All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Fomichev <dmitry.fomichev@wdc.com>
To: qemu-devel@nongnu.org, qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v2 2/5] raw: Recognize zoned backing devices
Date: Wed, 17 Jul 2019 17:27:00 -0400	[thread overview]
Message-ID: <20190717212703.10205-3-dmitry.fomichev@wdc.com> (raw)
In-Reply-To: <20190717212703.10205-1-dmitry.fomichev@wdc.com>

The purpose of this patch is to recognize a zoned block device (ZBD)
when it is opened as a raw file. The new code initializes the zoned
model propery introduced by the previous commit.

This commit is Linux-specific as it gets the Zoned Block Device Model
value (none/host-managed/host-aware) from sysfs on the host.

In order to avoid code duplication in file-posix.c, a common helper
function is added to read values of sysfs entries under
/sys/block/<dev>/queue. This way, the existing function that reads
the value of "max_segments" entry and the the new function that reads
"zoned" value both share the same helper code.

Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
---
 block/file-posix.c | 74 ++++++++++++++++++++++++++++++++++++++--------
 block/raw-format.c |  8 +++++
 2 files changed, 70 insertions(+), 12 deletions(-)

diff --git a/block/file-posix.c b/block/file-posix.c
index 4479cc7ab4..e307cab7a4 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -1053,15 +1053,13 @@ static int sg_get_max_transfer_length(int fd)
 #endif
 }
 
-static int sg_get_max_segments(int fd)
+static int hdev_read_blk_queue_entry(int fd, const char *key,
+    char *buf, int buf_len)
 {
 #ifdef CONFIG_LINUX
-    char buf[32];
-    const char *end;
     char *sysfspath = NULL;
     int ret;
     int sysfd = -1;
-    long max_segments;
     struct stat st;
 
     if (fstat(fd, &st)) {
@@ -1069,23 +1067,45 @@ static int sg_get_max_segments(int fd)
         goto out;
     }
 
-    sysfspath = g_strdup_printf("/sys/dev/block/%u:%u/queue/max_segments",
-                                major(st.st_rdev), minor(st.st_rdev));
+    sysfspath = g_strdup_printf("/sys/dev/block/%u:%u/queue/%s",
+                                major(st.st_rdev), minor(st.st_rdev), key);
     sysfd = open(sysfspath, O_RDONLY);
     if (sysfd == -1) {
         ret = -errno;
         goto out;
     }
     do {
-        ret = read(sysfd, buf, sizeof(buf) - 1);
+        ret = read(sysfd, buf, buf_len - 1);
     } while (ret == -1 && errno == EINTR);
     if (ret < 0) {
         ret = -errno;
-        goto out;
     } else if (ret == 0) {
         ret = -EIO;
+    }
+out:
+    if (sysfd != -1) {
+        close(sysfd);
+    }
+    g_free(sysfspath);
+    return ret;
+#else
+    return -ENOTSUP;
+#endif
+}
+
+static int sg_get_max_segments(int fd)
+{
+#ifdef CONFIG_LINUX
+    char buf[32];
+    const char *end;
+    int ret;
+    long max_segments;
+
+    ret = hdev_read_blk_queue_entry(fd, "max_segments", buf, sizeof(buf));
+    if (ret < 0) {
         goto out;
     }
+
     buf[ret] = 0;
     /* The file is ended with '\n', pass 'end' to accept that. */
     ret = qemu_strtol(buf, &end, 10, &max_segments);
@@ -1094,10 +1114,33 @@ static int sg_get_max_segments(int fd)
     }
 
 out:
-    if (sysfd != -1) {
-        close(sysfd);
+    return ret;
+#else
+    return -ENOTSUP;
+#endif
+}
+
+static int hdev_get_zoned_model(int fd)
+{
+#ifdef CONFIG_LINUX
+    char buf[32];
+    int ret;
+
+    ret = hdev_read_blk_queue_entry(fd, "zoned", buf, sizeof(buf));
+    if (ret < 0) {
+        ret = BLK_ZONED_MODEL_NONE;
+        goto out;
     }
-    g_free(sysfspath);
+
+    buf[ret - 1] = 0;
+    ret = BLK_ZONED_MODEL_NONE;
+    if (strcmp(buf, "host-managed") == 0) {
+        ret = BLK_ZONED_MODEL_HM;
+    } else if (strcmp(buf, "host-aware") == 0) {
+        ret = BLK_ZONED_MODEL_HA;
+    }
+
+out:
     return ret;
 #else
     return -ENOTSUP;
@@ -1107,9 +1150,10 @@ out:
 static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
 {
     BDRVRawState *s = bs->opaque;
+    int ret;
 
     if (bs->sg) {
-        int ret = sg_get_max_transfer_length(s->fd);
+        ret = sg_get_max_transfer_length(s->fd);
 
         if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
             bs->bl.max_transfer = pow2floor(ret);
@@ -1119,6 +1163,12 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
         if (ret > 0) {
             bs->bl.max_transfer = MIN(bs->bl.max_transfer, ret * getpagesize());
         }
+
+    }
+
+    ret = hdev_get_zoned_model(s->fd);
+    if (ret >= 0) {
+        bs->bl.zoned_model = ret;
     }
 
     raw_probe_alignment(bs, s->fd, errp);
diff --git a/block/raw-format.c b/block/raw-format.c
index bffd424dd0..12c2a3f95d 100644
--- a/block/raw-format.c
+++ b/block/raw-format.c
@@ -369,6 +369,13 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
     }
 }
 
+static void raw_get_zoned_info(BlockDriverState *bs)
+{
+    if (!bs->probed) {
+        bs->bl.zoned_model = bs->file->bs->bl.zoned_model;
+    }
+}
+
 static int coroutine_fn raw_co_truncate(BlockDriverState *bs, int64_t offset,
                                         PreallocMode prealloc, Error **errp)
 {
@@ -572,6 +579,7 @@ BlockDriver bdrv_raw = {
     .bdrv_co_ioctl        = &raw_co_ioctl,
     .create_opts          = &raw_create_opts,
     .bdrv_has_zero_init   = &raw_has_zero_init,
+    .bdrv_get_zoned_info  = &raw_get_zoned_info,
     .strong_runtime_opts  = raw_strong_runtime_opts,
     .mutable_opts         = mutable_opts,
 };
-- 
2.21.0



  parent reply	other threads:[~2019-07-17 21:27 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17 21:26 [Qemu-devel] [PATCH v2 0/5] virtio/block: handle zoned backing devices Dmitry Fomichev
2019-07-17 21:26 ` [Qemu-devel] [PATCH v2 1/5] block: Add zoned device model property Dmitry Fomichev
2019-07-17 21:27 ` Dmitry Fomichev [this message]
2019-07-17 21:27 ` [Qemu-devel] [PATCH v2 3/5] block/ide/scsi: Set BLK_PERM_SUPPORT_ZONED Dmitry Fomichev
2019-07-18  7:47   ` Paul Durrant
2019-07-17 21:27 ` [Qemu-devel] [PATCH v2 4/5] raw: Don't open ZBDs if backend can't handle them Dmitry Fomichev
2019-07-17 21:27 ` [Qemu-devel] [PATCH v2 5/5] hw/scsi: Check sense key before READ CAPACITY output snoop Dmitry Fomichev
2019-07-18  9:42   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190717212703.10205-3-dmitry.fomichev@wdc.com \
    --to=dmitry.fomichev@wdc.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.