From: Neil Armstrong <narmstrong@baylibre.com>
To: robh+dt@kernel.org
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
kishon@ti.com, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [RFC 7/9] dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml
Date: Thu, 1 Aug 2019 15:56:42 +0200 [thread overview]
Message-ID: <20190801135644.12843-8-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190801135644.12843-1-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 -------
.../phy/meson-g12a-usb3-pcie-phy.yaml | 61 +++++++++++++++++++
2 files changed, 61 insertions(+), 22 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
deleted file mode 100644
index 7cfc17e2df31..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic G12A USB3 + PCIE Combo PHY binding
-
-Required properties:
-- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
-- #phys-cells: must be 1. The cell number is used to select the phy mode
- as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
-- reg: The base address and length of the registers
-- clocks: a phandle to the 100MHz reference clock of this PHY
-- clock-names: must be "ref_clk"
-- resets: phandle to the reset lines for the PHY control
-- reset-names: must be "phy"
-
-Example:
- usb3_pcie_phy: phy@46000 {
- compatible = "amlogic,g12a-usb3-pcie-phy";
- reg = <0x0 0x46000 0x0 0x2000>;
- clocks = <&clkc CLKID_PCIE_PLL>;
- clock-names = "ref_clk";
- resets = <&reset RESET_PCIE_PHY>;
- reset-names = "phy";
- #phy-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
new file mode 100644
index 000000000000..fe4df6bd51b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/meson-g12a-usb3-pcie-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic G12A USB3 + PCIE Combo PHY
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,g12a-usb3-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ A phandle to the clock of this PHY
+
+ clock-names:
+ items:
+ - const: ref_clk
+
+ resets:
+ maxItems: 1
+ description:
+ A phandle to the reset line of this PHY
+
+ reset-names:
+ items:
+ - const: phy
+
+ "#phy-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#phy-cells"
+
+examples:
+ - |
+ phy@46000 {
+ compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+ reg = <0x46000 0x2000>;
+ clocks = <&ref_clk>;
+ clock-names = "ref_clk";
+ resets = <&phy_reset>;
+ reset-names = "phy";
+ #phy-cells = <1>;
+ };
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: robh+dt@kernel.org
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
kishon@ti.com, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [RFC 7/9] dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml
Date: Thu, 1 Aug 2019 15:56:42 +0200 [thread overview]
Message-ID: <20190801135644.12843-8-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190801135644.12843-1-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 -------
.../phy/meson-g12a-usb3-pcie-phy.yaml | 61 +++++++++++++++++++
2 files changed, 61 insertions(+), 22 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
deleted file mode 100644
index 7cfc17e2df31..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic G12A USB3 + PCIE Combo PHY binding
-
-Required properties:
-- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
-- #phys-cells: must be 1. The cell number is used to select the phy mode
- as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
-- reg: The base address and length of the registers
-- clocks: a phandle to the 100MHz reference clock of this PHY
-- clock-names: must be "ref_clk"
-- resets: phandle to the reset lines for the PHY control
-- reset-names: must be "phy"
-
-Example:
- usb3_pcie_phy: phy@46000 {
- compatible = "amlogic,g12a-usb3-pcie-phy";
- reg = <0x0 0x46000 0x0 0x2000>;
- clocks = <&clkc CLKID_PCIE_PLL>;
- clock-names = "ref_clk";
- resets = <&reset RESET_PCIE_PHY>;
- reset-names = "phy";
- #phy-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
new file mode 100644
index 000000000000..fe4df6bd51b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/meson-g12a-usb3-pcie-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic G12A USB3 + PCIE Combo PHY
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,g12a-usb3-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ A phandle to the clock of this PHY
+
+ clock-names:
+ items:
+ - const: ref_clk
+
+ resets:
+ maxItems: 1
+ description:
+ A phandle to the reset line of this PHY
+
+ reset-names:
+ items:
+ - const: phy
+
+ "#phy-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#phy-cells"
+
+examples:
+ - |
+ phy@46000 {
+ compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+ reg = <0x46000 0x2000>;
+ clocks = <&ref_clk>;
+ clock-names = "ref_clk";
