All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org
Cc: "Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>,
	"Thierry Reding" <treding@nvidia.com>
Subject: [PATCH] gpio: hlwd: Pass irqchip when adding gpiochip
Date: Fri,  9 Aug 2019 16:00:05 +0200	[thread overview]
Message-ID: <20190809140005.11654-1-linus.walleij@linaro.org> (raw)

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-hlwd.c | 58 +++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 28 deletions(-)

diff --git a/drivers/gpio/gpio-hlwd.c b/drivers/gpio/gpio-hlwd.c
index e5fa00f8145f..4a17599f6d44 100644
--- a/drivers/gpio/gpio-hlwd.c
+++ b/drivers/gpio/gpio-hlwd.c
@@ -244,43 +244,45 @@ static int hlwd_gpio_probe(struct platform_device *pdev)
 		ngpios = 32;
 	hlwd->gpioc.ngpio = ngpios;
 
-	res = devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd);
-	if (res)
-		return res;
-
 	/* Mask and ack all interrupts */
 	iowrite32be(0, hlwd->regs + HW_GPIOB_INTMASK);
 	iowrite32be(0xffffffff, hlwd->regs + HW_GPIOB_INTFLAG);
 
 	/*
 	 * If this GPIO controller is not marked as an interrupt controller in
-	 * the DT, return.
+	 * the DT, skip interrupt support.
 	 */
-	if (!of_property_read_bool(pdev->dev.of_node, "interrupt-controller"))
-		return 0;
-
-	hlwd->irq = platform_get_irq(pdev, 0);
-	if (hlwd->irq < 0) {
-		dev_info(&pdev->dev, "platform_get_irq returned %d\n",
-			 hlwd->irq);
-		return hlwd->irq;
+	if (of_property_read_bool(pdev->dev.of_node, "interrupt-controller")) {
+		struct gpio_irq_chip *girq;
+
+		hlwd->irq = platform_get_irq(pdev, 0);
+		if (hlwd->irq < 0) {
+			dev_info(&pdev->dev, "platform_get_irq returned %d\n",
+				 hlwd->irq);
+			return hlwd->irq;
+		}
+
+		hlwd->irqc.name = dev_name(&pdev->dev);
+		hlwd->irqc.irq_mask = hlwd_gpio_irq_mask;
+		hlwd->irqc.irq_unmask = hlwd_gpio_irq_unmask;
+		hlwd->irqc.irq_enable = hlwd_gpio_irq_enable;
+		hlwd->irqc.irq_set_type = hlwd_gpio_irq_set_type;
+
+		girq = &hlwd->gpioc.irq;
+		girq->chip = &hlwd->irqc;
+		girq->parent_handler = hlwd_gpio_irqhandler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(&pdev->dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = hlwd->irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_level_irq;
 	}
 
-	hlwd->irqc.name = dev_name(&pdev->dev);
-	hlwd->irqc.irq_mask = hlwd_gpio_irq_mask;
-	hlwd->irqc.irq_unmask = hlwd_gpio_irq_unmask;
-	hlwd->irqc.irq_enable = hlwd_gpio_irq_enable;
-	hlwd->irqc.irq_set_type = hlwd_gpio_irq_set_type;
-
-	res = gpiochip_irqchip_add(&hlwd->gpioc, &hlwd->irqc, 0,
-				   handle_level_irq, IRQ_TYPE_NONE);
-	if (res)
-		return res;
-
-	gpiochip_set_chained_irqchip(&hlwd->gpioc, &hlwd->irqc,
-				     hlwd->irq, hlwd_gpio_irqhandler);
-
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd);
 }
 
 static const struct of_device_id hlwd_gpio_match[] = {
-- 
2.21.0


             reply	other threads:[~2019-08-09 14:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09 14:00 Linus Walleij [this message]
2019-08-10 10:35 ` [PATCH] gpio: hlwd: Pass irqchip when adding gpiochip Jonathan Neuschäfer
2019-08-12 19:06   ` Jonathan Neuschäfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809140005.11654-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=bgolaszewski@baylibre.com \
    --cc=j.neuschaefer@gmx.net \
    --cc=linux-gpio@vger.kernel.org \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.