All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: xen-devel@lists.xenproject.org
Cc: Stefano Stabellini <stefanos@xilinx.com>,
	julien.grall@arm.com, sstabellini@kernel.org, JBeulich@suse.com,
	andrew.cooper3@citrix.com
Subject: [Xen-devel] [PATCH v3 2/5] xen: extend XEN_DOMCTL_memory_mapping to handle memory policy
Date: Tue, 18 Jun 2019 16:20:16 -0700	[thread overview]
Message-ID: <20190618232019.26425-2-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.21.1906181618130.2072@sstabellini-ThinkPad-T480s>

Reuse the existing padding field to pass memory policy information. On
Arm, the caller can specify whether the memory should be mapped as
Device-nGnRE (Device Memory on Armv7) at stage-2, which is the default
and the only possibility today, or cacheable memory write-back. The
resulting memory attributes will be a combination of stage-2 and stage-1
memory attributes: it will actually be the strongest between the 2
stages attributes.

On x86, the only option is uncachable. The current behavior becomes the
default (numerically '0'). Also explicitely set the memory_policy field
to 0 in libxc.

On ARM, map Device-nGnRE as p2m_mmio_direct_dev (as it is already done
today) and WB cacheable memory as p2m_mmio_direct_c.

On x86, return error if the memory policy requested is not
MEMORY_POLICY_X86_UC_MINUS.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
CC: JBeulich@suse.com
CC: andrew.cooper3@citrix.com

---

Andrew suggested to remove MEMORY_POLICY_X86_UC_MINUS completely.
If that's the consensus I am happy to respin the series removing code.


Changes in v3:
- error handling in default label of the switch
- set memory_policy to 0 in libxc
- improve commit message
- improve comments
- s/Device-nGRE/Device-nGnRE/g
- add in-code comment
- s/MEMORY_POLICY_X86_UC/MEMORY_POLICY_X86_UC_MINUS/g
- #ifdef hypercall defines according to arch

Changes in v2:
- rebase
- use p2m_mmio_direct_c
- use EOPNOTSUPP
- rename cache_policy to memory policy
- rename MEMORY_POLICY_DEVMEM to MEMORY_POLICY_ARM_DEV_nGRE
- rename MEMORY_POLICY_MEMORY to MEMORY_POLICY_ARM_MEM_WB
- add MEMORY_POLICY_X86_UC
- add MEMORY_POLICY_DEFAULT and use it
---
 tools/libxc/xc_domain.c     |  1 +
 xen/common/domctl.c         | 24 ++++++++++++++++++++++--
 xen/include/public/domctl.h | 23 ++++++++++++++++++++++-
 3 files changed, 45 insertions(+), 3 deletions(-)

diff --git a/tools/libxc/xc_domain.c b/tools/libxc/xc_domain.c
index 05d771f2ce..8531298563 100644
--- a/tools/libxc/xc_domain.c
+++ b/tools/libxc/xc_domain.c
@@ -2070,6 +2070,7 @@ int xc_domain_memory_mapping(
     domctl.cmd = XEN_DOMCTL_memory_mapping;
     domctl.domain = domid;
     domctl.u.memory_mapping.add_mapping = add_mapping;
+    domctl.u.memory_mapping.memory_policy = 0;
     max_batch_sz = nr_mfns;
     do
     {
diff --git a/xen/common/domctl.c b/xen/common/domctl.c
index c6fd88d285..f21f6957b0 100644
--- a/xen/common/domctl.c
+++ b/xen/common/domctl.c
@@ -928,6 +928,7 @@ long do_domctl(XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl)
         unsigned long mfn_end = mfn + nr_mfns - 1;
         int add = op->u.memory_mapping.add_mapping;
         p2m_type_t p2mt;
+        uint32_t memory_policy = op->u.memory_mapping.memory_policy;
 
         ret = -EINVAL;
         if ( mfn_end < mfn || /* wrap? */
@@ -958,9 +959,28 @@ long do_domctl(XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl)
         if ( add )
         {
             printk(XENLOG_G_DEBUG
-                   "memory_map:add: dom%d gfn=%lx mfn=%lx nr=%lx\n",
-                   d->domain_id, gfn, mfn, nr_mfns);
+                   "memory_map:add: dom%d gfn=%lx mfn=%lx nr=%lx cache=%u\n",
+                   d->domain_id, gfn, mfn, nr_mfns, memory_policy);
 
