From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
YouMin Chen <cym-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
gajjar04akash-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Manivannan Sadhasivam
<manivannan.sadhasivam-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v2 29/99] ram: rk3399: Handle pctl_cfg return type
Date: Mon, 17 Jun 2019 13:01:42 +0530 [thread overview]
Message-ID: <20190617073252.27810-30-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190617073252.27810-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add proper return type handling of pctl_cfg with
meaningful print statement.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
drivers/ram/rockchip/sdram_rk3399.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index dc9229ddf3..d408459daf 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -1119,6 +1119,7 @@ static int sdram_init(struct dram_info *dram,
unsigned char dramtype = params->base.dramtype;
unsigned int ddr_freq = params->base.ddr_freq;
int channel;
+ int ret;
debug("Starting SDRAM initialization...\n");
@@ -1138,9 +1139,10 @@ static int sdram_init(struct dram_info *dram,
if (channel >= params->base.num_channels)
continue;
- if (pctl_cfg(chan, channel, params) != 0) {
- printf("pctl_cfg fail, reset\n");
- return -EIO;
+ ret = pctl_cfg(chan, channel, params);
+ if (ret < 0) {
+ printf("%s: pctl config failed\n", __func__);
+ return ret;
}
/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 29/99] ram: rk3399: Handle pctl_cfg return type
Date: Mon, 17 Jun 2019 13:01:42 +0530 [thread overview]
Message-ID: <20190617073252.27810-30-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190617073252.27810-1-jagan@amarulasolutions.com>
Add proper return type handling of pctl_cfg with
meaningful print statement.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/ram/rockchip/sdram_rk3399.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index dc9229ddf3..d408459daf 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -1119,6 +1119,7 @@ static int sdram_init(struct dram_info *dram,
unsigned char dramtype = params->base.dramtype;
unsigned int ddr_freq = params->base.ddr_freq;
int channel;
+ int ret;
debug("Starting SDRAM initialization...\n");
@@ -1138,9 +1139,10 @@ static int sdram_init(struct dram_info *dram,
if (channel >= params->base.num_channels)
continue;
- if (pctl_cfg(chan, channel, params) != 0) {
- printf("pctl_cfg fail, reset\n");
- return -EIO;
+ ret = pctl_cfg(chan, channel, params);
+ if (ret < 0) {
+ printf("%s: pctl config failed\n", __func__);
+ return ret;
}
/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-06-17 7:31 UTC|newest]
Thread overview: 220+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-17 7:31 [PATCH v2 00/99] ram: rk3399: Add LPDDR4 support Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
[not found] ` <20190617073252.27810-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-06-17 7:31 ` [PATCH v2 01/99] ram: rk3399: Fix code warnings Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-07-15 12:31 ` Kever Yang
2019-07-15 12:31 ` [U-Boot] " Kever Yang
2019-06-17 7:31 ` [PATCH v2 02/99] ram: rk3399: Add space between string with format specifier Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 03/99] ram: rk3399: Add proper spaces in code Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 04/99] ram: rk3399: s/sdram_params/params Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 05/99] ram: rk3399: Handle data training return types Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 06/99] ram: rk3399: Order include files Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 07/99] ram: rk3399: Move macro after " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-07-15 12:39 ` Kever Yang
2019-07-15 12:39 ` [U-Boot] " Kever Yang
2019-06-17 7:31 ` [PATCH v2 08/99] ram: rk3399: Clear PI_175 interrupts in data training Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
[not found] ` <20190617073252.27810-9-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-07-15 12:39 ` Kever Yang
2019-07-15 12:39 ` [U-Boot] " Kever Yang
2019-06-17 7:31 ` [PATCH v2 09/99] ram: rk3399: Use rank mask in ca " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 10/99] ram: rk3399: Use rank mask in wdql " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 11/99] ram: rk3399: Add ddrtype enc macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 12/99] ram: rk3399: Add channel number encoder macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 13/99] ram: rk3399: Add row_3_4 enc macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 14/99] ram: rk3399: Add chipinfo macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 15/99] ram: rk3399: Add rank enc macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 16/99] ram: rk3399: Add column " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 17/99] ram: rk3399: Add bk " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 18/99] ram: rk3399: Add dbw " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 19/99] ram: rk3399: Add cs0_rw macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 20/99] ram: rk3399: Add cs1_rw macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 21/99] ram: rk3399: Add bw enc macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 22/99] ram: rk3399: Rename sys_reg with sys_reg2 Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 23/99] ram: rk3399: Update cs0_row to use sys_reg3 Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 24/99] ram: rk3399: Update cs1_row " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 25/99] ram: rk3399: Add cs1_col enc macro Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 26/99] ram: rk3399: Add ddr version " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 27/99] ram: rk3399: Add ddrtimingC0 Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 28/99] ram: rk3399: Add DdrMode Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` Jagan Teki [this message]
2019-06-17 7:31 ` [U-Boot] [PATCH v2 29/99] ram: rk3399: Handle pctl_cfg return type Jagan Teki
2019-06-17 7:31 ` [PATCH v2 30/99] ram: rk3399: s/tsel_wr_select_n/tsel_wr_select_dq_n Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 31/99] ram: rk3399: s/tsel_wr_select_p/tsel_wr_select_dq_p Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 32/99] ram: rk3399: s/ca_tsel_wr_select_n/tsel_wr_select_ca_n Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 33/99] ram: rk3399: s/ca_tsel_wr_select_p/tsel_wr_select_ca_p Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 34/99] ram: rk3399: Order tsel variables Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 35/99] ram: rk3399: Add phy pctrl reset support Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 36/99] ram: rk3399: Move pwrup_srefresh_exit to dram_info Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 37/99] ram: rk3399: Add pctl start support Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 38/99] ram: rockchip: rk3399: Add cap_info structure Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 39/99] ram: rk3399: s/rk3399_base_params/sdram_base_params Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 40/99] ram: rk3399: Move common sdram structures in common header Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 41/99] arm: include: rockchip: Move dramtypes to " Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 42/99] arm: include: rockchip: Add DDR4 enum Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 43/99] ram: rockchip: Add initial Kconfig Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 44/99] debug_uart: Add printdec Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 45/99] ram: rockchip: Add debug sdram driver Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:31 ` [PATCH v2 46/99] ram: rockchip: debug: Add sdram_print_ddr_info Jagan Teki
