From: Miquel Raynal <miquel.raynal@bootlin.com> To: Gregory Clement <gregory.clement@bootlin.com>, Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org, Antoine Tenart <antoine.tenart@bootlin.com>, Grzegorz Jaszczyk <jaz@semihalf.com>, Russell King <linux@armlinux.org.uk>, Maxime Chevallier <maxime.chevallier@bootlin.com>, Nadav Haklai <nadavh@marvell.com>, Martin Blumenstingl <martin.blumenstingl@googlemail.com>, Rob Herring <robh+dt@kernel.org>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 19/19] arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply Date: Wed, 31 Jul 2019 14:21:26 +0200 [thread overview] Message-ID: <20190731122126.3049-20-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20190731122126.3049-1-miquel.raynal@bootlin.com> Update Aramda 7k/8k DTs to use the phy-supply property of the (recent) generic PHY framework instead of the (legacy) usb-phy preperty. Both enable the supply when the PHY is enabled. The COMPHY nodes only provide SERDES lanes configuration. The power supply that is represented by the phy-supply property is just a regulator wired to the USB connector, hence the creation of connector nodes as child of the COMPHY nodes and the supply attached to it. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- .../arm64/boot/dts/marvell/armada-7040-db.dts | 26 ++++++++++--------- .../marvell/armada-8040-clearfog-gt-8k.dts | 13 +++++----- .../arm64/boot/dts/marvell/armada-8040-db.dts | 13 +++++----- .../boot/dts/marvell/armada-8040-mcbin.dtsi | 13 +++++----- 4 files changed, 35 insertions(+), 30 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index d1160edf57e0..a7eb4e7697a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -73,16 +73,6 @@ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; vin-supply = <&cp0_exp_usb3_1_current_regulator>; }; - - cp0_usb3_0_phy: cp0-usb3-0-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_0_vbus>; - }; - - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; }; &i2c0 { @@ -228,15 +218,27 @@ }; }; +&cp0_comphy1 { + cp0_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_0_vbus>; + }; +}; + &cp0_usb3_0 { - usb-phy = <&cp0_usb3_0_phy>; phys = <&cp0_comphy1 0>; phy-names = "cp0-usb3h0-comphy"; status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; phys = <&cp0_comphy4 1>; phy-names = "cp0-usb3h1-comphy"; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index bcb0421c7ac0..bd881497b872 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -51,11 +51,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; @@ -474,8 +469,14 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { - usb-phy = <&usb3h0_phy>; phys = <&cp1_comphy2 0>; phy-names = "cp1-usb3h0-comphy"; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 9746969e8da9..09fb5256f1db 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -54,11 +54,6 @@ vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; - cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "cp1-usb3h0-vbus"; @@ -164,9 +159,15 @@ status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + /* CON10 on CP0 expansion */ &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; phys = <&cp0_comphy4 1>; phy-names = "cp0-usb3h1-comphy"; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index a2c099a12e55..d250f4b2bfed 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -61,11 +61,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_eth0: sfp-eth0 { /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; @@ -360,9 +355,15 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - usb-phy = <&usb3h0_phy>; phys = <&cp1_comphy2 0>; phy-names = "cp1-usb3h0-comphy"; status = "okay"; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com> To: Gregory Clement <gregory.clement@bootlin.com>, Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org, Antoine Tenart <antoine.tenart@bootlin.com>, Grzegorz Jaszczyk <jaz@semihalf.com>, Russell King <linux@armlinux.org.uk>, Maxime Chevallier <maxime.chevallier@bootlin.com>, Nadav Haklai <nadavh@marvell.com>, Martin Blumenstingl <martin.blumenstingl@googlemail.com>, Rob Herring <robh+dt@kernel.org>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 19/19] arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply Date: Wed, 31 Jul 2019 14:21:26 +0200 [thread overview] Message-ID: <20190731122126.3049-20-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20190731122126.3049-1-miquel.raynal@bootlin.com> Update Aramda 7k/8k DTs to use the phy-supply property of the (recent) generic PHY framework instead of the (legacy) usb-phy preperty. Both enable the supply when the PHY is enabled. The COMPHY nodes only provide SERDES lanes configuration. The power supply that is represented by the phy-supply property is just a regulator wired to the USB connector, hence the creation of connector nodes as child of the COMPHY nodes and the supply attached to it. