From: Miquel Raynal <miquel.raynal@bootlin.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, Yan Markman <ymarkman@marvell.com>, Antoine Tenart <antoine.tenart@bootlin.com>, Grzegorz Jaszczyk <jaz@semihalf.com>, Gregory Clement <gregory.clement@bootlin.com>, Maxime Chevallier <maxime.chevallier@bootlin.com>, Nadav Haklai <nadavh@marvell.com>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, Stefan Chulski <stefanc@marvell.com>, Marcin Wojtas <mw@semihalf.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 06/20] arm64: dts: marvell: Move clocks to AP806 specific file Date: Tue, 6 Aug 2019 16:54:46 +0200 [thread overview] Message-ID: <20190806145500.24109-7-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20190806145500.24109-1-miquel.raynal@bootlin.com> Regular clocks and CPU clocks are specific to AP806, move them out of the generic AP80x file so that AP807 can use its own clocks. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++ arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------ 2 files changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index cdadb28f287e..866628679ac7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -12,3 +12,19 @@ model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; }; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index c44cd7c64bf6..b74b5cf724be 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -248,11 +248,6 @@ compatible = "syscon", "simple-mfd"; reg = <0x6f4000 0x2000>; - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - ap_pinctrl: pinctrl { compatible = "marvell,ap806-pinctrl"; @@ -278,13 +273,6 @@ #address-cells = <1>; #size-cells = <1>; - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; - ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, Yan Markman <ymarkman@marvell.com>, Antoine Tenart <antoine.tenart@bootlin.com>, Grzegorz Jaszczyk <jaz@semihalf.com>, Gregory Clement <gregory.clement@bootlin.com>, Maxime Chevallier <maxime.chevallier@bootlin.com>, Nadav Haklai <nadavh@marvell.com>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, Stefan Chulski <stefanc@marvell.com>, Marcin Wojtas <mw@semihalf.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 06/20] arm64: dts: marvell: Move clocks to AP806 specific file Date: Tue, 6 Aug 2019 16:54:46 +0200 [thread overview] Message-ID: <20190806145500.24109-7-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20190806145500.24109-1-miquel.raynal@bootlin.com> Regular clocks and CPU clocks are specific to AP806, move them out of the generic AP80x file so that AP807 can use its own clocks. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++ arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------ 2 files changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index cdadb28f287e..866628679ac7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -12,3 +12,19 @@ model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; }; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index c44cd7c64bf6..b74b5cf724be 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -248,11 +248,6 @@ compatible = "syscon", "simple-mfd"; reg = <0x6f4000 0x2000>; - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - ap_pinctrl: pinctrl { compatible = "marvell,ap806-pinctrl"; @@ -278,13 +273,6 @@ #address-cells = <1>; #size-cells = <1>; - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; - ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-06 14:54 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-06 14:54 [PATCH 00/20] Add new Marvell CN9130 SoC support Miquel Raynal 2019-08-06 14:54 ` [PATCH 01/20] arm64: dts: marvell: Enumerate the first AP806 syscon Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 02/20] arm64: dts: marvell: Add AP806-dual missing CPU clocks Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 03/20] dt-bindings: ap80x: replace AP806 with AP80x Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-21 19:32 ` Rob Herring 2019-08-21 19:32 ` Rob Herring 2019-08-06 14:54 ` [PATCH 04/20] MAINTAINERS: Add new Marvell CN9130-based files to track Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 05/20] arm64: dts: marvell: Prepare the introduction of AP807 based SoCs Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-27 15:20 ` Gregory CLEMENT 2019-08-27 15:20 ` Gregory CLEMENT 2019-08-06 14:54 ` Miquel Raynal [this message] 2019-08-06 14:54 ` [PATCH 06/20] arm64: dts: marvell: Move clocks to AP806 specific file Miquel Raynal 2019-08-06 14:54 ` [PATCH 07/20] arm64: dts: marvell: Add support for AP807/AP807-quad Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 08/20] arm64: dts: marvell: Add AP806-dual cache description Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 09/20] arm64: dts: marvell: Add AP806-quad " Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 10/20] arm64: dts: marvell: Add AP807-quad " Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 11/20] arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment alignment Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 12/20] arm64: dts: marvell: Prepare the introduction of CP115 Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 13/20] arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 14/20] arm64: dts: marvell: Externalize PCIe macros " Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 15/20] arm64: dts: marvell: Add support for CP115 Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 16/20] dt-bindings: marvell: Declare the CN913x SoC compatibles Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-21 19:37 ` Rob Herring 2019-08-21 19:37 ` Rob Herring 2019-08-24 11:30 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 17/20] arm64: dts: marvell: Add support for Marvell CN9130 SoC support Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 18/20] arm64: dts: marvell: Add support for Marvell CN9130-DB Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:54 ` [PATCH 19/20] arm64: dts: marvell: Add support for Marvell CN9131-DB Miquel Raynal 2019-08-06 14:54 ` Miquel Raynal 2019-08-06 14:55 ` [PATCH 20/20] arm64: dts: marvell: Add support for Marvell CN9132-DB Miquel Raynal 2019-08-06 14:55 ` Miquel Raynal
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190806145500.24109-7-miquel.raynal@bootlin.com \ --to=miquel.raynal@bootlin.com \ --cc=antoine.tenart@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=gregory.clement@bootlin.com \ --cc=jaz@semihalf.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=maxime.chevallier@bootlin.com \ --cc=mw@semihalf.com \ --cc=nadavh@marvell.com \ --cc=robh+dt@kernel.org \ --cc=stefanc@marvell.com \ --cc=thomas.petazzoni@bootlin.com \ --cc=ymarkman@marvell.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.