All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yangtao Li <tiny.windzz@gmail.com>
To: rui.zhang@intel.com, edubezval@gmail.com,
	daniel.lezcano@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org,
	davem@davemloft.net, gregkh@linuxfoundation.org,
	mchehab+samsung@kernel.org, linus.walleij@linaro.org,
	nicolas.ferre@microchip.com, paulmck@linux.ibm.com
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Yangtao Li <tiny.windzz@gmail.com>
Subject: [PATCH v4 10/11] dt-bindings: thermal: add binding document for h3 thermal controller
Date: Sun, 23 Jun 2019 12:42:05 -0400	[thread overview]
Message-ID: <20190623164206.7467-11-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190623164206.7467-1-tiny.windzz@gmail.com>

This patch adds binding document for allwinner h3 thermal controller.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 .../bindings/thermal/sun8i-thermal.yaml       | 29 +++++++++++++++++--
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
index 2c5acc61ed03..1eaf68b5dd5a 100644
--- a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
@@ -16,6 +16,7 @@ description: |-
 properties:
   compatible:
     enum:
+      - allwinner,sun8i-h3-ths
       - allwinner,sun50i-h6-ths
 
   reg:
@@ -29,13 +30,22 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 1
+    maxItems: 2
 
   clock-names:
-    const: bus
+    items:
+      - const: bus
+      - const: ahb
 
   '#thermal-sensor-cells':
-    const: 1
+    enum: [ 0, 1 ]
+    description: |
+      Definition depends on soc version:
+
+      For "allwinner,sun8i-h3-ths",
+      value must be 0.
+      For "allwinner,sun50i-h6-ths",
+      value must be 1.
 
   nvmem-cells:
     items:
@@ -55,6 +65,19 @@ required:
   - '#thermal-sensor-cells'
 
 examples:
+  - |
+    ths: ths@1c25000 {
+         compatible = "allwinner,sun8i-h3-ths";
+         reg = <0x01c25000 0x400>;
+         clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+         clock-names = "bus", "ahb";
+         resets = <&ccu RST_BUS_THS>;
+         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+         nvmem-cells = <&tsen_calib>;
+         nvmem-cell-names = "calib";
+         #thermal-sensor-cells = <0>;
+    };
+
   - |
     ths: ths@5070400 {
          compatible = "allwinner,sun50i-h6-ths";
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Yangtao Li <tiny.windzz@gmail.com>
To: rui.zhang@intel.com, edubezval@gmail.com,
	daniel.lezcano@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org,
	davem@davemloft.net, gregkh@linuxfoundation.org,
	mchehab+samsung@kernel.org, linus.walleij@linaro.org,
	nicolas.ferre@microchip.com, paulmck@linux.ibm.com
Cc: Yangtao Li <tiny.windzz@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v4 10/11] dt-bindings: thermal: add binding document for h3 thermal controller
Date: Sun, 23 Jun 2019 12:42:05 -0400	[thread overview]
Message-ID: <20190623164206.7467-11-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190623164206.7467-1-tiny.windzz@gmail.com>

This patch adds binding document for allwinner h3 thermal controller.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 .../bindings/thermal/sun8i-thermal.yaml       | 29 +++++++++++++++++--
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
index 2c5acc61ed03..1eaf68b5dd5a 100644
--- a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
@@ -16,6 +16,7 @@ description: |-
 properties:
   compatible:
     enum:
+      - allwinner,sun8i-h3-ths
       - allwinner,sun50i-h6-ths
 
   reg:
@@ -29,13 +30,22 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 1
+    maxItems: 2
 
   clock-names:
-    const: bus
+    items:
+      - const: bus
+      - const: ahb
 
   '#thermal-sensor-cells':
-    const: 1
+    enum: [ 0, 1 ]
+    description: |
+      Definition depends on soc version:
+
+      For "allwinner,sun8i-h3-ths",
+      value must be 0.
+      For "allwinner,sun50i-h6-ths",
+      value must be 1.
 
