From: Jerome Brunet <jbrunet@baylibre.com> To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com>, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org Subject: [PATCH v2 2/6] ASoC: codec2codec: name link using stream direction Date: Thu, 25 Jul 2019 18:59:45 +0200 [thread overview] Message-ID: <20190725165949.29699-3-jbrunet@baylibre.com> (raw) In-Reply-To: <20190725165949.29699-1-jbrunet@baylibre.com> At the moment, codec to codec dai link widgets are named after the cpu dai and the 1st codec valid on the link. This might be confusing if there is multiple valid codecs on the link for one stream direction. Instead, use the dai link name and the stream direction to name the the dai link widget Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/soc/soc-dapm.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 034b31fd2ecb..7db4abd9a0a5 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -4056,8 +4056,7 @@ snd_soc_dapm_alloc_kcontrol(struct snd_soc_card *card, static struct snd_soc_dapm_widget * snd_soc_dapm_new_dai(struct snd_soc_card *card, struct snd_soc_pcm_runtime *rtd, - struct snd_soc_dapm_widget *source, - struct snd_soc_dapm_widget *sink) + char *id) { struct snd_soc_dapm_widget template; struct snd_soc_dapm_widget *w; @@ -4067,7 +4066,7 @@ snd_soc_dapm_new_dai(struct snd_soc_card *card, struct snd_soc_pcm_runtime *rtd, int ret; link_name = devm_kasprintf(card->dev, GFP_KERNEL, "%s-%s", - source->name, sink->name); + rtd->dai_link->name, id); if (!link_name) return ERR_PTR(-ENOMEM); @@ -4247,15 +4246,13 @@ static void dapm_connect_dai_link_widgets(struct snd_soc_card *card, } for_each_rtd_codec_dai(rtd, i, codec_dai) { - /* connect BE DAI playback if widgets are valid */ codec = codec_dai->playback_widget; if (playback_cpu && codec) { if (!playback) { playback = snd_soc_dapm_new_dai(card, rtd, - playback_cpu, - codec); + "playback"); if (IS_ERR(playback)) { dev_err(rtd->dev, "ASoC: Failed to create DAI %s: %ld\n", @@ -4284,8 +4281,7 @@ static void dapm_connect_dai_link_widgets(struct snd_soc_card *card, if (codec && capture_cpu) { if (!capture) { capture = snd_soc_dapm_new_dai(card, rtd, - codec, - capture_cpu); + "capture"); if (IS_ERR(capture)) { dev_err(rtd->dev, "ASoC: Failed to create DAI %s: %ld\n", -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com> To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Kevin Hilman <khilman@baylibre.com> Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, Jerome Brunet <jbrunet@baylibre.com> Subject: [PATCH v2 2/6] ASoC: codec2codec: name link using stream direction Date: Thu, 25 Jul 2019 18:59:45 +0200 [thread overview] Message-ID: <20190725165949.29699-3-jbrunet@baylibre.com> (raw) In-Reply-To: <20190725165949.29699-1-jbrunet@baylibre.com> At the moment, codec to codec dai link widgets are named after the cpu dai and the 1st codec valid on the link. This might be confusing if there is multiple valid codecs on the link for one stream direction. Instead, use the dai link name and the stream direction to name the the dai link widget Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/soc/soc-dapm.