All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Lechner <david@lechnology.com>
To: linux-iio@vger.kernel.org, linux-omap@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: "David Lechner" <david@lechnology.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"William Breathitt Gray" <vilhelm.gray@gmail.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org
Subject: [PATCH 2/4] counter: new TI eQEP driver
Date: Mon, 22 Jul 2019 10:45:36 -0500	[thread overview]
Message-ID: <20190722154538.5314-3-david@lechnology.com> (raw)
In-Reply-To: <20190722154538.5314-1-david@lechnology.com>

This adds a new counter driver for the Texas Instruments Enhanced
Quadrature Encoder Pulse (eQEP) module.

Only very basic functionality is currently implemented - only enough to
be able to read the position. The actual device has many more features
which can be added to the driver on an as-needed basis.

Signed-off-by: David Lechner <david@lechnology.com>
---
 MAINTAINERS               |   6 +
 drivers/counter/Kconfig   |  12 ++
 drivers/counter/Makefile  |   1 +
 drivers/counter/ti-eqep.c | 381 ++++++++++++++++++++++++++++++++++++++
 drivers/pwm/Kconfig       |   2 +-
 5 files changed, 401 insertions(+), 1 deletion(-)
 create mode 100644 drivers/counter/ti-eqep.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e3c4b4..f3b5e275732b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16014,6 +16014,12 @@ S:	Maintained
 F:	drivers/media/platform/davinci/
 F:	include/media/davinci/
 
+TI ENHANCED QUADRATURE ENCODER PULSE (eQEP) DRIVER
+R:	David Lechner <david@lechnology.com>
+L:	linux-iio@vger.kernel.org
+F:	Documentation/devicetree/bindings/counter/ti-eqep.txt
+F:	drivers/counter/ti-eqep.c
+
 TI ETHERNET SWITCH DRIVER (CPSW)
 R:	Grygorii Strashko <grygorii.strashko@ti.com>
 L:	linux-omap@vger.kernel.org
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 2967d0a9ff91..7eeb310f0cda 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -49,6 +49,18 @@ config STM32_LPTIMER_CNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called stm32-lptimer-cnt.
 