   nvmem-cells:
     items:
@@ -55,6 +65,19 @@ required:
   - '#thermal-sensor-cells'
 
 examples:
+  - |
+    ths: ths@1c25000 {
+         compatible = "allwinner,sun8i-h3-ths";
+         reg = <0x01c25000 0x400>;
+         clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+         clock-names = "bus", "ahb";
+         resets = <&ccu RST_BUS_THS>;
+         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+         nvmem-cells = <&tsen_calib>;
+         nvmem-cell-names = "calib";
+         #thermal-sensor-cells = <0>;
+    };
+
   - |
     ths: ths@5070400 {
          compatible = "allwinner,sun50i-h6-ths";
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-23 16:42 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-23 16:41 [PATCH v4 00/11] add thermal driver for h6 Yangtao Li
2019-06-23 16:41 ` Yangtao Li
2019-06-23 16:41 ` Yangtao Li
2019-06-23 16:41 ` [PATCH v4 01/11] thermal: sun8i: " Yangtao Li
2019-06-23 16:41   ` Yangtao Li
2019-06-23 16:41   ` Yangtao Li
2019-06-24 12:07   ` Ondřej Jirman
2019-06-24 12:07     ` Ondřej Jirman
2019-06-23 16:41 ` [PATCH v4 02/11] dt-bindings: thermal: add binding document for h6 thermal controller Yangtao Li
2019-06-23 16:41   ` Yangtao Li
2019-06-24  8:47   ` Maxime Ripard
2019-06-24  8:47     ` Maxime Ripard
2019-06-23 16:41 ` [PATCH v4 03/11] thermal: fix indentation in makefile Yangtao Li
2019-06-23 16:41   ` Yangtao Li
2019-06-23 16:41 ` [PATCH v4 04/11] thermal: sun8i: get ths sensor number from device compatible Yangtao Li
2019-06-23 16:41   ` Yangtao Li
2019-06-23 16:42 ` [PATCH v4 05/11] thermal: sun8i: rework for sun8i_ths_get_temp() Yangtao Li
2019-06-23 16:42   ` Yangtao Li
2019-06-23 16:42 ` [PATCH v4 06/11] thermal: sun8i: get ths init func from device compatible Yangtao Li
2019-06-23 16:42   ` Yangtao Li
2019-06-23 16:42 ` [PATCH v4 07/11] thermal: sun8i: rework for ths irq handler func Yangtao Li
2019-06-23 16:42   ` Yangtao Li
2019-06-23 16:42 ` [PATCH v4 08/11] thermal: sun8i: support ahb clocks Yangtao Li
2019-06-23 16:42   ` Yangtao Li
2019-06-24 18:23   ` Maxime Ripard
2019-06-24 18:23     ` Maxime Ripard
2019-06-25  0:34     ` Ondřej Jirman
2019-06-25  0:34       ` Ondřej Jirman
2019-06-25  8:25       ` Maxime Ripard
2019-06-25  8:25         ` Maxime Ripard
2019-06-23 16:42 ` [PATCH v4 09/11] thermal: sun8i: rework for ths calibrate func Yangtao Li
2019-06-23 16:42   ` Yangtao Li
2019-06-23 16:42 ` Yangtao Li [this message]
2019-06-23 16:42   ` [PATCH v4 10/11] dt-bindings: thermal: add binding document for h3 thermal controller Yangtao Li
2019-06-24  8:50   ` Maxime Ripard
2019-06-24  8:50     ` Maxime Ripard
2019-06-23 16:42 ` [PATCH v4 11/11] thermal: sun8i: add thermal driver for h3 Yangtao Li
2019-06-23 16:42   ` Yangtao Li
2019-06-24 12:05   ` Ondřej Jirman
2019-06-24 12:05     ` Ondřej Jirman
2019-07-10 23:09 ` [PATCH v4 00/11] add thermal driver for h6 Vasily Khoruzhick
2019-07-10 23:09   ` Vasily Khoruzhick
2019-07-13 18:01   ` Vasily Khoruzhick
2019-07-13 18:01     ` Vasily Khoruzhick
2019-07-26 17:46     ` Vasily Khoruzhick
2019-07-26 17:46       ` Vasily Khoruzhick
2019-07-28 12:11       ` Frank Lee
2019-07-28 12:11         ` Frank Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190623164206.7467-11-tiny.windzz@gmail.com \
    --to=tiny.windzz@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=paulmck@linux.ibm.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.