From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
stefan@agner.ch, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
Fabio Estevam <festevam@gmail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH 00/22] This patchset holds some common changes that were never upstreamed.
Date: Tue, 30 Jul 2019 16:46:27 +0200 [thread overview]
Message-ID: <20190730144649.19022-1-dev@pschenker.ch> (raw)
From: Philippe Schenker <philippe.schenker@toradex.com>
With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.
These patches I send here are separated out with changes that also
have a benfit for mainline.
Philippe
Marcel Ziswiler (1):
ARM: dts: imx7-colibri: make sure module supplies are always on
Max Krummenacher (2):
ARM: dts: imx6ull-colibri: reduce v_batt current in power off
ARM: dts: imx6ull: improve can templates
Oleksandr Suvorov (1):
ARM: dts: add recovery for I2C for iMX7
Philippe Schenker (15):
ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
ARM: dts: imx7-colibri: Add sleep mode to ethernet
ARM: dts: imx7-colibri: Add touch controllers
ARM: dts: imx6qdl-colibri: add phy to fec
ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
ARM: dts: imx6: Add sleep state to can interfaces
ARM: dts: imx6: Add touchscreens used on Toradex eval boards
ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board
ARM: dts: apalis-imx6: Add some example I2C devices
ARM: dts: apalis-imx6: Add some optional I2C devices
ARM: dts: imx6ull-colibri: Add sleep mode to fec
ARM: dts: imx6ull-colibri: Add watchdog
ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
ARM: dts: imx6/7-colibri: switch dr_mode to otg
ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board
Stefan Agner (3):
ARM: dts: imx7-colibri: disable HS400
ARM: dts: imx7-colibri: add GPIO wakeup key
ARM: dts: imx7-colibri: fix 1.8V/UHS support
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 52 ++++++++
arch/arm/boot/dts/imx6q-apalis-eval.dts | 122 ++++++++++++++++++
arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts | 19 +++
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 19 +++
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 27 +++-
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 27 +++-
.../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 63 +++++++++
.../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri.dtsi | 52 +++++++-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 51 ++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 114 ++++++++++++++--
12 files changed, 524 insertions(+), 26 deletions(-)
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
stefan@agner.ch, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org,
Philippe Schenker <philippe.schenker@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/22] This patchset holds some common changes that were never upstreamed.
Date: Tue, 30 Jul 2019 16:46:27 +0200 [thread overview]
Message-ID: <20190730144649.19022-1-dev@pschenker.ch> (raw)
From: Philippe Schenker <philippe.schenker@toradex.com>
With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.
These patches I send here are separated out with changes that also
have a benfit for mainline.
Philippe
Marcel Ziswiler (1):
ARM: dts: imx7-colibri: make sure module supplies are always on
Max Krummenacher (2):
ARM: dts: imx6ull-colibri: reduce v_batt current in power off
ARM: dts: imx6ull: improve can templates
Oleksandr Suvorov (1):
ARM: dts: add recovery for I2C for iMX7
Philippe Schenker (15):
ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
ARM: dts: imx7-colibri: Add sleep mode to ethernet
ARM: dts: imx7-colibri: Add touch controllers
ARM: dts: imx6qdl-colibri: add phy to fec
ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
ARM: dts: imx6: Add sleep state to can interfaces
ARM: dts: imx6: Add touchscreens used on Toradex eval boards
ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board
ARM: dts: apalis-imx6: Add some example I2C devices
ARM: dts: apalis-imx6: Add some optional I2C devices
ARM: dts: imx6ull-colibri: Add sleep mode to fec
ARM: dts: imx6ull-colibri: Add watchdog
ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
ARM: dts: imx6/7-colibri: switch dr_mode to otg
ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board
Stefan Agner (3):
ARM: dts: imx7-colibri: disable HS400
ARM: dts: imx7-colibri: add GPIO wakeup key
ARM: dts: imx7-colibri: fix 1.8V/UHS support
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 52 ++++++++
arch/arm/boot/dts/imx6q-apalis-eval.dts | 122 ++++++++++++++++++
arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts | 19 +++
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 19 +++
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 27 +++-
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 27 +++-
.../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 63 +++++++++
.../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri.dtsi | 52 +++++++-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 51 ++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 114 ++++++++++++++--
12 files changed, 524 insertions(+), 26 deletions(-)
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
stefan@agner.ch, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org,
Philippe Schenker <philippe.schenker@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/22] This patchset holds some common changes that were never upstreamed.
