All of lore.kernel.org
 help / color / mirror / Atom feed
From: chunguo feng <chunguo.feng@amlogic.com>
To: <lgirdwood@gmail.com>
Cc: <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com>,
	<RyanS.Lee@maximintegrated.com>, <bleung@chromium.org>,
	<pierre-louis.bossart@linux.intel.com>, <grundler@chromium.org>,
	<alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
	<chunguo.feng@amlogic.com>
Subject: [PATCH] ASoC: max98373: add  88200 and 96000 sampling rate support
Date: Wed, 31 Jul 2019 15:41:56 +0800	[thread overview]
Message-ID: <20190731074156.5620-1-chunguo.feng@amlogic.com> (raw)

From: fengchunguo <chunguo.feng@amlogic.com>

88200 and 96000 sampling rate was not enabled on driver, so can't be played.

The error information:
max98373 3-0031：rate 96000 not supported
max98373 3-0031：ASoC: can't set max98373-aif1 hw params: -22

Signed-off-by: fengchunguo <chunguo.feng@amlogic.com>
---
 sound/soc/codecs/max98373.c | 6 ++++++
 sound/soc/codecs/max98373.h | 2 ++
 2 files changed, 8 insertions(+)
 mode change 100644 => 100755 sound/soc/codecs/max98373.c
 mode change 100644 => 100755 sound/soc/codecs/max98373.h

diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
old mode 100644
new mode 100755
index 528695cd6a1c..8c601a3ebc27
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -267,6 +267,12 @@ static int max98373_dai_hw_params(struct snd_pcm_substream *substream,
 	case 48000:
 		sampling_rate = MAX98373_PCM_SR_SET1_SR_48000;
 		break;
+	case 88200:
+		sampling_rate = MAX98373_PCM_SR_SET1_SR_88200;
+		break;
+	case 96000:
+		sampling_rate = MAX98373_PCM_SR_SET1_SR_96000;
+		break;
 	default:
 		dev_err(component->dev, "rate %d not supported\n",
 			params_rate(params));
diff --git a/sound/soc/codecs/max98373.h b/sound/soc/codecs/max98373.h
old mode 100644
new mode 100755
index f6a37aa02f26..a59e51355a84
--- a/sound/soc/codecs/max98373.h
+++ b/sound/soc/codecs/max98373.h
@@ -130,6 +130,8 @@
 #define MAX98373_PCM_SR_SET1_SR_32000 (0x6 << 0)
 #define MAX98373_PCM_SR_SET1_SR_44100 (0x7 << 0)
 #define MAX98373_PCM_SR_SET1_SR_48000 (0x8 << 0)
+#define MAX98373_PCM_SR_SET1_SR_88200 (0x9 << 0)
+#define MAX98373_PCM_SR_SET1_SR_96000 (0xA << 0)
 
 /* MAX98373_R2028_PCM_SR_SETUP_2 */
 #define MAX98373_PCM_SR_SET2_SR_MASK (0xF << 4)
-- 
2.22.0


WARNING: multiple messages have this Message-ID (diff)
From: chunguo feng <chunguo.feng@amlogic.com>
To: lgirdwood@gmail.com
Cc: broonie@kernel.org, perex@perex.cz, tiwai@suse.com,
	RyanS.Lee@maximintegrated.com, bleung@chromium.org,
	pierre-louis.bossart@linux.intel.com, grundler@chromium.org,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	chunguo.feng@amlogic.com
Subject: [PATCH] ASoC: max98373: add  88200 and 96000 sampling rate support
Date: Wed, 31 Jul 2019 15:41:56 +0800	[thread overview]
Message-ID: <20190731074156.5620-1-chunguo.feng@amlogic.com> (raw)

From: fengchunguo <chunguo.feng@amlogic.com>

88200 and 96000 sampling rate was not enabled on driver, so can't be played.

The error information:
max98373 3-0031：rate 96000 not supported
max98373 3-0031：ASoC: can't set max98373-aif1 hw params: -22

Signed-off-by: fengchunguo <chunguo.feng@amlogic.com>
---
 sound/soc/codecs/max98373.c | 6 ++++++
 sound/soc/codecs/max98373.h | 2 ++
 2 files changed, 8 insertions(+)
 mode change 100644 => 100755 sound/soc/codecs/max98373.c
 mode change 100644 => 100755 sound/soc/codecs/max98373.h

diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
old mode 100644
new mode 100755
index 528695cd6a1c..8c601a3ebc27
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -267,6 +267,12 @@ static int max98373_dai_hw_params(struct snd_pcm_substream *substream,
 	case 48000:
 		sampling_rate = MAX98373_PCM_SR_SET1_SR_48000;
 		break;
+	case 88200:
+		sampling_rate = MAX98373_PCM_SR_SET1_SR_88200;
+		break;
+	case 96000:
+		sampling_rate = MAX98373_PCM_SR_SET1_SR_96000;
+		break;
 	default:
 		dev_err(component->dev, "rate %d not supported\n",
 			params_rate(params));
diff --git a/sound/soc/codecs/max98373.h b/sound/soc/codecs/max98373.h
old mode 100644
new mode 100755
index f6a37aa02f26..a59e51355a84
--- a/sound/soc/codecs/max98373.h
+++ b/sound/soc/codecs/max98373.h
@@ -130,6 +130,8 @@
 #define MAX98373_PCM_SR_SET1_SR_32000 (0x6 << 0)
 #define MAX98373_PCM_SR_SET1_SR_44100 (0x7 << 0)
 #define MAX98373_PCM_SR_SET1_SR_48000 (0x8 << 0)
+#define MAX98373_PCM_SR_SET1_SR_88200 (0x9 << 0)
+#define MAX98373_PCM_SR_SET1_SR_96000 (0xA << 0)
 
 /* MAX98373_R2028_PCM_SR_SETUP_2 */
 #define MAX98373_PCM_SR_SET2_SR_MASK (0xF << 4)
-- 
2.22.0

             reply	other threads:[~2019-07-31  7:42 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-31  7:41 chunguo feng [this message]
2019-07-31  7:41 ` [PATCH] ASoC: max98373: add 88200 and 96000 sampling rate support chunguo feng
2019-07-31 11:29 ` Applied "ASoC: max98373: add 88200 and 96000 sampling rate support" to the asoc tree Mark Brown
2019-07-31 11:29   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190731074156.5620-1-chunguo.feng@amlogic.com \
    --to=chunguo.feng@amlogic.com \
    --cc=RyanS.Lee@maximintegrated.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bleung@chromium.org \
    --cc=broonie@kernel.org \
    --cc=grundler@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.