From: chunguo feng <chunguo.feng@amlogic.com> To: <lgirdwood@gmail.com> Cc: <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com>, <RyanS.Lee@maximintegrated.com>, <bleung@chromium.org>, <pierre-louis.bossart@linux.intel.com>, <grundler@chromium.org>, <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>, <chunguo.feng@amlogic.com> Subject: [PATCH] ASoC: max98383: fix i2c probe failure Date: Mon, 15 Jul 2019 17:55:56 +0800 [thread overview] Message-ID: <20190715095556.1614-1-chunguo.feng@amlogic.com> (raw) From: fengchunguo <chunguo.feng@amlogic.com> Added reset_gpio configuration for i2c probe successfully. If not,i2c address can't be found rightly. Error information: max98373 3-0031: Failed to read: 0x21FF Fixed: [3.761299@3] max98373 3-0031: MAX98373 revisionID: 0x43 [3.828911@3] asoc-aml-card auge_sound: max98373-aif1 <-> TDM-B mapping ok Signed-off-by: fengchunguo <chunguo.feng@amlogic.com> --- sound/soc/codecs/max98373.c | 34 ++++++++++++++++++++++++++++++---- sound/soc/codecs/max98373.h | 1 + 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index 528695cd6a1c..9a1eb7222357 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -12,6 +12,7 @@ #include <sound/pcm_params.h> #include <sound/soc.h> #include <linux/gpio.h> +#include <linux/of.h> #include <linux/of_gpio.h> #include <sound/tlv.h> #include "max98373.h" @@ -895,6 +896,17 @@ static void max98373_slot_config(struct i2c_client *i2c, else max98373->i_slot = 1; + max98373->reset_gpio = of_get_named_gpio(dev->of_node, + "maxim,reset-gpio", 0); + if (!gpio_is_valid(max98373->reset_gpio)) { + dev_err(dev, "Looking up %s property in node %s failed %d\n", + "maxim,reset-gpio", dev->of_node->full_name, + max98373->reset_gpio); + } else { + dev_dbg(dev, "maxim,reset-gpio=%d", + max98373->reset_gpio); + } + if (!device_property_read_u32(dev, "maxim,spkfb-slot-no", &value)) max98373->spkfb_slot = value & 0xF; else @@ -923,7 +935,6 @@ static int max98373_i2c_probe(struct i2c_client *i2c, else max98373->interleave_mode = false; - /* regmap initialization */ max98373->regmap = devm_regmap_init_i2c(i2c, &max98373_regmap); @@ -934,6 +945,24 @@ static int max98373_i2c_probe(struct i2c_client *i2c, return ret; } + /* voltage/current slot & gpio configuration */ + max98373_slot_config(i2c, max98373); + + /* Power on device */ + if (gpio_is_valid(max98373->reset_gpio)) { + ret = gpio_request(max98373->reset_gpio, "MAX98373_RESET"); + if (ret) { + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", + __func__, max98373->reset_gpio); + gpio_free(max98373->reset_gpio); + return -EINVAL; + } + gpio_direction_output(max98373->reset_gpio, 0); + msleep(50); + gpio_direction_output(max98373->reset_gpio, 1); + msleep(20); + } + /* Check Revision ID */ ret = regmap_read(max98373->regmap, MAX98373_R21FF_REV_ID, ®); @@ -944,9 +973,6 @@ static int max98373_i2c_probe(struct i2c_client *i2c, } dev_info(&i2c->dev, "MAX98373 revisionID: 0x%02X\n", reg); - /* voltage/current slot configuration */ - max98373_slot_config(i2c, max98373); - /* codec registeration */ ret = devm_snd_soc_register_component(&i2c->dev, &soc_codec_dev_max98373, max98373_dai, ARRAY_SIZE(max98373_dai)); diff --git a/sound/soc/codecs/max98373.h b/sound/soc/codecs/max98373.h index f6a37aa02f26..533d2053f608 100644 --- a/sound/soc/codecs/max98373.h +++ b/sound/soc/codecs/max98373.h @@ -203,6 +203,7 @@ struct max98373_priv { struct regmap *regmap; + int reset_gpio; unsigned int v_slot; unsigned int i_slot; unsigned int spkfb_slot; -- 2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: chunguo feng <chunguo.feng@amlogic.com> To: lgirdwood@gmail.com Cc: broonie@kernel.org, perex@perex.cz, tiwai@suse.com, RyanS.Lee@maximintegrated.com, bleung@chromium.org, pierre-louis.bossart@linux.intel.com, grundler@chromium.