+ resets = <&phy_reset>;
+ reset-names = "phy";
+ #phy-cells = <1>;
+ };
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: robh+dt@kernel.org
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
kishon@ti.com, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [RFC 7/9] dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml
Date: Thu, 1 Aug 2019 15:56:42 +0200 [thread overview]
Message-ID: <20190801135644.12843-8-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190801135644.12843-1-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 -------
.../phy/meson-g12a-usb3-pcie-phy.yaml | 61 +++++++++++++++++++
2 files changed, 61 insertions(+), 22 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
deleted file mode 100644
index 7cfc17e2df31..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic G12A USB3 + PCIE Combo PHY binding
-
-Required properties:
-- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
-- #phys-cells: must be 1. The cell number is used to select the phy mode
- as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
-- reg: The base address and length of the registers
-- clocks: a phandle to the 100MHz reference clock of this PHY
-- clock-names: must be "ref_clk"
-- resets: phandle to the reset lines for the PHY control
-- reset-names: must be "phy"
-
-Example:
- usb3_pcie_phy: phy@46000 {
- compatible = "amlogic,g12a-usb3-pcie-phy";
- reg = <0x0 0x46000 0x0 0x2000>;
- clocks = <&clkc CLKID_PCIE_PLL>;
- clock-names = "ref_clk";
- resets = <&reset RESET_PCIE_PHY>;
- reset-names = "phy";
- #phy-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
new file mode 100644
index 000000000000..fe4df6bd51b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/meson-g12a-usb3-pcie-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic G12A USB3 + PCIE Combo PHY
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,g12a-usb3-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ A phandle to the clock of this PHY
+
+ clock-names:
+ items:
+ - const: ref_clk
+
+ resets:
+ maxItems: 1
+ description:
+ A phandle to the reset line of this PHY
+
+ reset-names:
+ items:
+ - const: phy
+
+ "#phy-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#phy-cells"
+
+examples:
+ - |
+ phy@46000 {
+ compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+ reg = <0x46000 0x2000>;
+ clocks = <&ref_clk>;
+ clock-names = "ref_clk";
+ resets = <&phy_reset>;
+ reset-names = "phy";
+ #phy-cells = <1>;
+ };
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-08-01 13:56 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 13:56 [RFC 0/9] dt-bindings: first tentative of conversion to yaml format Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` [RFC 1/9] dt-bindings: mailbox: meson-mhu: convert to yaml Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` [RFC 2/9] dt-bindings: rng: amlogic,meson-rng: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` [RFC 3/9] dt-bindings: spi: meson: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 14:42 ` Rob Herring
2019-08-01 14:42 ` Rob Herring
2019-08-01 14:42 ` Rob Herring
2019-08-01 13:56 ` [RFC 4/9] dt-bindings: reset: amlogic,meson-reset: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` [RFC 5/9] dt-bindings: arm: amlogic: amlogic, meson-gx-ao-secure: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-02 14:37 ` Neil Armstrong
2019-08-02 14:37 ` Neil Armstrong
2019-08-02 14:37 ` Neil Armstrong
2019-08-02 15:32 ` Rob Herring
2019-08-02 15:32 ` Rob Herring
2019-08-02 15:32 ` Rob Herring
2019-08-01 13:56 ` [RFC 6/9] dt-bindings: phy: meson-g12a-usb2-phy: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 15:07 ` Rob Herring
2019-08-01 15:07 ` Rob Herring
2019-08-01 15:07 ` Rob Herring
2019-08-01 13:56 ` Neil Armstrong [this message]
2019-08-01 13:56 ` [RFC 7/9] dt-bindings: phy: meson-g12a-usb3-pcie-phy: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 15:08 ` Rob Herring
2019-08-01 15:08 ` Rob Herring
2019-08-01 15:08 ` Rob Herring
2019-08-01 13:56 ` [RFC 8/9] dt-bindings: serial: meson-uart: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 14:08 ` Greg KH
2019-08-01 14:08 ` Greg KH
2019-08-01 14:08 ` Greg KH
2019-08-01 15:15 ` Rob Herring
2019-08-01 15:15 ` Rob Herring
2019-08-01 15:15 ` Rob Herring
2019-08-01 13:56 ` [RFC 9/9] dt-bindings: watchdog: meson-gxbb-wdt: " Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 13:56 ` Neil Armstrong
2019-08-01 15:20 ` [RFC 0/9] dt-bindings: first tentative of conversion to yaml format Rob Herring
2019-08-01 15:20 ` Rob Herring
2019-08-01 15:20 ` Rob Herring
2019-08-01 15:20 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190801135644.12843-8-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.