+config TI_EQEP
+	tristate "TI eQEP counter driver"
+	depends on (SOC_AM33XX || COMPILE_TEST)
+	select PWM
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the Texas Instruments Enhanced Quadrature
+	  Encoder Pulse (eQEP) counter driver.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ti-eqep.
+
 config FTM_QUADDEC
 	tristate "Flex Timer Module Quadrature decoder driver"
 	depends on HAS_IOMEM && OF
diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
index 40d35522937d..55142d1f4c43 100644
--- a/drivers/counter/Makefile
+++ b/drivers/counter/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_COUNTER) += counter.o
 obj-$(CONFIG_104_QUAD_8)	+= 104-quad-8.o
 obj-$(CONFIG_STM32_TIMER_CNT)	+= stm32-timer-cnt.o
 obj-$(CONFIG_STM32_LPTIMER_CNT)	+= stm32-lptimer-cnt.o
+obj-$(CONFIG_TI_EQEP)		+= ti-eqep.o
 obj-$(CONFIG_FTM_QUADDEC)	+= ftm-quaddec.o
diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
new file mode 100644
index 000000000000..7aaa4abbc9c5
--- /dev/null
+++ b/drivers/counter/ti-eqep.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 David Lechner <david@lechnology.com>
+ *
+ * Counter driver for Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP)
+ */
+
+#include <linux/bitops.h>
+#include <linux/counter.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+/* 32-bit registers */
+#define QPOSCNT		0x0
+#define QPOSINIT	0x4
+#define QPOSMAX		0x8
+#define QPOSCMP		0xc
+#define QPOSILAT	0x10
+#define QPOSSLAT	0x14
+#define QPOSLAT		0x18
+#define QUTMR		0x1c
+#define QUPRD		0x20
+
+/* 16-bit registers */
+#define QWDTMR		0x0	/* 0x24 */
+#define QWDPRD		0x2	/* 0x26 */
+#define QDECCTL		0x4	/* 0x28 */
+#define QEPCTL		0x6	/* 0x2a */
+#define QCAPCTL		0x8	/* 0x2c */
+#define QPOSCTL		0xa	/* 0x2e */
+#define QEINT		0xc	/* 0x30 */
+#define QFLG		0xe	/* 0x32 */
+#define QCLR		0x10	/* 0x34 */
+#define QFRC		0x12	/* 0x36 */
+#define QEPSTS		0x14	/* 0x38 */
+#define QCTMR		0x16	/* 0x3a */
+#define QCPRD		0x18	/* 0x3c */
+#define QCTMRLAT	0x1a	/* 0x3e */
+#define QCPRDLAT	0x1c	/* 0x40 */
+
+#define QDECCTL_QSRC_SHIFT	14
+#define QDECCTL_QSRC		GENMASK(15, 14)
+#define QDECCTL_SOEN		BIT(13)
+#define QDECCTL_SPSEL		BIT(12)
+#define QDECCTL_XCR		BIT(11)
+#define QDECCTL_SWAP		BIT(10)
+#define QDECCTL_IGATE		BIT(9)
+#define QDECCTL_QAP		BIT(8)
+#define QDECCTL_QBP		BIT(7)
+#define QDECCTL_QIP		BIT(6)
+#define QDECCTL_QSP		BIT(5)
+
+#define QEPCTL_FREE_SOFT	GENMASK(15, 14)
+#define QEPCTL_PCRM		GENMASK(13, 12)
+#define QEPCTL_SEI		GENMASK(11, 10)
+#define QEPCTL_IEI		GENMASK(9, 8)
+#define QEPCTL_SWI		BIT(7)
+#define QEPCTL_SEL		BIT(6)
+#define QEPCTL_IEL		GENMASK(5, 4)
+#define QEPCTL_PHEN		BIT(3)
+#define QEPCTL_QCLM		BIT(2)
+#define QEPCTL_UTE		BIT(1)
+#define QEPCTL_WDE		BIT(0)
+
+/* EQEP Inputs */
+enum {
+	TI_EQEP_SIGNAL_QEPA,	/* QEPA/XCLK */
+	TI_EQEP_SIGNAL_QEPB,	/* QEPB/XDIR */
+	TI_EQEP_SIGNAL_QEPI,	/* Index */
+	TI_EQEP_SIGNAL_QEPS,	/* Strobe */
+};
+
+/* Position Counter Input Modes */
+enum {
+	TI_EQEP_COUNT_FUNC_QUAD_COUNT,
+	TI_EQEP_COUNT_FUNC_DIR_COUNT,
+	TI_EQEP_COUNT_FUNC_UP_COUNT,
+	TI_EQEP_COUNT_FUNC_DOWN_COUNT,
+};
+
+struct ti_eqep_cnt {
+	struct counter_device counter;
+	struct regmap *regmap32;
+	struct regmap *regmap16;
+};
+
+static int ti_eqep_count_read(struct counter_device *counter,
+			      struct counter_count *count,
+			      struct counter_count_read_value *val)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 cnt;
+
+	regmap_read(priv->regmap32, QPOSCNT, &cnt);
+	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
+
+	return 0;
+}
+
+static int ti_eqep_count_write(struct counter_device *counter,
+			       struct counter_count *count,
+			       struct counter_count_write_value *val)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 cnt, max;
+	int err;
+
+	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
+	if (err)
+		return err;
+
+	regmap_read(priv->regmap32, QPOSMAX, &max);
+	if (cnt > max)
+		return -EINVAL;
+
+	return regmap_write(priv->regmap32, QPOSCNT, cnt);
+}
+
+static int ti_eqep_function_get(struct counter_device *counter,
+				struct counter_count *count, size_t *function)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qdecctl;
+
+	regmap_read(priv->regmap16, QDECCTL, &qdecctl);
+	*function = (qdecctl & QDECCTL_QSRC) >> QDECCTL_QSRC_SHIFT;
+
+	return 0;
+}
+
+static int ti_eqep_function_set(struct counter_device *counter,
+				struct counter_count *count, size_t function)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+
+	return regmap_write_bits(priv->regmap16, QDECCTL, QDECCTL_QSRC,
+				 function << QDECCTL_QSRC_SHIFT);
+}
+
+static ssize_t ti_eqep_position_ceiling_read(struct counter_device *counter,
+					     struct counter_count *count,
+					     void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qposmax;
+
+	regmap_read(priv->regmap32, QPOSMAX, &qposmax);
+
+	return sprintf(buf, "%u\n", qposmax);
+}
+
+static ssize_t ti_eqep_position_ceiling_write(struct counter_device *counter,
+					      struct counter_count *count,
+					      void *ext_priv, const char *buf,
+					      size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	u32 res;
+