+            switch ( memory_policy )
+            {
+#ifdef CONFIG_ARM
+                case MEMORY_POLICY_ARM_MEM_WB:
+                    p2mt = p2m_mmio_direct_c;
+                    break;
+                case MEMORY_POLICY_ARM_DEV_nGnRE:
+                    p2mt = p2m_mmio_direct_dev;
+                    break;
+#endif
+#ifdef CONFIG_X86
+                case MEMORY_POLICY_X86_UC_MINUS:
+                    p2mt = p2m_mmio_direct;
+                    break;
+#endif
+                default:
+                    domctl_lock_release();
+                    goto domctl_out_unlock_domonly;
+            }
             ret = map_mmio_regions(d, _gfn(gfn), nr_mfns, _mfn(mfn), p2mt);
             if ( ret < 0 )
                 printk(XENLOG_G_WARNING
diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
index 19486d5e32..e51caada35 100644
--- a/xen/include/public/domctl.h
+++ b/xen/include/public/domctl.h
@@ -571,12 +571,33 @@ struct xen_domctl_bind_pt_irq {
 */
 #define DPCI_ADD_MAPPING         1
 #define DPCI_REMOVE_MAPPING      0
+/*
+ * Default memory policy. Corresponds to:
+ * Arm: MEMORY_POLICY_ARM_DEV_nGnRE
+ * x86: MEMORY_POLICY_X86_UC_MINUS
+ */
+#define MEMORY_POLICY_DEFAULT         0
+#if defined(__i386__) || defined(__x86_64__)
+/* x86 only. Memory type UNCACHABLE */
+# define MEMORY_POLICY_X86_UC_MINUS    0
+#elif defined(__arm__) || defined (__aarch64__)
+/* Arm only. Outer Shareable, Device-nGnRE memory (Device Memory on Armv7) */
+# define MEMORY_POLICY_ARM_DEV_nGnRE      0
+/* Arm only. Outer Shareable, Outer/Inner Write-Back Cacheable memory */
+# define MEMORY_POLICY_ARM_MEM_WB         1
+/*
+ * On ARM, MEMORY_POLICY selects the stage-2 memory attributes, but note
+ * that the resulting memory attributes will be a combination of stage-2
+ * and stage-1 memory attributes: it will be the strongest between the 2
+ * stages attributes.
+ */
+#endif
 struct xen_domctl_memory_mapping {
     uint64_aligned_t first_gfn; /* first page (hvm guest phys page) in range */
     uint64_aligned_t first_mfn; /* first page (machine page) in range */
     uint64_aligned_t nr_mfns;   /* number of pages in range (>0) */
     uint32_t add_mapping;       /* add or remove mapping */
-    uint32_t padding;           /* padding for 64-bit aligned structure */
+    uint32_t memory_policy;      /* cacheability of the memory mapping */
 };
 
 
-- 
2.17.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2019-06-18 23:20 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18 23:20 [Xen-devel] [PATCH v3 0/5] iomem memory policy Stefano Stabellini
2019-06-18 23:20 ` [Xen-devel] [PATCH v3 1/5] xen: add a p2mt parameter to map_mmio_regions Stefano Stabellini
2019-06-19  7:42   ` Jan Beulich
2019-08-06 23:05     ` Stefano Stabellini
2019-07-10 17:17   ` Julien Grall
2019-08-06 23:38     ` Stefano Stabellini
2019-08-07 10:35       ` Julien Grall
2019-06-18 23:20 ` Stefano Stabellini [this message]
2019-06-19  7:48   ` [Xen-devel] [PATCH v3 2/5] xen: extend XEN_DOMCTL_memory_mapping to handle memory policy Jan Beulich
2019-08-06 23:57     ` Stefano Stabellini
2019-07-10 17:39   ` Julien Grall
2019-08-06 23:42     ` Stefano Stabellini
2019-06-18 23:20 ` [Xen-devel] [PATCH v3 3/5] libxc: introduce xc_domain_mem_map_policy Stefano Stabellini
2019-06-18 23:20 ` [Xen-devel] [PATCH v3 4/5] libxl/xl: add memory policy option to iomem Stefano Stabellini
2019-07-10 19:02   ` Julien Grall
2019-06-18 23:20 ` [Xen-devel] [PATCH v3 5/5] xen/arm: clarify the support status of iomem configurations Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618232019.26425-2-sstabellini@kernel.org \
    --to=sstabellini@kernel.org \
    --cc=JBeulich@suse.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=julien.grall@arm.com \
    --cc=stefanos@xilinx.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.