[PATCH 3/5] clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate()

[Geert Uytterhoeven <geert+renesas@glider.be>]

As the .round_rate() callback returns a long clock rate, it cannot
return clock rates that do not fit in signed long, but do fit in
unsigned long.  Hence switch the Z clocks on R-Car Gen3 from the old
.round_rate() callback to the newer .determine_rate() callback, which
does not suffer from this limitation.

This includes implementing range checking.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/rcar-gen3-cpg.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index d25c8ba00a656841..2268f44ccb8fe9bc 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -114,18 +114,24 @@ static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
 				     32 * zclk->fixed_div);
 }
 
-static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
-				 unsigned long *parent_rate)
+static int cpg_z_clk_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
 	struct cpg_z_clk *zclk = to_z_clk(hw);
+	unsigned int min_mult, max_mult, mult;
 	unsigned long prate;
-	unsigned int mult;
 
-	prate = *parent_rate / zclk->fixed_div;
-	mult = div_u64(rate * 32ULL, prate);
-	mult = clamp(mult, 1U, 32U);
+	prate = req->best_parent_rate / zclk->fixed_div;
+	min_mult = max(div_u64(req->min_rate * 32ULL, prate), 1ULL);
+	max_mult = min(div_u64(req->max_rate * 32ULL, prate), 32ULL);
+	if (max_mult < min_mult)
+		return -EINVAL;
 
-	return (u64)prate * mult / 32;
+	mult = div_u64(req->rate * 32ULL, prate);
+	mult = clamp(mult, min_mult, max_mult);
+
+	req->rate = (u64)prate * mult / 32;
+	return 0;
 }
 
 static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -172,7 +178,7 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static const struct clk_ops cpg_z_clk_ops = {
 	.recalc_rate = cpg_z_clk_recalc_rate,
-	.round_rate = cpg_z_clk_round_rate,
+	.determine_rate = cpg_z_clk_determine_rate,
 	.set_rate = cpg_z_clk_set_rate,
 };
 
-- 
2.17.1