Date: Tue, 30 Jul 2019 16:46:27 +0200 [thread overview]
Message-ID: <20190730144649.19022-1-dev@pschenker.ch> (raw)
From: Philippe Schenker <philippe.schenker@toradex.com>
With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.
These patches I send here are separated out with changes that also
have a benfit for mainline.
Philippe
Marcel Ziswiler (1):
ARM: dts: imx7-colibri: make sure module supplies are always on
Max Krummenacher (2):
ARM: dts: imx6ull-colibri: reduce v_batt current in power off
ARM: dts: imx6ull: improve can templates
Oleksandr Suvorov (1):
ARM: dts: add recovery for I2C for iMX7
Philippe Schenker (15):
ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
ARM: dts: imx7-colibri: Add sleep mode to ethernet
ARM: dts: imx7-colibri: Add touch controllers
ARM: dts: imx6qdl-colibri: add phy to fec
ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
ARM: dts: imx6: Add sleep state to can interfaces
ARM: dts: imx6: Add touchscreens used on Toradex eval boards
ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board
ARM: dts: apalis-imx6: Add some example I2C devices
ARM: dts: apalis-imx6: Add some optional I2C devices
ARM: dts: imx6ull-colibri: Add sleep mode to fec
ARM: dts: imx6ull-colibri: Add watchdog
ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
ARM: dts: imx6/7-colibri: switch dr_mode to otg
ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board
Stefan Agner (3):
ARM: dts: imx7-colibri: disable HS400
ARM: dts: imx7-colibri: add GPIO wakeup key
ARM: dts: imx7-colibri: fix 1.8V/UHS support
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 52 ++++++++
arch/arm/boot/dts/imx6q-apalis-eval.dts | 122 ++++++++++++++++++
arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts | 19 +++
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 19 +++
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 27 +++-
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 27 +++-
.../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 63 +++++++++
.../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri.dtsi | 52 +++++++-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 51 ++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 114 ++++++++++++++--
12 files changed, 524 insertions(+), 26 deletions(-)
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-07-30 15:02 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-30 14:46 Philippe Schenker [this message]
2019-07-30 14:46 ` [PATCH 00/22] This patchset holds some common changes that were never upstreamed Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 01/22] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 02/22] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 03/22] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 04/22] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 05/22] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 06/22] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 07/22] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 08/22] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 09/22] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 10/22] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 11/22] ARM: dts: imx6: Add sleep state to can interfaces Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-31 7:14 ` Michal Vokáč
2019-07-31 7:14 ` Michal Vokáč
2019-07-31 11:13 ` Philippe Schenker
2019-07-31 11:13 ` Philippe Schenker
2019-07-31 11:13 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 20:46 ` Fabio Estevam
2019-07-30 20:46 ` Fabio Estevam
2019-07-30 20:46 ` Fabio Estevam
2019-07-31 6:43 ` Philippe Schenker
2019-07-31 6:43 ` Philippe Schenker
2019-07-31 6:43 ` Philippe Schenker
2019-07-31 6:54 ` Michal Vokáč
2019-07-31 6:54 ` Michal Vokáč
2019-07-31 6:54 ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 13/22] ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-31 7:09 ` Michal Vokáč
2019-07-31 7:09 ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 14/22] ARM: dts: apalis-imx6: Add some example I2C devices Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 20:53 ` Fabio Estevam
2019-07-30 20:53 ` Fabio Estevam
2019-07-30 20:53 ` Fabio Estevam
2019-07-31 11:36 ` Philippe Schenker
2019-07-31 11:36 ` Philippe Schenker
2019-07-31 11:36 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 15/22] ARM: dts: apalis-imx6: Add some optional " Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 20:43 ` Fabio Estevam
2019-07-30 20:43 ` Fabio Estevam
2019-07-30 20:43 ` Fabio Estevam
2019-07-31 11:37 ` Philippe Schenker
2019-07-31 11:37 ` Philippe Schenker
2019-07-31 11:37 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 16/22] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 17/22] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 18/22] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 19/22] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 20/22] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 21/22] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 22/22] ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190730144649.19022-1-dev@pschenker.ch \
--to=dev@pschenker.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.