All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: grygorii.strashko@ti.com, davem@davemloft.net
Cc: linux-omap@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Subject: [PATCH net-next] net: ethernet: ti: cpsw_ethtool: simplify slave loops
Date: Wed, 12 Jun 2019 00:59:40 +0300	[thread overview]
Message-ID: <20190611215940.32359-1-ivan.khoronzhuk@linaro.org> (raw)

Only for consistency reasons, do it like in main cpsw.c module
and use ndev reference but not by means of slave.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
---

Based on net-next/master

 drivers/net/ethernet/ti/cpsw_ethtool.c | 40 ++++++++++++++------------
 1 file changed, 21 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw_ethtool.c b/drivers/net/ethernet/ti/cpsw_ethtool.c
index 6d1c9ebae7cc..86697b32194d 100644
--- a/drivers/net/ethernet/ti/cpsw_ethtool.c
+++ b/drivers/net/ethernet/ti/cpsw_ethtool.c
@@ -458,7 +458,6 @@ int cpsw_nway_reset(struct net_device *ndev)
 static void cpsw_suspend_data_pass(struct net_device *ndev)
 {
 	struct cpsw_common *cpsw = ndev_to_cpsw(ndev);
-	struct cpsw_slave *slave;
 	int i;
 
 	/* Disable NAPI scheduling */
@@ -467,12 +466,13 @@ static void cpsw_suspend_data_pass(struct net_device *ndev)
 	/* Stop all transmit queues for every network device.
 	 * Disable re-using rx descriptors with dormant_on.
 	 */
-	for (i = cpsw->data.slaves, slave = cpsw->slaves; i; i--, slave++) {
-		if (!(slave->ndev && netif_running(slave->ndev)))
+	for (i = 0; i < cpsw->data.slaves; i++) {
+		ndev = cpsw->slaves[i].ndev;
+		if (!(ndev && netif_running(ndev)))
 			continue;
 
-		netif_tx_stop_all_queues(slave->ndev);
-		netif_dormant_on(slave->ndev);
+		netif_tx_stop_all_queues(ndev);
+		netif_dormant_on(ndev);
 	}
 
 	/* Handle rest of tx packets and stop cpdma channels */
@@ -483,13 +483,14 @@ static int cpsw_resume_data_pass(struct net_device *ndev)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
 	struct cpsw_common *cpsw = priv->cpsw;
-	struct cpsw_slave *slave;
 	int i, ret;
 
 	/* Allow rx packets handling */
-	for (i = cpsw->data.slaves, slave = cpsw->slaves; i; i--, slave++)
-		if (slave->ndev && netif_running(slave->ndev))
-			netif_dormant_off(slave->ndev);
+	for (i = 0; i < cpsw->data.slaves; i++) {
+		ndev = cpsw->slaves[i].ndev;
+		if (ndev && netif_running(ndev))
+			netif_dormant_off(ndev);
+	}
 
 	/* After this receive is started */
 	if (cpsw->usage_count) {
@@ -502,9 +503,11 @@ static int cpsw_resume_data_pass(struct net_device *ndev)
 	}
 
 	/* Resume transmit for every affected interface */
-	for (i = cpsw->data.slaves, slave = cpsw->slaves; i; i--, slave++)
-		if (slave->ndev && netif_running(slave->ndev))
-			netif_tx_start_all_queues(slave->ndev);
+	for (i = 0; i < cpsw->data.slaves; i++) {
+		ndev = cpsw->slaves[i].ndev;
+		if (ndev && netif_running(ndev))
+			netif_tx_start_all_queues(ndev);
+	}
 
 	return 0;
 }
@@ -587,7 +590,7 @@ int cpsw_set_channels_common(struct net_device *ndev,
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
 	struct cpsw_common *cpsw = priv->cpsw;
-	struct cpsw_slave *slave;
+	struct net_device *sl_ndev;
 	int i, ret;
 
 	ret = cpsw_check_ch_settings(cpsw, chs);
@@ -604,20 +607,19 @@ int cpsw_set_channels_common(struct net_device *ndev,
 	if (ret)
 		goto err;
 
-	for (i = cpsw->data.slaves, slave = cpsw->slaves; i; i--, slave++) {
-		if (!(slave->ndev && netif_running(slave->ndev)))
+	for (i = 0; i < cpsw->data.slaves; i++) {
+		sl_ndev = cpsw->slaves[i].ndev;
+		if (!(sl_ndev && netif_running(sl_ndev)))
 			continue;
 
 		/* Inform stack about new count of queues */
-		ret = netif_set_real_num_tx_queues(slave->ndev,
-						   cpsw->tx_ch_num);
+		ret = netif_set_real_num_tx_queues(sl_ndev, cpsw->tx_ch_num);
 		if (ret) {
 			dev_err(priv->dev, "cannot set real number of tx queues\n");
 			goto err;
 		}
 
-		ret = netif_set_real_num_rx_queues(slave->ndev,
-						   cpsw->rx_ch_num);
+		ret = netif_set_real_num_rx_queues(sl_ndev, cpsw->rx_ch_num);
 		if (ret) {
 			dev_err(priv->dev, "cannot set real number of rx queues\n");
 			goto err;
-- 
2.17.1


             reply	other threads:[~2019-06-11 21:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-11 21:59 Ivan Khoronzhuk [this message]
2019-06-15  1:46 ` [PATCH net-next] net: ethernet: ti: cpsw_ethtool: simplify slave loops David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190611215940.32359-1-ivan.khoronzhuk@linaro.org \
    --to=ivan.khoronzhuk@linaro.org \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.