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- .../arm64/boot/dts/marvell/armada-7040-db.dts | 26 ++++++++++--------- .../marvell/armada-8040-clearfog-gt-8k.dts | 13 +++++----- .../arm64/boot/dts/marvell/armada-8040-db.dts | 13 +++++----- .../boot/dts/marvell/armada-8040-mcbin.dtsi | 13 +++++----- 4 files changed, 35 insertions(+), 30 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index d1160edf57e0..a7eb4e7697a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -73,16 +73,6 @@ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; vin-supply = <&cp0_exp_usb3_1_current_regulator>; }; - - cp0_usb3_0_phy: cp0-usb3-0-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_0_vbus>; - }; - - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; }; &i2c0 { @@ -228,15 +218,27 @@ }; }; +&cp0_comphy1 { + cp0_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_0_vbus>; + }; +}; + &cp0_usb3_0 { - usb-phy = <&cp0_usb3_0_phy>; phys = <&cp0_comphy1 0>; phy-names = "cp0-usb3h0-comphy"; status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; phys = <&cp0_comphy4 1>; phy-names = "cp0-usb3h1-comphy"; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index bcb0421c7ac0..bd881497b872 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -51,11 +51,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; @@ -474,8 +469,14 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { - usb-phy = <&usb3h0_phy>; phys = <&cp1_comphy2 0>; phy-names = "cp1-usb3h0-comphy"; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 9746969e8da9..09fb5256f1db 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -54,11 +54,6 @@ vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; - cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "cp1-usb3h0-vbus"; @@ -164,9 +159,15 @@ status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + /* CON10 on CP0 expansion */ &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; phys = <&cp0_comphy4 1>; phy-names = "cp0-usb3h1-comphy"; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index a2c099a12e55..d250f4b2bfed 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -61,11 +61,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_eth0: sfp-eth0 { /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; @@ -360,9 +355,15 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - usb-phy = <&usb3h0_phy>; phys = <&cp1_comphy2 0>; phy-names = "cp1-usb3h0-comphy"; status = "okay"; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-31 12:21 UTC|newest] Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-31 12:21 [PATCH v3 00/19] Enhance CP110 COMPHY support Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 01/19] phy: mvebu-cp110-comphy: Add clocks support Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 02/19] phy: mvebu-cp110-comphy: Explicitly initialize the lane submode Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 03/19] phy: mvebu-cp110-comphy: Add SMC call support Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 04/19] phy: mvebu-cp110-comphy: List already supported Ethernet modes Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 05/19] phy: mvebu-cp110-comphy: Add RXAUI support Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 06/19] phy: mvebu-cp110-comphy: Rename the macro handling only Ethernet modes Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 07/19] phy: mvebu-cp110-comphy: Allow non-Ethernet modes to be configured Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 08/19] phy: mvebu-cp110-comphy: Add USB3 host/device support Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 09/19] phy: mvebu-cp110-comphy: Add SATA support Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 10/19] phy: mvebu-cp110-comphy: Cosmetic change in a helper Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 11/19] phy: mvebu-cp110-comphy: Add PCIe support Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 12/19] phy: mvebu-cp110-comphy: Update comment about powering off all lanes at boot Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 13/19] dt-bindings: phy: Add Marvell COMPHY clocks Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-08-12 21:29 ` Rob Herring 2019-08-12 21:29 ` Rob Herring 2019-08-19 8:40 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 14/19] dt-bindings: pci: add PHY properties to Armada 7K/8K controller bindings Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-08-21 18:28 ` Rob Herring 2019-08-21 18:28 ` Rob Herring 2019-08-24 10:15 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 15/19] arm64: dts: marvell: Add CP110 COMPHY clocks Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 16/19] arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 17/19] arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` [PATCH v3 18/19] arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal 2019-07-31 12:21 ` Miquel Raynal [this message] 2019-07-31 12:21 ` [PATCH v3 19/19] arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply Miquel Raynal 2019-08-23 3:16 ` [PATCH v3 00/19] Enhance CP110 COMPHY support Kishon Vijay Abraham I 2019-08-23 7:33 ` Miquel Raynal 2019-08-24 11:54 ` Miquel Raynal 2019-08-26 11:51 ` Kishon Vijay Abraham I 2019-08-26 11:51 ` Kishon Vijay Abraham I 2019-08-26 12:23 ` Miquel Raynal 2019-08-27 14:22 ` Gregory CLEMENT 2019-08-27 14:22 ` Gregory CLEMENT
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190731122126.3049-20-miquel.raynal@bootlin.com \ --to=miquel.raynal@bootlin.com \ --cc=andrew@lunn.ch \ --cc=antoine.tenart@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=gregory.clement@bootlin.com \ --cc=jason@lakedaemon.net \ --cc=jaz@semihalf.com \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux@armlinux.org.uk \ --cc=martin.blumenstingl@googlemail.com \ --cc=maxime.chevallier@bootlin.com \ --cc=nadavh@marvell.com \ --cc=robh+dt@kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thomas.petazzoni@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.