All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: qemu-devel@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>,
	David Gibson <david@gibson.dropbear.id.au>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	David Hildenbrand <david@redhat.com>
Subject: [Qemu-devel] [PATCH v1 2/3] virtio-balloon: Better names for offset variables in inflate/deflate code
Date: Fri, 19 Jul 2019 18:01:19 +0200	[thread overview]
Message-ID: <20190719160120.26581-3-david@redhat.com> (raw)
In-Reply-To: <20190719160120.26581-1-david@redhat.com>

"host_page_base" is really confusing, let's make this clearer, also
rename the other offsets to indicate to which base they apply.

offset -> mr_offset
ram_offset -> rb_offset
host_page_base -> rb_aligned_offset

While at it, use QEMU_ALIGN_DOWN() instead of a handcrafted computation
and move the computation to the place where it is needed.

Signed-off-by: David Hildenbrand <david@redhat.com>
---
 hw/virtio/virtio-balloon.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
index 287d5d4c97..29cee344b2 100644
--- a/hw/virtio/virtio-balloon.c
+++ b/hw/virtio/virtio-balloon.c
@@ -47,24 +47,23 @@ static void virtio_balloon_reset_pbp(VirtIOBalloon *balloon)
 }
 
 static void balloon_inflate_page(VirtIOBalloon *balloon,
-                                 MemoryRegion *mr, hwaddr offset)
+                                 MemoryRegion *mr, hwaddr mr_offset)
 {
-    void *addr = memory_region_get_ram_ptr(mr) + offset;
+    void *addr = memory_region_get_ram_ptr(mr) + mr_offset;
+    ram_addr_t rb_offset, rb_aligned_offset;
     RAMBlock *rb;
     size_t rb_page_size;
     int subpages;
-    ram_addr_t ram_offset, host_page_base;
 
     /* XXX is there a better way to get to the RAMBlock than via a
      * host address? */
-    rb = qemu_ram_block_from_host(addr, false, &ram_offset);
+    rb = qemu_ram_block_from_host(addr, false, &rb_offset);
     rb_page_size = qemu_ram_pagesize(rb);
-    host_page_base = ram_offset & ~(rb_page_size - 1);
 
     if (rb_page_size == BALLOON_PAGE_SIZE) {
         /* Easy case */
 
-        ram_block_discard_range(rb, ram_offset, rb_page_size);
+        ram_block_discard_range(rb, rb_offset, rb_page_size);
         /* We ignore errors from ram_block_discard_range(), because it
          * has already reported them, and failing to discard a balloon
          * page is not fatal */
@@ -80,11 +79,12 @@ static void balloon_inflate_page(VirtIOBalloon *balloon,
     warn_report_once(
 "Balloon used with backing page size > 4kiB, this may not be reliable");
 
+    rb_aligned_offset = QEMU_ALIGN_DOWN(rb_offset, rb_page_size);
     subpages = rb_page_size / BALLOON_PAGE_SIZE;
 
     if (balloon->pbp
         && (rb != balloon->pbp->rb
-            || host_page_base != balloon->pbp->base)) {
+            || rb_aligned_offset != balloon->pbp->base)) {
         /* We've partially ballooned part of a host page, but now
          * we're trying to balloon part of a different one.  Too hard,
          * give up on the old partial page */
@@ -96,10 +96,10 @@ static void balloon_inflate_page(VirtIOBalloon *balloon,
         size_t bitlen = BITS_TO_LONGS(subpages) * sizeof(unsigned long);
         balloon->pbp = g_malloc0(sizeof(PartiallyBalloonedPage) + bitlen);
         balloon->pbp->rb = rb;
-        balloon->pbp->base = host_page_base;
+        balloon->pbp->base = rb_aligned_offset;
     }
 
-    set_bit((ram_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE,
+    set_bit((rb_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE,
             balloon->pbp->bitmap);
 
     if (bitmap_full(balloon->pbp->bitmap, subpages)) {
@@ -116,18 +116,18 @@ static void balloon_inflate_page(VirtIOBalloon *balloon,
 }
 
 static void balloon_deflate_page(VirtIOBalloon *balloon,
-                                 MemoryRegion *mr, hwaddr offset)
+                                 MemoryRegion *mr, hwaddr mr_offset)
 {
-    void *addr = memory_region_get_ram_ptr(mr) + offset;
+    void *addr = memory_region_get_ram_ptr(mr) + mr_offset;
+    ram_addr_t rb_offset;
     RAMBlock *rb;
     size_t rb_page_size;
-    ram_addr_t ram_offset;
     void *host_addr;
     int ret;
 
     /* XXX is there a better way to get to the RAMBlock than via a
      * host address? */
-    rb = qemu_ram_block_from_host(addr, false, &ram_offset);
+    rb = qemu_ram_block_from_host(addr, false, &rb_offset);
     rb_page_size = qemu_ram_pagesize(rb);
 
     if (balloon->pbp) {
-- 
2.21.0



  parent reply	other threads:[~2019-07-19 16:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-19 16:01 [Qemu-devel] [PATCH v1 0/3] virtio-balloon: PartialBalloonedPage rework David Hildenbrand
2019-07-19 16:01 ` [Qemu-devel] [PATCH v1 1/3] virtio-balloon: simplify deflate with pbp David Hildenbrand
2019-07-22  2:27   ` David Gibson
2019-07-19 16:01 ` David Hildenbrand [this message]
2019-07-22  2:29   ` [Qemu-devel] [PATCH v1 2/3] virtio-balloon: Better names for offset variables in inflate/deflate code David Gibson
2019-07-19 16:01 ` [Qemu-devel] [PATCH v1 3/3] virtio-balloon: Rework pbp tracking data David Hildenbrand
2019-07-22  3:04   ` David Gibson
2019-07-22  7:43     ` David Hildenbrand
2019-07-22  8:14       ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190719160120.26581-3-david@redhat.com \
    --to=david@redhat.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=imammedo@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.