2019-06-17 7:31 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 47/99] ram: rockchip: debug: Get the cs capacity Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 48/99] ram: rk3399: debug: Add sdram_print_stride Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 49/99] ram: rk3399: Compute stride for 2 channels Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 50/99] ram: rk3399: Compute stride for 1 channel a Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 51/99] ram: rk3399: Add rank detection support Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 52/99] ram: rk3399: Enable sdram debug functions Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 53/99] rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 54/99] clk: rockchip: rk3399: Fix check patch warnings and checks Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 55/99] clk: rockchip: rk3399: Set 50MHz ddr clock Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 56/99] clk: rockchip: rk3399: Set 400MHz " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 57/99] ram: rk3399: Add spaces in pctl_cfg Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 58/99] ram: rk3399: Configure phy IO in ds odt Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 59/99] ram: rockchip: Kconfig: Add RK3399 LPDDR4 entry Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 60/99] ram: rk3399: Add lpddr4 rank mask for ca training Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 61/99] ram: rk3399: Add lpddr4 rank mask for wdql training Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 62/99] ram: rk3399: Move mode_sel assignment Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 63/99] ram: rk3399: Don't wait for PLL lock in lpddr4 Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 64/99] ram: rk3399: Avoid two channel ZQ Cal Start at the same time Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 65/99] ram: rk3399: Configure PHY_898, PHY_919 for lpddr4 Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 66/99] ram: rk3399: Configure BOOSTP_EN, BOOSTN_EN " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 67/99] ram: rk3399: Configure SLEWP_EN, SLEWN_EN " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 68/99] ram: rk3399: Configure PHY RX_CM_INPUT " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 69/99] ram: rk3399: Map chipselect " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 70/99] ram: rk3399: Configure tsel write ca " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 71/99] ram: rk3399: Don't disable dfi dram clk for lpddr4, rank 1 Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 72/99] ram: rk3399: Add IO settings Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 73/99] ram: sdram: Configure lpddr4 tsel rd, wr based on " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 74/99] ram: rk3399: Add tsel control clock drive Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 75/99] ram: rk3399: Configure soc odt support Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 76/99] ram: rk3399: Get lpddr4 tsel_rd_en from io settings Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 77/99] ram: rk3399: Update lpddr4 vref based on " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 78/99] ram: rk3399: Update lpddr4 mode_sel " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 79/99] ram: rk3399: Update lpddr4 vref_mode_ac Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 80/99] ram: rk3399: Simplify data training first argument Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 81/99] ram: rk3399: Handle data training via ops Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 82/99] ram: rk3399: Add LPPDR4 mr detection Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 83/99] arm: include: rockchip: Add rk3399 pmu file Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 84/99] rockchip: rk3399: syscon: Add pmu support Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 85/99] rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for pmu Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 86/99] ram: rk3399: Add LPPDDR4-400 timings inc Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 87/99] ram: rk3399: Add LPPDDR4-800 " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 88/99] ram: rk3399: Add set_rate sdram rk3399 ops Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 89/99] ram: rk3399: Add lpddr4 set rate support Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 90/99] ram: rk3399: Set lpddr4 dq odt Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 91/99] ram: rk3399: Set lpddr4 ca odt Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 92/99] ram: rk3399: Set lpddr4 MR3 Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 93/99] ram: rk3399: Set lpddr4 MR12 Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 94/99] ram: rk3399: Set lpddr4 MR14 Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 95/99] configs: rockpro64: Enable LPDDR4 support Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 96/99] configs: rock-pi-4: " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 97/99] rockchip: dts: rk3399: Add LPDDR4-100 timings Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 98/99] rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsi Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-17 7:32 ` [PATCH v2 99/99] rockchip: dts: rk3399: rock-pi-4: " Jagan Teki
2019-06-17 7:32 ` [U-Boot] " Jagan Teki
2019-06-21 0:28 ` [PATCH v2 00/99] ram: rk3399: Add LPDDR4 support Vasily Khoruzhick
2019-06-21 0:28 ` [U-Boot] " Vasily Khoruzhick
2019-06-25 15:46 ` Jagan Teki
2019-06-25 15:46 ` [U-Boot] " Jagan Teki
2019-06-25 18:42 ` Ezequiel Garcia
2019-06-25 18:42 ` [U-Boot] " Ezequiel Garcia
[not found] ` <CAAEAJfAxgF2JqOUhjXLmn5RVGMLbM2-7JqsyZgXvfU6Q9ScK+A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-06-26 10:22 ` Jagan Teki
2019-06-26 10:22 ` Jagan Teki
2019-07-04 10:27 ` Kever Yang
2019-07-04 10:54 ` Jagan Teki
2019-07-05 7:38 ` Kever Yang
2019-06-25 8:43 ` Mark Kettenis
2019-06-25 8:43 ` [U-Boot] " Mark Kettenis
2019-07-07 13:17 ` Chris Webb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190617073252.27810-30-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=cym-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=gajjar04akash-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=manivannan.sadhasivam-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.