All of lore.kernel.org
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@arm.com>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@arm.com>,
	Stefano Stabellini <sstabellini@kernel.org>,
	Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Subject: [Xen-devel] [PATCH v3 06/28] xen/arm64: head: Introduce a macro to get a PC-relative address of a symbol
Date: Mon, 12 Aug 2019 18:29:57 +0100	[thread overview]
Message-ID: <20190812173019.11956-7-julien.grall@arm.com> (raw)
In-Reply-To: <20190812173019.11956-1-julien.grall@arm.com>

Arm64 provides instructions to load a PC-relative address, but with some
limitations:
   - adr is enable to cope with +/-1MB
   - adrp is enale to cope with +/-4GB but relative to a 4KB page
     address

Because of that, the code requires to use 2 instructions to load any Xen
symbol. To make the code more obvious, introducing a new macro adr_l is
introduced.

The new macro is used to replace a couple of open-coded use in
efi_xen_start.

The macro is copied from Linux 5.2-rc4.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>

---
    Changes in v3:
        - Fix typo in my e-mail address
        - Add Stefano's acked-by

    Changes in v2:
        - Patch added
---
 xen/arch/arm/arm64/head.S | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 9b703e79ce..cd03101196 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -117,6 +117,18 @@
 
 #endif /* !CONFIG_EARLY_PRINTK */
 
+/*
+ * Pseudo-op for PC relative adr <reg>, <symbol> where <symbol> is
+ * within the range +/- 4GB of the PC.
+ *
+ * @dst: destination register (64 bit wide)
+ * @sym: name of the symbol
+ */
+.macro  adr_l, dst, sym
+        adrp \dst, \sym
+        add  \dst, \dst, :lo12:\sym
+.endm
+
 /* Load the physical address of a symbol into xb */
 .macro load_paddr xb, sym
         ldr \xb, =\sym
@@ -895,11 +907,9 @@ ENTRY(efi_xen_start)
          * Flush dcache covering current runtime addresses
          * of xen text/data. Then flush all of icache.
          */
-        adrp  x1, _start
-        add   x1, x1, #:lo12:_start
+        adr_l x1, _start
         mov   x0, x1
-        adrp  x2, _end
-        add   x2, x2, #:lo12:_end
+        adr_l x2, _end
         sub   x1, x2, x1
 
         bl    __flush_dcache_area
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2019-08-13  6:51 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-12 17:29 [Xen-devel] [PATCH v3 00/28] xen/arm: Rework head.S to make it more compliant with the Arm Arm Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 01/28] xen/arm: lpae: Allow more LPAE helpers to be used in assembly Julien Grall
2019-08-22 17:07   ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 02/28] xen/arm64: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 17:58   ` Stefano Stabellini
2019-08-22 18:25     ` Julien Grall
2019-08-22 18:29       ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 03/28] xen/arm64: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 04/28] xen/arm64: head: Rework and document launch() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 05/28] xen/arm64: head: Setup TTBR_EL2 in enable_mmu() and add missing isb Julien Grall
2019-08-12 17:29 ` Julien Grall [this message]
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 07/28] xen/arm64: head: Fix typo in the documentation on top of init_uart() Julien Grall
2019-08-22 17:08   ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 08/28] xen/arm32: head: Add a macro to move an immediate constant into a 32-bit register Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 09/28] xen/arm32: head: Mark the end of subroutines with ENDPROC Julien Grall
2019-08-12 17:33   ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 10/28] xen/arm32: head: Don't clobber r14/lr in the macro PRINT Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 11/28] xen/arm32: head: Rework UART initialization on boot CPU Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 12/28] xen/arm32: head: Introduce print_reg Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 13/28] xen/arm32: head: Introduce distinct paths for the boot CPU and secondary CPUs Julien Grall
2019-08-22 17:11   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 14/28] xen/arm32: head: Rework and document check_cpu_mode() Julien Grall
2019-08-22 17:14   ` Stefano Stabellini
2019-09-07 10:35     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 15/28] xen/arm32: head: Rework and document zero_bss() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 16/28] xen/arm32: head: Document create_pages_tables() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 17/28] xen/arm32: head: Document enable_mmu() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 18/28] xen/arm32: head: Move assembly switch to the runtime PT in secondary CPUs path Julien Grall
2019-08-22 17:17   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 19/28] xen/arm32: head: Don't setup the fixmap on secondary CPUs Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 20/28] xen/arm32: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 18:17   ` Stefano Stabellini
2019-08-22 18:31     ` Julien Grall
2019-08-22 22:53       ` Stefano Stabellini
2019-08-22 23:39         ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 21/28] xen/arm32: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 22/28] xen/arm32: head: Rework and document launch() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 23/28] xen/arm32: head: Setup HTTBR in enable_mmu() and add missing isb Julien Grall
2019-08-22 17:15   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 24/28] xen/arm: Zero BSS after the MMU and D-cache is turned on Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 25/28] xen/arm64: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-22 23:31   ` Stefano Stabellini
2019-08-22 23:44     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 26/28] xen/arm64: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall
2019-08-24  1:16   ` Stefano Stabellini
2019-09-17 17:53     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 27/28] xen/arm32: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-23  1:10   ` Stefano Stabellini
2019-08-23  9:40     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 28/28] xen/arm32: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190812173019.11956-7-julien.grall@arm.com \
    --to=julien.grall@arm.com \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.