+	err = kstrtouint(buf, 10, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write(priv->regmap32, QPOSMAX, res);
+
+	return len;
+}
+
+static ssize_t ti_eqep_position_floor_read(struct counter_device *counter,
+					   struct counter_count *count,
+					   void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qposinit;
+
+	regmap_read(priv->regmap32, QPOSINIT, &qposinit);
+
+	return sprintf(buf, "%u\n", qposinit);
+}
+
+static ssize_t ti_eqep_position_floor_write(struct counter_device *counter,
+					    struct counter_count *count,
+					    void *ext_priv, const char *buf,
+					    size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	u32 res;
+
+	err = kstrtouint(buf, 10, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write(priv->regmap32, QPOSINIT, res);
+
+	return len;
+}
+
+static ssize_t ti_eqep_position_enable_read(struct counter_device *counter,
+					    struct counter_count *count,
+					    void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qepctl;
+
+	regmap_read(priv->regmap16, QEPCTL, &qepctl);
+
+	return sprintf(buf, "%u\n", !!(qepctl & QEPCTL_PHEN));
+}
+
+static ssize_t ti_eqep_position_enable_write(struct counter_device *counter,
+					     struct counter_count *count,
+					     void *ext_priv, const char *buf,
+					     size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	bool res;
+
+	err = kstrtobool(buf, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write_bits(priv->regmap16, QEPCTL, QEPCTL_PHEN, res ? -1 : 0);
+
+	return len;
+}
+
+static const struct regmap_config ti_eqep_regmap32_config = {
+	.name = "32-bit",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x24,
+};
+
+static const struct regmap_config ti_eqep_regmap16_config = {
+	.name = "16-bit",
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_stride = 2,
+	.max_register = 0x1e,
+};
+
+static const struct counter_ops ti_eqep_counter_ops = {
+	.count_read	= ti_eqep_count_read,
+	.count_write	= ti_eqep_count_write,
+	.function_get	= ti_eqep_function_get,
+	.function_set	= ti_eqep_function_set,
+};
+
+static const enum counter_count_function ti_eqep_position_functions[] = {
+	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
+	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_COUNT_FUNCTION_INCREASE,
+	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_COUNT_FUNCTION_DECREASE,
+};
+
+static struct counter_signal ti_eqep_signals[] = {
+	[TI_EQEP_SIGNAL_QEPA] = {
+		.id = TI_EQEP_SIGNAL_QEPA,
+		.name = "QEPA"
+	},
+	[TI_EQEP_SIGNAL_QEPB] = {
+		.id = TI_EQEP_SIGNAL_QEPB,
+		.name = "QEPB"
+	},
+	[TI_EQEP_SIGNAL_QEPI] = {
+		.id = TI_EQEP_SIGNAL_QEPI,
+		.name = "QEPI"
+	},
+	[TI_EQEP_SIGNAL_QEPS] = {
+		.id = TI_EQEP_SIGNAL_QEPS,
+		.name = "QEPS"
+	},
+};
+
+static struct counter_count_ext ti_eqep_position_ext[] = {
+	{
+		.name	= "ceiling",
+		.read	= ti_eqep_position_ceiling_read,
+		.write	= ti_eqep_position_ceiling_write,
+	},
+	{
+		.name	= "floor",
+		.read	= ti_eqep_position_floor_read,
+		.write	= ti_eqep_position_floor_write,
+	},
+	{
+		.name	= "enable",
+		.read	= ti_eqep_position_enable_read,
+		.write	= ti_eqep_position_enable_write,
+	},
+};
+
+static struct counter_count ti_eqep_counts[] = {
+	{
+		.id		= 0,
+		.name		= "QPOSCNT",
+		.functions_list	= ti_eqep_position_functions,
+		.num_functions	= ARRAY_SIZE(ti_eqep_position_functions),
+		.ext		= ti_eqep_position_ext,
+		.num_ext	= ARRAY_SIZE(ti_eqep_position_ext),
+	},
+};
+
+static int ti_eqep_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ti_eqep_cnt *priv;
+	struct resource *res;
+	void __iomem *base;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap32 = devm_regmap_init_mmio(dev, base,
+					       &ti_eqep_regmap32_config);
+	if (IS_ERR(priv->regmap32))
+		return PTR_ERR(priv->regmap32);
+
+	priv->regmap16 = devm_regmap_init_mmio(dev, base + 0x24,
+					       &ti_eqep_regmap16_config);
+	if (IS_ERR(priv->regmap16))
+		return PTR_ERR(priv->regmap16);
+
+	priv->counter.name = dev_name(dev);
+	priv->counter.parent = dev;
+	priv->counter.ops = &ti_eqep_counter_ops;
+	priv->counter.counts = ti_eqep_counts;
+	priv->counter.num_counts = ARRAY_SIZE(ti_eqep_counts);
+	priv->counter.signals = ti_eqep_signals;
+	priv->counter.num_signals = ARRAY_SIZE(ti_eqep_signals);
+	priv->counter.priv = priv;
+
+	pm_runtime_enable(dev);
+	pm_runtime_get(dev);
+
+	return devm_counter_register(dev, &priv->counter);
+}
+
+static int ti_eqep_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	pm_runtime_put(dev),
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static const struct of_device_id ti_eqep_of_match[] = {
+	{ .compatible = "ti,am3352-eqep", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ti_eqep_of_match);
+
+static struct platform_driver ti_eqep_driver = {
+	.probe = ti_eqep_probe,
+	.remove = ti_eqep_remove,
+	.driver = {
+		.name = "ti-eqep-cnt",
+		.of_match_table = ti_eqep_of_match,
+	},
+};
+module_platform_driver(ti_eqep_driver);
+
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("TI eQEP counter driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index a7e57516959e..ddcbb8573894 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -499,7 +499,7 @@ config  PWM_TIEHRPWM
 
