All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Daniel Drake <drake@endlessm.com>,
	Hui Wang <hui.wang@canonical.com>,
	Curtis Malainey <cujomalainey@google.com>,
	broonie@kernel.org
Subject: [PATCH v2 5/5] ALSA: hda/intel: stop probe if DMICS are detected on Skylake+ platforms
Date: Fri, 19 Jul 2019 15:37:52 -0500	[thread overview]
Message-ID: <20190719203752.11151-6-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20190719203752.11151-1-pierre-louis.bossart@linux.intel.com>

The legacy HD-Audio driver cannot handle Skylake+ platforms with
digital microphones. For those platforms, the SOF or SST drivers need
to be used.

This patch provides an automatic way of detecting the presence of
DMICs using NHTL information reported by the BIOS. A kernel kconfig
option or a kernel module parameter provide an opt-in means of
stopping the probe. The kernel would then look for an alternate driver
registered for the same PCI ID to probe.

With this capability, distros no longer have to blacklist
snd-hda-intel, but still need to make sure the SOF/SST drivers are
functional by providing the relevant firmware and topology files in
/lib/firmware/intel

The coexistence between SOF and SST drivers and their dynamic
detection is not addressed by this patch, different mechanisms need to
be used, e.g. DMI-based quirks.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/pci/hda/Kconfig     | 10 ++++++++++
 sound/pci/hda/hda_intel.c | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 35d934309cb2..b5966014b5f7 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -12,6 +12,7 @@ config SND_HDA_INTEL
 	tristate "HD Audio PCI"
 	depends on SND_PCI
 	select SND_HDA
+	select SND_INTEL_NHLT if ACPI
 	help
 	  Say Y here to include support for Intel "High Definition
 	  Audio" (Azalia) and its compatible devices.
@@ -22,6 +23,15 @@ config SND_HDA_INTEL
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-hda-intel.
 
+config SND_HDA_INTEL_DETECT_DMIC
+	bool "DMIC detection and probe abort"
+	depends on SND_HDA_INTEL
+	help
+	  Say Y to detect digital microphones on SKL+ devices. DMICs
+	  cannot be handled by the HDaudio legacy driver and are
+	  currently only supported by the SOF driver.
+	  If unsure say N.
+
 config SND_HDA_TEGRA
 	tristate "NVIDIA Tegra HD Audio"
 	depends on ARCH_TEGRA
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index cb8b0945547c..ae9c13248a1d 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -46,6 +46,7 @@
 #include <sound/initval.h>
 #include <sound/hdaudio.h>
 #include <sound/hda_i915.h>
+#include <sound/intel-nhlt.h>
 #include <linux/vgaarb.h>
 #include <linux/vga_switcheroo.h>
 #include <linux/firmware.h>
@@ -124,6 +125,7 @@ static char *patch[SNDRV_CARDS];
 static bool beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] =
 					CONFIG_SND_HDA_INPUT_BEEP_MODE};
 #endif
+static bool dmic_detect = IS_ENABLED(CONFIG_SND_HDA_INTEL_DETECT_DMIC);
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
@@ -158,6 +160,8 @@ module_param_array(beep_mode, bool, NULL, 0444);
 MODULE_PARM_DESC(beep_mode, "Select HDA Beep registration mode "
 			    "(0=off, 1=on) (default=1).");
 #endif
+module_param(dmic_detect, bool, 0444);
+MODULE_PARM_DESC(dmic_detect, "DMIC detect on SKL+ platforms");
 
 #ifdef CONFIG_PM
 static int param_set_xint(const char *val, const struct kernel_param *kp);
@@ -2025,6 +2029,25 @@ static const struct hda_controller_ops pci_hda_ops = {
 	.position_check = azx_position_check,
 };
 
+static int azx_check_dmic(struct pci_dev *pci, struct azx *chip)
+{
+	struct nhlt_acpi_table *nhlt;
+	int ret = 0;
+
+	if (chip->driver_type == AZX_DRIVER_SKL &&
+	    pci->class != 0x040300) {
+		nhlt = intel_nhlt_init(&pci->dev);
+		if (nhlt) {
+			if (intel_nhlt_get_dmic_geo(&pci->dev, nhlt)) {
+				ret = -ENODEV;
+				dev_info(&pci->dev, "Digital mics found on Skylake+ platform, aborting probe\n");
+			}
+			intel_nhlt_free(nhlt);
+		}
+	}
+	return ret;
+}
+
 static int azx_probe(struct pci_dev *pci,
 		     const struct pci_device_id *pci_id)
 {
@@ -2055,6 +2078,17 @@ static int azx_probe(struct pci_dev *pci,
 	card->private_data = chip;
 	hda = container_of(chip, struct hda_intel, chip);
 
+	/*
+	 * stop probe if digital microphones detected on Skylake+ platform
+	 * with the DSP enabled. This is an opt-in behavior defined at build
+	 * time or at run-time with a module parameter
+	 */
+	if (dmic_detect) {
+		err = azx_check_dmic(pci, chip);
+		if (err < 0)
+			goto out_free;
+	}
+
 	pci_set_drvdata(pci, card);
 
 	err = register_vga_switcheroo(chip);
-- 
2.20.1

      parent reply	other threads:[~2019-07-19 20:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-19 20:37 [PATCH v2 0/5] ALSA/HDA: abort probe when DMICs are detected Pierre-Louis Bossart
2019-07-19 20:37 ` [PATCH v2 1/5] ASoC: Intel: Skylake: move NHLT header to common directory Pierre-Louis Bossart
2019-07-19 20:37 ` [PATCH v2 2/5] ALSA: hda: move parts of NHLT code to new module Pierre-Louis Bossart
2019-07-20 21:06   ` Cezary Rojewski
2019-07-22  8:54     ` Takashi Iwai
2019-07-22 12:14       ` Pierre-Louis Bossart
2019-07-22 12:26         ` Takashi Iwai
2019-07-22 12:58           ` Pierre-Louis Bossart
2019-07-22 13:01             ` Takashi Iwai
2019-07-22 13:17               ` Pierre-Louis Bossart
2019-07-26 22:09     ` Pierre-Louis Bossart
2019-07-19 20:37 ` [PATCH v2 3/5] ALSA: hda: intel-nhlt: handle NHLT VENDOR_DEFINED DMIC geometry Pierre-Louis Bossart
2019-07-19 20:37 ` [PATCH v2 4/5] ASoC: Intel: Skylake: use common NHLT module Pierre-Louis Bossart
2019-07-19 20:37 ` Pierre-Louis Bossart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190719203752.11151-6-pierre-louis.bossart@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=cujomalainey@google.com \
    --cc=drake@endlessm.com \
    --cc=hui.wang@canonical.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.