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 034b31fd2ecb..7db4abd9a0a5 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -4056,8 +4056,7 @@ snd_soc_dapm_alloc_kcontrol(struct snd_soc_card *card, static struct snd_soc_dapm_widget * snd_soc_dapm_new_dai(struct snd_soc_card *card, struct snd_soc_pcm_runtime *rtd, - struct snd_soc_dapm_widget *source, - struct snd_soc_dapm_widget *sink) + char *id) { struct snd_soc_dapm_widget template; struct snd_soc_dapm_widget *w; @@ -4067,7 +4066,7 @@ snd_soc_dapm_new_dai(struct snd_soc_card *card, struct snd_soc_pcm_runtime *rtd, int ret; link_name = devm_kasprintf(card->dev, GFP_KERNEL, "%s-%s", - source->name, sink->name); + rtd->dai_link->name, id); if (!link_name) return ERR_PTR(-ENOMEM); @@ -4247,15 +4246,13 @@ static void dapm_connect_dai_link_widgets(struct snd_soc_card *card, } for_each_rtd_codec_dai(rtd, i, codec_dai) { - /* connect BE DAI playback if widgets are valid */ codec = codec_dai->playback_widget; if (playback_cpu && codec) { if (!playback) { playback = snd_soc_dapm_new_dai(card, rtd, - playback_cpu, - codec); + "playback"); if (IS_ERR(playback)) { dev_err(rtd->dev, "ASoC: Failed to create DAI %s: %ld\n", @@ -4284,8 +4281,7 @@ static void dapm_connect_dai_link_widgets(struct snd_soc_card *card, if (codec && capture_cpu) { if (!capture) { capture = snd_soc_dapm_new_dai(card, rtd, - codec, - capture_cpu); + "capture"); if (IS_ERR(capture)) { dev_err(rtd->dev, "ASoC: Failed to create DAI %s: %ld\n", -- 2.21.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-07-25 17:00 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-25 16:59 [PATCH v2 0/6] ASoC: improve codec to codec link support Jerome Brunet 2019-07-25 16:59 ` Jerome Brunet 2019-07-25 16:59 ` [PATCH v2 1/6] ASoC: codec2codec: run callbacks in order Jerome Brunet 2019-07-25 16:59 ` Jerome Brunet 2019-07-25 17:43 ` Applied "ASoC: codec2codec: run callbacks in order" to the asoc tree Mark Brown 2019-07-25 17:43 ` Mark Brown 2019-07-25 17:43 ` Mark Brown 2019-07-25 16:59 ` Jerome Brunet [this message] 2019-07-25 16:59 ` [PATCH v2 2/6] ASoC: codec2codec: name link using stream direction Jerome Brunet 2019-07-25 17:43 ` Applied "ASoC: codec2codec: name link using stream direction" to the asoc tree Mark Brown 2019-07-25 17:43 ` Mark Brown 2019-07-25 17:43 ` Mark Brown 2019-07-25 16:59 ` [PATCH v2 3/6] ASoC: codec2codec: deal with params when necessary Jerome Brunet 2019-07-25 16:59 ` Jerome Brunet 2019-07-25 17:43 ` Applied "ASoC: codec2codec: deal with params when necessary" to the asoc tree Mark Brown 2019-07-25 17:43 ` Mark Brown 2019-07-25 17:43 ` Mark Brown 2019-07-25 16:59 ` [PATCH v2 4/6] ASoC: create pcm for codec2codec links as well Jerome Brunet 2019-07-25 16:59 ` Jerome Brunet 2019-08-01 13:10 ` Applied "ASoC: create pcm for codec2codec links as well" to the asoc tree Mark Brown 2019-08-01 13:10 ` Mark Brown 2019-08-01 13:10 ` Mark Brown 2019-07-25 16:59 ` [PATCH v2 5/6] ASoC: codec2codec: remove ephemeral variables Jerome Brunet 2019-07-25 16:59 ` Jerome Brunet 2019-08-01 13:10 ` Applied "ASoC: codec2codec: remove ephemeral variables" to the asoc tree Mark Brown 2019-08-01 13:10 ` Mark Brown 2019-08-01 13:10 ` Mark Brown 2019-07-25 16:59 ` [PATCH v2 6/6] ASoC: codec2codec: fill some of the runtime stream parameters Jerome Brunet 2019-07-25 16:59 ` Jerome Brunet 2019-08-01 13:10 ` Applied "ASoC: codec2codec: fill some of the runtime stream parameters" to the asoc tree Mark Brown 2019-08-01 13:10 ` Mark Brown 2019-08-01 13:10 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190725165949.29699-3-jbrunet@baylibre.com \ --to=jbrunet@baylibre.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=khilman@baylibre.com \ --cc=lgirdwood@gmail.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.