 config  PWM_TIPWMSS
 	bool
-	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
+	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM || TI_EQEP)
 	help
 	  PWM Subsystem driver support for AM33xx SOC.
 
-- 
2.17.1


  parent reply	other threads:[~2019-07-22 15:46 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22 15:45 [PATCH 0/4] new driver for TI eQEP David Lechner
2019-07-22 15:45 ` [PATCH 1/4] dt-bindings: counter: new bindings " David Lechner
2019-07-27 19:48   ` Jonathan Cameron
2019-08-02  7:25     ` William Breathitt Gray
2019-08-02 13:34       ` Rob Herring
2019-08-02 13:58         ` William Breathitt Gray
2019-07-22 15:45 ` David Lechner [this message]
2019-07-30 12:35   ` [PATCH 2/4] counter: new TI eQEP driver Uwe Kleine-König
2019-07-30 15:28     ` David Lechner
2019-08-02  9:27   ` William Breathitt Gray
2019-08-02 16:09     ` David Lechner
2019-08-02 16:17     ` David Lechner
2019-08-02 16:40       ` William Breathitt Gray
2019-07-22 15:45 ` [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP David Lechner
2019-07-23  8:42   ` Tony Lindgren
2019-07-23 14:45     ` David Lechner
2019-07-23 14:51       ` Tony Lindgren
2019-07-22 15:45 ` [PATCH 4/4] ARM: dts: am335x-boneblue: Enable eQEP David Lechner
2019-07-25 12:40 ` [PATCH 0/4] new driver for TI eQEP William Breathitt Gray
2019-07-25 22:52   ` David Lechner
2019-07-27 19:45     ` Jonathan Cameron
2019-07-30  4:45     ` William Breathitt Gray
2019-08-01 17:37       ` David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190722154538.5314-3-david@lechnology.com \
    --to=david@lechnology.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=tony@atomide.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.