From: Guillaume La Roque <glaroque@baylibre.com>
To: daniel.lezcano@linaro.org, khilman@baylibre.com
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs
Date: Tue, 6 Aug 2019 15:05:00 +0200 [thread overview]
Message-ID: <20190806130506.8753-1-glaroque@baylibre.com> (raw)
This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.
First implementation was doing on IIO[1] but after comments i move on thermal framework.
Formulas and calibration values come from amlogic.
Changes since v2:
- fix yaml documention
- remove unneeded status variable for temperature-sensor node
- rework driver after Martin review
- add some information in commit message
Changes since v1:
- fix enum vs const in documentation
- fix error with thermal-sensor-cells value set to 1 instead of 0
- add some dependencies needed to add cooling-maps
Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
- missing dwc2 phy-names[2]
- patchsets to add DVFS on G12a[3] which have deps on [4] and [5]
[1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
[2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
[3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
[4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
[5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/
Guillaume La Roque (6):
dt-bindings: thermal: Add DT bindings documentation for Amlogic
Thermal
thermal: amlogic: Add thermal driver to support G12 SoCs
arm64: dts: amlogic: g12: add temperature sensor
arm64: dts: meson: sei510: Add minimal thermal zone
arm64: dts: amlogic: odroid-n2: add minimal thermal zone
MAINTAINERS: add entry for Amlogic Thermal driver
.../bindings/thermal/amlogic,thermal.yaml | 54 +++
MAINTAINERS | 9 +
.../boot/dts/amlogic/meson-g12-common.dtsi | 20 ++
.../boot/dts/amlogic/meson-g12a-sei510.dts | 56 +++
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 60 ++++
drivers/thermal/Kconfig | 11 +
drivers/thermal/Makefile | 1 +
drivers/thermal/amlogic_thermal.c | 336 ++++++++++++++++++
8 files changed, 547 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
create mode 100644 drivers/thermal/amlogic_thermal.c
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Guillaume La Roque <glaroque@baylibre.com>
To: daniel.lezcano@linaro.org, khilman@baylibre.com
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs
Date: Tue, 6 Aug 2019 15:05:00 +0200 [thread overview]
Message-ID: <20190806130506.8753-1-glaroque@baylibre.com> (raw)
This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.
First implementation was doing on IIO[1] but after comments i move on thermal framework.
Formulas and calibration values come from amlogic.
Changes since v2:
- fix yaml documention
- remove unneeded status variable for temperature-sensor node
- rework driver after Martin review
- add some information in commit message
Changes since v1:
- fix enum vs const in documentation
- fix error with thermal-sensor-cells value set to 1 instead of 0
- add some dependencies needed to add cooling-maps
Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
- missing dwc2 phy-names[2]
- patchsets to add DVFS on G12a[3] which have deps on [4] and [5]
[1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
[2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
[3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
[4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
[5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/
Guillaume La Roque (6):
dt-bindings: thermal: Add DT bindings documentation for Amlogic
Thermal
thermal: amlogic: Add thermal driver to support G12 SoCs
arm64: dts: amlogic: g12: add temperature sensor
arm64: dts: meson: sei510: Add minimal thermal zone
arm64: dts: amlogic: odroid-n2: add minimal thermal zone
MAINTAINERS: add entry for Amlogic Thermal driver
.../bindings/thermal/amlogic,thermal.yaml | 54 +++
MAINTAINERS | 9 +
.../boot/dts/amlogic/meson-g12-common.dtsi | 20 ++
.../boot/dts/amlogic/meson-g12a-sei510.dts | 56 +++
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 60 ++++
drivers/thermal/Kconfig | 11 +
drivers/thermal/Makefile | 1 +
drivers/thermal/amlogic_thermal.c | 336 ++++++++++++++++++
8 files changed, 547 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
create mode 100644 drivers/thermal/amlogic_thermal.c
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Guillaume La Roque <glaroque@baylibre.com>
To: daniel.lezcano@linaro.org, khilman@baylibre.com
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs
Date: Tue, 6 Aug 2019 15:05:00 +0200 [thread overview]
Message-ID: <20190806130506.8753-1-glaroque@baylibre.com> (raw)
This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.
First implementation was doing on IIO[1] but after comments i move on thermal framework.
Formulas and calibration values come from amlogic.
Changes since v2:
- fix yaml documention
- remove unneeded status variable for temperature-sensor node
- rework driver after Martin review
- add some information in commit message
Changes since v1:
- fix enum vs const in documentation
- fix error with thermal-sensor-cells value set to 1 instead of 0
- add some dependencies needed to add cooling-maps
Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
- missing dwc2 phy-names[2]
- patchsets to add DVFS on G12a[3] which have deps on [4] and [5]
[1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
[2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
[3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
[4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
[5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/
Guillaume La Roque (6):
dt-bindings: thermal: Add DT bindings documentation for Amlogic
Thermal
thermal: amlogic: Add thermal driver to support G12 SoCs
arm64: dts: amlogic: g12: add temperature sensor
arm64: dts: meson: sei510: Add minimal thermal zone
arm64: dts: amlogic: odroid-n2: add minimal thermal zone
MAINTAINERS: add entry for Amlogic Thermal driver
.../bindings/thermal/amlogic,thermal.yaml | 54 +++
MAINTAINERS | 9 +
.../boot/dts/amlogic/meson-g12-common.dtsi | 20 ++
.../boot/dts/amlogic/meson-g12a-sei510.dts | 56 +++
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 60 ++++
drivers/thermal/Kconfig | 11 +
drivers/thermal/Makefile | 1 +
drivers/thermal/amlogic_thermal.c | 336 ++++++++++++++++++
8 files changed, 547 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
create mode 100644 drivers/thermal/amlogic_thermal.c
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-08-06 13:05 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 13:05 Guillaume La Roque [this message]
2019-08-06 13:05 ` [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` [PATCH v3 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-21 19:31 ` Rob Herring
2019-08-21 19:31 ` Rob Herring
2019-08-21 19:31 ` Rob Herring
2019-08-21 19:31 ` Rob Herring
2019-08-06 13:05 ` [PATCH v3 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-11 15:43 ` Martin Blumenstingl
2019-08-11 15:43 ` Martin Blumenstingl
2019-08-11 15:43 ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 3/6] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` [PATCH v3 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 19:24 ` Martin Blumenstingl
2019-08-06 19:24 ` Martin Blumenstingl
2019-08-06 19:24 ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 5/6] arm64: dts: amlogic: odroid-n2: add " Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 19:25 ` Martin Blumenstingl
2019-08-06 19:25 ` Martin Blumenstingl
2019-08-06 19:25 ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 6/6] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque
2019-08-10 0:11 ` [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman
2019-08-10 0:11 ` Kevin Hilman
2019-08-10 0:11 ` Kevin Hilman
2019-08-21 21:30 ` Kevin Hilman
2019-08-21 21:30 ` Kevin Hilman
2019-08-21 21:30 ` Kevin Hilman
2019-08-14 12:24 ` Christian Hewitt
2019-08-14 12:24 ` Christian Hewitt
2019-08-14 12:24 ` Christian Hewitt
2019-08-21 21:19 ` guillaume La Roque
2019-08-21 21:19 ` guillaume La Roque
2019-08-21 21:19 ` guillaume La Roque
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190806130506.8753-1-glaroque@baylibre.com \
--to=glaroque@baylibre.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.