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, chunguo.feng@amlogic.com Subject: [PATCH] ASoC: max98383: fix i2c probe failure Date: Mon, 15 Jul 2019 17:55:56 +0800 [thread overview] Message-ID: <20190715095556.1614-1-chunguo.feng@amlogic.com> (raw) From: fengchunguo <chunguo.feng@amlogic.com> Added reset_gpio configuration for i2c probe successfully. If not,i2c address can't be found rightly. Error information: max98373 3-0031: Failed to read: 0x21FF Fixed: [3.761299@3] max98373 3-0031: MAX98373 revisionID: 0x43 [3.828911@3] asoc-aml-card auge_sound: max98373-aif1 <-> TDM-B mapping ok Signed-off-by: fengchunguo <chunguo.feng@amlogic.com> --- sound/soc/codecs/max98373.c | 34 ++++++++++++++++++++++++++++++---- sound/soc/codecs/max98373.h | 1 + 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index 528695cd6a1c..9a1eb7222357 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -12,6 +12,7 @@ #include <sound/pcm_params.h> #include <sound/soc.h> #include <linux/gpio.h> +#include <linux/of.h> #include <linux/of_gpio.h> #include <sound/tlv.h> #include "max98373.h" @@ -895,6 +896,17 @@ static void max98373_slot_config(struct i2c_client *i2c, else max98373->i_slot = 1; + max98373->reset_gpio = of_get_named_gpio(dev->of_node, + "maxim,reset-gpio", 0); + if (!gpio_is_valid(max98373->reset_gpio)) { + dev_err(dev, "Looking up %s property in node %s failed %d\n", + "maxim,reset-gpio", dev->of_node->full_name, + max98373->reset_gpio); + } else { + dev_dbg(dev, "maxim,reset-gpio=%d", + max98373->reset_gpio); + } + if (!device_property_read_u32(dev, "maxim,spkfb-slot-no", &value)) max98373->spkfb_slot = value & 0xF; else @@ -923,7 +935,6 @@ static int max98373_i2c_probe(struct i2c_client *i2c, else max98373->interleave_mode = false; - /* regmap initialization */ max98373->regmap = devm_regmap_init_i2c(i2c, &max98373_regmap); @@ -934,6 +945,24 @@ static int max98373_i2c_probe(struct i2c_client *i2c, return ret; } + /* voltage/current slot & gpio configuration */ + max98373_slot_config(i2c, max98373); + + /* Power on device */ + if (gpio_is_valid(max98373->reset_gpio)) { + ret = gpio_request(max98373->reset_gpio, "MAX98373_RESET"); + if (ret) { + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", + __func__, max98373->reset_gpio); + gpio_free(max98373->reset_gpio); + return -EINVAL; + } + gpio_direction_output(max98373->reset_gpio, 0); + msleep(50); + gpio_direction_output(max98373->reset_gpio, 1); + msleep(20); + } + /* Check Revision ID */ ret = regmap_read(max98373->regmap, MAX98373_R21FF_REV_ID, ®); @@ -944,9 +973,6 @@ static int max98373_i2c_probe(struct i2c_client *i2c, } dev_info(&i2c->dev, "MAX98373 revisionID: 0x%02X\n", reg); - /* voltage/current slot configuration */ - max98373_slot_config(i2c, max98373); - /* codec registeration */ ret = devm_snd_soc_register_component(&i2c->dev, &soc_codec_dev_max98373, max98373_dai, ARRAY_SIZE(max98373_dai)); diff --git a/sound/soc/codecs/max98373.h b/sound/soc/codecs/max98373.h index f6a37aa02f26..533d2053f608 100644 --- a/sound/soc/codecs/max98373.h +++ b/sound/soc/codecs/max98373.h @@ -203,6 +203,7 @@ struct max98373_priv { struct regmap *regmap; + int reset_gpio; unsigned int v_slot; unsigned int i_slot; unsigned int spkfb_slot; -- 2.18.0
next reply other threads:[~2019-07-15 10:11 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-15 9:55 chunguo feng [this message] 2019-07-15 9:55 ` [PATCH] ASoC: max98383: fix i2c probe failure chunguo feng 2019-07-22 12:22 ` Applied "ASoC: max98383: fix i2c probe failure" to the asoc tree Mark Brown 2019-07-22 12:22 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190715095556.1614-1-chunguo.feng@amlogic.com \ --to=chunguo.feng@amlogic.com \ --cc=RyanS.Lee@maximintegrated.com \ --cc=alsa-devel@alsa-project.org \ --cc=bleung@chromium.org \ --cc=broonie@kernel.org \ --cc=grundler@chromium.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=pierre-louis.bossart@linux.intel.com \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.