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line

 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts   | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++++
 2 files changed, 8 insertions(+)

-- 
2.22.0


WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] arm64: dts: g12a/g12b: add the Ethernet PHY GPIO IRQs
Date: Mon, 10 Jun 2019 18:45:29 +0200	[thread overview]
Message-ID: <20190610164531.8303-1-martin.blumenstingl@googlemail.com> (raw)

Avoid polling of the PHY status by passing the Ethernet PHY's GPIO
interrupt line to the PHY node.

I tested this successfully on my X96 Max, but I don't have an Odroid-N2
to test it there. The reset and interrupt GPIO part of the schematics
seems to be identical for both boards (and probably other "reference
design" based boards as well).

This depends on two of my other series:
1. "irqchip/meson-gpio: Add support for Meson-G12A SoC" from [0]
2. "Ethernet PHY reset GPIO updates for Amlogic SoCs" from [1]


[0] https://patchwork.kernel.org/cover/10983339/
[1] https://patchwork.kernel.org/cover/10985155/


Martin Blumenstingl (2):
  arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt
    line
  arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line

 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts   | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++++
 2 files changed, 8 insertions(+)

-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] arm64: dts: g12a/g12b: add the Ethernet PHY GPIO IRQs
Date: Mon, 10 Jun 2019 18:45:29 +0200	[thread overview]
Message-ID: <20190610164531.8303-1-martin.blumenstingl@googlemail.com> (raw)

Avoid polling of the PHY status by passing the Ethernet PHY's GPIO
interrupt line to the PHY node.

I tested this successfully on my X96 Max, but I don't have an Odroid-N2
to test it there. The reset and interrupt GPIO part of the schematics
seems to be identical for both boards (and probably other "reference
design" based boards as well).

This depends on two of my other series:
1. "irqchip/meson-gpio: Add support for Meson-G12A SoC" from [0]
2. "Ethernet PHY reset GPIO updates for Amlogic SoCs" from [1]


[0] https://patchwork.kernel.org/cover/10983339/
[1] https://patchwork.kernel.org/cover/10985155/


Martin Blumenstingl (2):
  arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt
    line
  arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line

 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts   | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++++
 2 files changed, 8 insertions(+)

-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2019-06-10 16:45 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-10 16:45 Martin Blumenstingl [this message]
2019-06-10 16:45 ` [PATCH 0/2] arm64: dts: g12a/g12b: add the Ethernet PHY GPIO IRQs Martin Blumenstingl
2019-06-10 16:45 ` Martin Blumenstingl
2019-06-10 16:45 ` [PATCH 1/2] arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line Martin Blumenstingl
2019-06-10 16:45   ` Martin Blumenstingl
2019-06-10 16:45   ` Martin Blumenstingl
2019-06-14  9:16   ` Neil Armstrong
2019-06-14  9:16     ` Neil Armstrong
2019-06-14  9:16     ` Neil Armstrong
2019-06-10 16:45 ` [PATCH 2/2] arm64: dts: meson: g12a: x96-max: " Martin Blumenstingl
2019-06-10 16:45   ` Martin Blumenstingl
2019-06-10 16:45   ` Martin Blumenstingl
2019-06-14  9:20   ` Neil Armstrong
2019-06-14  9:20     ` Neil Armstrong
2019-06-14  9:20     ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190610164531.8303-1-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.