From: Lubomir Rintel <lkundrak@v3.sk>
To: Olof Johansson <olof@lixom.net>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 5/5] ARM: dts: mmp2: specify reg-shift for the UARTs
Date: Thu, 20 Jun 2019 17:07:24 +0200 [thread overview]
Message-ID: <20190620150724.1406757-6-lkundrak@v3.sk> (raw)
In-Reply-To: <20190620150724.1406757-1-lkundrak@v3.sk>
This makes the 8250_of driver happy. There are two more drivers in the
tree that bind to mrvl,mmp-uart compatibles: pxa and 8250_pxa and
neither of them requires the reg-shift property, assuming it's always 2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp2.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 68b547077323..6a2f072c1d0a 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -214,6 +214,7 @@
interrupts = <27>;
clocks = <&soc_clocks MMP2_CLK_UART0>;
resets = <&soc_clocks MMP2_CLK_UART0>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -223,6 +224,7 @@
interrupts = <28>;
clocks = <&soc_clocks MMP2_CLK_UART1>;
resets = <&soc_clocks MMP2_CLK_UART1>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -232,6 +234,7 @@
interrupts = <24>;
clocks = <&soc_clocks MMP2_CLK_UART2>;
resets = <&soc_clocks MMP2_CLK_UART2>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -241,6 +244,7 @@
interrupts = <46>;
clocks = <&soc_clocks MMP2_CLK_UART3>;
resets = <&soc_clocks MMP2_CLK_UART3>;
+ reg-shift = <2>;
status = "disabled";
};
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk>
To: Olof Johansson <olof@lixom.net>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Lubomir Rintel <lkundrak@v3.sk>, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] ARM: dts: mmp2: specify reg-shift for the UARTs
Date: Thu, 20 Jun 2019 17:07:24 +0200 [thread overview]
Message-ID: <20190620150724.1406757-6-lkundrak@v3.sk> (raw)
In-Reply-To: <20190620150724.1406757-1-lkundrak@v3.sk>
This makes the 8250_of driver happy. There are two more drivers in the
tree that bind to mrvl,mmp-uart compatibles: pxa and 8250_pxa and
neither of them requires the reg-shift property, assuming it's always 2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp2.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 68b547077323..6a2f072c1d0a 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -214,6 +214,7 @@
interrupts = <27>;
clocks = <&soc_clocks MMP2_CLK_UART0>;
resets = <&soc_clocks MMP2_CLK_UART0>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -223,6 +224,7 @@
interrupts = <28>;
clocks = <&soc_clocks MMP2_CLK_UART1>;
resets = <&soc_clocks MMP2_CLK_UART1>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -232,6 +234,7 @@
interrupts = <24>;
clocks = <&soc_clocks MMP2_CLK_UART2>;
resets = <&soc_clocks MMP2_CLK_UART2>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -241,6 +244,7 @@
interrupts = <46>;
clocks = <&soc_clocks MMP2_CLK_UART3>;
resets = <&soc_clocks MMP2_CLK_UART3>;
+ reg-shift = <2>;
status = "disabled";
};
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-20 15:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-20 15:07 [PATCH 0/5] ARM: dts: mmp2: devicetree updates Lubomir Rintel
2019-06-20 15:07 ` Lubomir Rintel
2019-06-20 15:07 ` [PATCH 1/5] ARM: dts: mmp2: trivial whitespace fix Lubomir Rintel
2019-06-20 15:07 ` Lubomir Rintel
2019-06-20 15:07 ` [PATCH 2/5] ARM: dts: mmp2: fix the SPI nodes Lubomir Rintel
2019-06-20 15:07 ` Lubomir Rintel
2019-06-20 15:07 ` [PATCH 3/5] ARM: dts: mmp2: rename the USB PHY node Lubomir Rintel
2019-06-20 15:07 ` Lubomir Rintel
2019-06-20 15:07 ` Lubomir Rintel
2019-06-20 15:07 ` [PATCH 4/5] ARM: dts: mmp2: add camera interfaces Lubomir Rintel
2019-06-20 15:07 ` Lubomir Rintel
2019-06-20 15:07 ` Lubomir Rintel [this message]
2019-06-20 15:07 ` [PATCH 5/5] ARM: dts: mmp2: specify reg-shift for the UARTs Lubomir Rintel
2019-07-25 11:07 [PATCH RESEND 0/5] ARM: dts: mmp2: devicetree updates Lubomir Rintel
2019-07-25 11:07 ` [PATCH 5/5] ARM: dts: mmp2: specify reg-shift for the UARTs Lubomir Rintel
2019-07-25 11:07 ` Lubomir Rintel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190620150724.1406757-6-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.