From: "Gustavo A. R. Silva" <gustavo@embeddedor.com> To: Russell King <linux@armlinux.org.uk>, "James E.J. Bottomley" <jejb@linux.ibm.com>, "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-arm-kernel@lists.infradead.org, linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, "Gustavo A. R. Silva" <gustavo@embeddedor.com> Subject: [PATCH] scsi: fas216: Mark expected switch fall-throughs Date: Tue, 6 Aug 2019 03:29:02 -0500 [thread overview] Message-ID: <20190806082902.GA11122@embeddedor> (raw) Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’: drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_kick’: drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’: drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’: drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’: drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> --- drivers/scsi/arm/fas216.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index aea4fd73c862..6c68c2303638 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -603,6 +603,7 @@ static void fas216_handlesync(FAS216_Info *info, char *msg) msgqueue_flush(&info->scsi.msgs); msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT); info->scsi.phase = PHASE_MSGOUT_EXPECT; + /* fall through */ case async: dev->period = info->ifcfg.asyncperiod / 4; @@ -915,6 +916,7 @@ static void fas216_disconnect_intr(FAS216_Info *info) fas216_done(info, DID_ABORT); break; } + /* else, fall through */ default: /* huh? */ printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n", @@ -1411,6 +1413,8 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out -> Status */ case STATE(STAT_STATUS, PHASE_DATAIN): /* Data In -> Status */ fas216_stoptransfer(info); + /* fall through */ + case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ case STATE(STAT_STATUS, PHASE_MSGOUT): /* Message Out -> Status */ case STATE(STAT_STATUS, PHASE_COMMAND): /* Command -> Status */ @@ -1422,6 +1426,8 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out -> Message In */ case STATE(STAT_MESGIN, PHASE_DATAIN): /* Data In -> Message In */ fas216_stoptransfer(info); + /* fall through */ + case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In */ case STATE(STAT_MESGIN, PHASE_MSGOUT): /* Message Out -> Message In */ @@ -1575,6 +1581,7 @@ static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned fas216_message(info); break; } + /* else, fall through */ default: fas216_log(info, 0, "internal phase %s for function done?" @@ -1957,6 +1964,7 @@ static void fas216_kick(FAS216_Info *info) switch (where_from) { case TYPE_QUEUE: fas216_allocate_tag(info, SCpnt); + /* fall through */ case TYPE_OTHER: fas216_start_command(info, SCpnt); break; -- 2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com> To: Russell King <linux@armlinux.org.uk>, "James E.J. Bottomley" <jejb@linux.ibm.com>, "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>, linux-scsi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] scsi: fas216: Mark expected switch fall-throughs Date: Tue, 6 Aug 2019 03:29:02 -0500 [thread overview] Message-ID: <20190806082902.GA11122@embeddedor> (raw) Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’: drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_kick’: drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’: drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’: drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’: drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> --- drivers/scsi/arm/fas216.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index aea4fd73c862..6c68c2303638 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -603,6 +603,7 @@ static void fas216_handlesync(FAS216_Info *info, char *msg) msgqueue_flush(&info->scsi.msgs); msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT); info->scsi.phase = PHASE_MSGOUT_EXPECT; + /* fall through */ case async: dev->period = info->ifcfg.asyncperiod / 4; @@ -915,6 +916,7 @@ static void fas216_disconnect_intr(FAS216_Info *info) fas216_done(info, DID_ABORT); break; } + /* else, fall through */ default: /* huh? */ printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n", @@ -1411,6 +1413,8 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out -> Status */ case STATE(STAT_STATUS, PHASE_DATAIN): /* Data In -> Status */ fas216_stoptransfer(info); + /* fall through */ + case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ case STATE(STAT_STATUS, PHASE_MSGOUT): /* Message Out -> Status */ case STATE(STAT_STATUS, PHASE_COMMAND): /* Command -> Status */ @@ -1422,6 +1426,8 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out -> Message In */ case STATE(STAT_MESGIN, PHASE_DATAIN): /* Data In -> Message In */ fas216_stoptransfer(info); + /* fall through */ + case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In */ case STATE(STAT_MESGIN, PHASE_MSGOUT): /* Message Out -> Message In */ @@ -1575,6 +1581,7 @@ static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned fas216_message(info); break; } + /* else, fall through */ default: fas216_log(info, 0, "internal phase %s for function done?" @@ -1957,6 +1964,7 @@ static void fas216_kick(FAS216_Info *info) switch (where_from) { case TYPE_QUEUE: fas216_allocate_tag(info, SCpnt); + /* fall through */ case TYPE_OTHER: fas216_start_command(info, SCpnt); break; -- 2.22.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-08-06 8:29 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-06 8:29 Gustavo A. R. Silva [this message] 2019-08-06 8:29 ` [PATCH] scsi: fas216: Mark expected switch fall-throughs Gustavo A. R. Silva 2019-08-13 1:54 ` Martin K. Petersen 2019-08-13 1:54 ` Martin K. Petersen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190806082902.GA11122@embeddedor \ --to=gustavo@embeddedor.com \ --cc=jejb@linux.ibm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-scsi@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=martin.petersen@oracle.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.