All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Thierry Reding <treding@nvidia.com>
Subject: [PATCH] gpio: aspeed: Pass irqchip when adding gpiochip
Date: Fri,  9 Aug 2019 14:55:15 +0200	[thread overview]
Message-ID: <20190809125515.19094-1-linus.walleij@linaro.org> (raw)

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Hi Aspeed folks, it'd be great if you could test/review this
patch.
---
 drivers/gpio/gpio-aspeed.c | 60 ++++++++++++++++++--------------------
 1 file changed, 29 insertions(+), 31 deletions(-)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 13d80bfbc3b6..9defe25d4721 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -711,32 +711,6 @@ static void set_irq_valid_mask(struct aspeed_gpio *gpio)
 	}
 }
 
-static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio,
-		struct platform_device *pdev)
-{
-	int rc;
-
-	rc = platform_get_irq(pdev, 0);
-	if (rc < 0)
-		return rc;
-
-	gpio->irq = rc;
-
-	set_irq_valid_mask(gpio);
-
-	rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip,
-			0, handle_bad_irq, IRQ_TYPE_NONE);
-	if (rc) {
-		dev_info(&pdev->dev, "Could not add irqchip\n");
-		return rc;
-	}
-
-	gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip,
-				     gpio->irq, aspeed_gpio_irq_handler);
-
-	return 0;
-}
-
 static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
 					unsigned int offset, bool enable)
 {
@@ -1189,7 +1163,6 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
 	gpio->chip.set_config = aspeed_gpio_set_config;
 	gpio->chip.label = dev_name(&pdev->dev);
 	gpio->chip.base = -1;
-	gpio->chip.irq.need_valid_mask = true;
 
 	/* Allocate a cache of the output registers */
 	banks = gpio->config->nr_gpios >> 5;
@@ -1212,16 +1185,41 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
 		aspeed_gpio_change_cmd_source(gpio, bank, 3, GPIO_CMDSRC_ARM);
 	}
 
-	rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
-	if (rc < 0)
-		return rc;
+	/* Optionally set up an irqchip if there is an IRQ */
+	rc = platform_get_irq(pdev, 0);
+	if (rc > 0) {
+		struct gpio_irq_chip *girq;
+
+		gpio->irq = rc;
+		girq = &gpio->chip.irq;
+		girq->chip = &aspeed_gpio_irqchip;
+		girq->parent_handler = aspeed_gpio_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(&pdev->dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = gpio->irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_bad_irq;
+		girq->need_valid_mask = true;
+	}
 
 	gpio->offset_timer =
 		devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);
 	if (!gpio->offset_timer)
 		return -ENOMEM;
 
-	return aspeed_gpio_setup_irqs(gpio, pdev);
+	rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (rc < 0)
+		return rc;
+
+	/* Now the valid mask is allocated */
+	if (gpio->irq)
+		set_irq_valid_mask(gpio);
+
+	return 0;
 }
 
 static struct platform_driver aspeed_gpio_driver = {
-- 
2.21.0


             reply	other threads:[~2019-08-09 12:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09 12:55 Linus Walleij [this message]
2019-08-13  4:36 ` [PATCH] gpio: aspeed: Pass irqchip when adding gpiochip Andrew Jeffery
2019-08-13  4:44 ` Joel Stanley
2019-08-15  8:01   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809125515.19094-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=andrew@aj.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=bgolaszewski@baylibre.com \
    --cc=joel@jms.id.au \
    --cc=linux-gpio@vger.kernel.org \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.