From: Christoph Hellwig <hch@lst.de> To: Palmer Dabbelt <palmer@sifive.com> Cc: Damien Le Moal <damien.lemoal@wdc.com>, linux-riscv@lists.infradead.org, uclinux-dev@uclinux.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org Subject: [PATCH 07/17] riscv: refactor the IPI code Date: Tue, 11 Jun 2019 00:16:11 +0200 [thread overview] Message-ID: <20190610221621.10938-8-hch@lst.de> (raw) In-Reply-To: <20190610221621.10938-1-hch@lst.de> This prepare for adding native non-SBI IPI code. Signed-off-by: Christoph Hellwig <hch@lst.de> --- arch/riscv/kernel/smp.c | 55 +++++++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c index b2537ffa855c..91164204496c 100644 --- a/arch/riscv/kernel/smp.c +++ b/arch/riscv/kernel/smp.c @@ -89,13 +89,38 @@ static void ipi_stop(void) wait_for_interrupt(); } +static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op) +{ + int cpuid, hartid; + struct cpumask hartid_mask; + + cpumask_clear(&hartid_mask); + mb(); + for_each_cpu(cpuid, mask) { + set_bit(op, &ipi_data[cpuid].bits); + hartid = cpuid_to_hartid_map(cpuid); + cpumask_set_cpu(hartid, &hartid_mask); + } + mb(); + sbi_send_ipi(cpumask_bits(&hartid_mask)); +} + +static void send_ipi_single(int cpu, enum ipi_message_type op) +{ + send_ipi_mask(cpumask_of(cpu), op); +} + +static inline void clear_ipi(void) +{ + csr_clear(CSR_SIP, SIE_SSIE); +} + void riscv_software_interrupt(void) { unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits; unsigned long *stats = ipi_data[smp_processor_id()].stats; - /* Clear pending IPI */ - csr_clear(CSR_SIP, SIE_SSIE); + clear_ipi(); while (true) { unsigned long ops; @@ -129,23 +154,6 @@ void riscv_software_interrupt(void) } } -static void -send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation) -{ - int cpuid, hartid; - struct cpumask hartid_mask; - - cpumask_clear(&hartid_mask); - mb(); - for_each_cpu(cpuid, to_whom) { - set_bit(operation, &ipi_data[cpuid].bits); - hartid = cpuid_to_hartid_map(cpuid); - cpumask_set_cpu(hartid, &hartid_mask); - } - mb(); - sbi_send_ipi(cpumask_bits(&hartid_mask)); -} - static const char * const ipi_names[] = { [IPI_RESCHEDULE] = "Rescheduling interrupts", [IPI_CALL_FUNC] = "Function call interrupts", @@ -167,12 +175,12 @@ void show_ipi_stats(struct seq_file *p, int prec) void arch_send_call_function_ipi_mask(struct cpumask *mask) { - send_ipi_message(mask, IPI_CALL_FUNC); + send_ipi_mask(mask, IPI_CALL_FUNC); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC); + send_ipi_single(cpu, IPI_CALL_FUNC); } void smp_send_stop(void) @@ -187,7 +195,7 @@ void smp_send_stop(void) if (system_state <= SYSTEM_RUNNING) pr_crit("SMP: stopping secondary CPUs\n"); - send_ipi_message(&mask, IPI_CPU_STOP); + send_ipi_mask(&mask, IPI_CPU_STOP); } /* Wait up to one second for other CPUs to stop */ @@ -202,6 +210,5 @@ void smp_send_stop(void) void smp_send_reschedule(int cpu) { - send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); + send_ipi_single(cpu, IPI_RESCHEDULE); } - -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Christoph Hellwig <hch@lst.de> To: Palmer Dabbelt <palmer@sifive.com> Cc: linux-mm@kvack.org, Damien Le Moal <damien.lemoal@wdc.com>, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, uclinux-dev@uclinux.org Subject: [PATCH 07/17] riscv: refactor the IPI code Date: Tue, 11 Jun 2019 00:16:11 +0200 [thread overview] Message-ID: <20190610221621.10938-8-hch@lst.de> (raw) In-Reply-To: <20190610221621.10938-1-hch@lst.de> This prepare for adding native non-SBI IPI code. Signed-off-by: Christoph Hellwig <hch@lst.de> --- arch/riscv/kernel/smp.c | 55 +++++++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c index b2537ffa855c..91164204496c 100644 --- a/arch/riscv/kernel/smp.c +++ b/arch/riscv/kernel/smp.c @@ -89,13 +89,38 @@ static void ipi_stop(void) wait_for_interrupt(); } +static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op) +{ + int cpuid, hartid; + struct cpumask hartid_mask; + + cpumask_clear(&hartid_mask); + mb(); + for_each_cpu(cpuid, mask) { + set_bit(op, &ipi_data[cpuid].bits); + hartid = cpuid_to_hartid_map(cpuid); + cpumask_set_cpu(hartid, &hartid_mask); + } + mb(); + sbi_send_ipi(cpumask_bits(&hartid_mask)); +} + +static void send_ipi_single(int cpu, enum ipi_message_type op) +{ + send_ipi_mask(cpumask_of(cpu), op); +} + +static inline void clear_ipi(void) +{ + csr_clear(CSR_SIP, SIE_SSIE); +} + void riscv_software_interrupt(void) { unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits; unsigned long *stats = ipi_data[smp_processor_id()].stats; - /* Clear pending IPI */ - csr_clear(CSR_SIP, SIE_SSIE); + clear_ipi(); while (true) { unsigned long ops; @@ -129,23 +154,6 @@ void riscv_software_interrupt(void) } } -static void -send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation) -{ - int cpuid, hartid; - struct cpumask hartid_mask; - - cpumask_clear(&hartid_mask); - mb(); - for_each_cpu(cpuid, to_whom) { - set_bit(operation, &ipi_data[cpuid].bits); - hartid = cpuid_to_hartid_map(cpuid); - cpumask_set_cpu(hartid, &hartid_mask); - } - mb(); - sbi_send_ipi(cpumask_bits(&hartid_mask)); -} - static const char * const ipi_names[] = { [IPI_RESCHEDULE] = "Rescheduling interrupts", [IPI_CALL_FUNC] = "Function call interrupts", @@ -167,12 +175,12 @@ void show_ipi_stats(struct seq_file *p, int prec) void arch_send_call_function_ipi_mask(struct cpumask *mask) { - send_ipi_message(mask, IPI_CALL_FUNC); + send_ipi_mask(mask, IPI_CALL_FUNC); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC); + send_ipi_single(cpu, IPI_CALL_FUNC); } void smp_send_stop(void) @@ -187,7 +195,7 @@ void smp_send_stop(void) if (system_state <= SYSTEM_RUNNING) pr_crit("SMP: stopping secondary CPUs\n"); - send_ipi_message(&mask, IPI_CPU_STOP); + send_ipi_mask(&mask, IPI_CPU_STOP); } /* Wait up to one second for other CPUs to stop */ @@ -202,6 +210,5 @@ void smp_send_stop(void) void smp_send_reschedule(int cpu) { - send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); + send_ipi_single(cpu, IPI_RESCHEDULE); } - -- 2.20.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2019-06-10 22:16 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-06-10 22:16 RISC-V nommu support Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 01/17] mm: provide a print_vma_addr stub for !CONFIG_MMU Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-11 10:11 ` Vladimir Murzin 2019-06-11 10:11 ` Vladimir Murzin 2019-06-10 22:16 ` [PATCH 02/17] mm: stub out all of swapops.h " Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-11 10:15 ` Vladimir Murzin 2019-06-11 10:15 ` Vladimir Murzin 2019-06-11 14:18 ` Christoph Hellwig 2019-06-11 14:18 ` Christoph Hellwig 2019-06-11 14:36 ` Vladimir Murzin 2019-06-11 14:36 ` Vladimir Murzin 2019-06-14 9:48 ` Christoph Hellwig 2019-06-14 9:48 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 03/17] mm/nommu: fix the MAP_UNINITIALIZED flag Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-11 10:19 ` Vladimir Murzin 2019-06-11 10:19 ` Vladimir Murzin 2019-06-10 22:16 ` [PATCH 04/17] irqchip/sifive-plic: set max threshold for ignored handlers Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 05/17] riscv: use CSR_SATP instead of the legacy sptbr name in switch_mm Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 06/17] riscv: clear the instruction cache and all registers when booting Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig [this message] 2019-06-10 22:16 ` [PATCH 07/17] riscv: refactor the IPI code Christoph Hellwig 2019-06-10 22:16 ` [PATCH 08/17] riscv: abstract out CSR names for supervisor vs machine mode Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 09/17] riscv: improve the default power off implementation Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 10/17] riscv: provide a flat entry loader Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 11/17] riscv: read hart ID from mhartid on boot Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 12/17] riscv: provide native clint access for M-mode Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 13/17] riscv: implement remote sfence.i natively " Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 14/17] riscv: poison SBI calls " Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 15/17] riscv: don't allow selecting SBI-based drivers " Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 16/17] riscv: use the correct interrupt levels " Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-10 22:16 ` [PATCH 17/17] riscv: add nommu support Christoph Hellwig 2019-06-10 22:16 ` Christoph Hellwig 2019-06-11 10:32 ` Vladimir Murzin 2019-06-11 10:32 ` Vladimir Murzin 2019-06-11 12:44 ` David Hildenbrand 2019-06-11 12:44 ` David Hildenbrand
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190610221621.10938-8-hch@lst.de \ --to=hch@lst.de \ --cc=damien.lemoal@wdc.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=linux-riscv@lists.infradead.org \ --cc=palmer@sifive.com \ --cc=uclinux-dev@uclinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.