From: John Stultz <john.stultz@linaro.org> To: lkml <linux-kernel@vger.kernel.org> Cc: Xu YiPing <xuyiping@hisilicon.com>, Rongrong Zou <zourongrong@gmail.com>, Xinliang Liu <z.liuxinliang@hisilicon.com>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, dri-devel <dri-devel@lists.freedesktop.org>, Sam Ravnborg <sam@ravnborg.org>, John Stultz <john.stultz@linaro.org> Subject: [RESEND][PATCH v3 08/26] drm: kirin: Rename ade_crtc to kirin_crtc Date: Wed, 14 Aug 2019 18:46:44 +0000 [thread overview] Message-ID: <20190814184702.54275-9-john.stultz@linaro.org> (raw) In-Reply-To: <20190814184702.54275-1-john.stultz@linaro.org> From: Xu YiPing <xuyiping@hisilicon.com> As part of refactoring the kirin driver to better support different hardware revisions, this patch renames the struct ade_crtc to kirin_crtc. The struct kirin_crtc will later used by both kirin620 and future kirin960 driver, and will be moved to a common kirin_drm_drv.h in a future patch Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> [jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> --- .../gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 74 +++++++++---------- 1 file changed, 37 insertions(+), 37 deletions(-) diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c index c09040876e68..ee3dc3d0f738 100644 --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c @@ -38,8 +38,8 @@ #define OUT_OVLY ADE_OVLY2 /* output overlay compositor */ #define ADE_DEBUG 1 -#define to_ade_crtc(crtc) \ - container_of(crtc, struct ade_crtc, base) +#define to_kirin_crtc(crtc) \ + container_of(crtc, struct kirin_crtc, base) #define to_kirin_plane(plane) \ container_of(plane, struct kirin_plane, base) @@ -56,9 +56,9 @@ struct ade_hw_ctx { int irq; }; -struct ade_crtc { +struct kirin_crtc { struct drm_crtc base; - struct ade_hw_ctx *ctx; + void *hw_ctx; struct work_struct display_reset_wq; bool enable; }; @@ -70,7 +70,7 @@ struct kirin_plane { }; struct ade_data { - struct ade_crtc acrtc; + struct kirin_crtc crtc; struct kirin_plane planes[ADE_CH_NUM]; struct ade_hw_ctx ctx; }; @@ -184,8 +184,8 @@ static bool ade_crtc_mode_fixup(struct drm_crtc *crtc, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; adjusted_mode->clock = clk_round_rate(ctx->ade_pix_clk, mode->clock * 1000) / 1000; @@ -317,8 +317,8 @@ static void ade_set_medianoc_qos(struct ade_hw_ctx *ctx) static int ade_crtc_enable_vblank(struct drm_crtc *crtc) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; void __iomem *base = ctx->base; if (!ctx->power_on) @@ -332,8 +332,8 @@ static int ade_crtc_enable_vblank(struct drm_crtc *crtc) static void ade_crtc_disable_vblank(struct drm_crtc *crtc) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; void __iomem *base = ctx->base; if (!ctx->power_on) { @@ -347,7 +347,7 @@ static void ade_crtc_disable_vblank(struct drm_crtc *crtc) static void drm_underflow_wq(struct work_struct *work) { - struct ade_crtc *acrtc = container_of(work, struct ade_crtc, + struct kirin_crtc *acrtc = container_of(work, struct kirin_crtc, display_reset_wq); struct drm_device *drm_dev = (&acrtc->base)->dev; struct drm_atomic_state *state; @@ -358,9 +358,9 @@ static void drm_underflow_wq(struct work_struct *work) static irqreturn_t ade_irq_handler(int irq, void *data) { - struct ade_crtc *acrtc = data; - struct ade_hw_ctx *ctx = acrtc->ctx; - struct drm_crtc *crtc = &acrtc->base; + struct kirin_crtc *kcrtc = data; + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; + struct drm_crtc *crtc = &kcrtc->base; void __iomem *base = ctx->base; u32 status; @@ -377,7 +377,7 @@ static irqreturn_t ade_irq_handler(int irq, void *data) ade_update_bits(base + LDI_INT_CLR, UNDERFLOW_INT_EN_OFST, MASK(1), 1); DRM_ERROR("LDI underflow!"); - schedule_work(&acrtc->display_reset_wq); + schedule_work(&kcrtc->display_reset_wq); } return IRQ_HANDLED; @@ -499,11 +499,11 @@ static void ade_dump_regs(void __iomem *base) { } static void ade_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; int ret; - if (acrtc->enable) + if (kcrtc->enable) return; if (!ctx->power_on) { @@ -516,27 +516,27 @@ static void ade_crtc_atomic_enable(struct drm_crtc *crtc, ade_display_enable(ctx); ade_dump_regs(ctx->base); drm_crtc_vblank_on(crtc); - acrtc->enable = true; + kcrtc->enable = true; } static void ade_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; - if (!acrtc->enable) + if (!kcrtc->enable) return; drm_crtc_vblank_off(crtc); ade_power_down(ctx); - acrtc->enable = false; + kcrtc->enable = false; } static void ade_crtc_mode_set_nofb(struct drm_crtc *crtc) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; struct drm_display_mode *mode = &crtc->state->mode; struct drm_display_mode *adj_mode = &crtc->state->adjusted_mode; @@ -548,8 +548,8 @@ static void ade_crtc_mode_set_nofb(struct drm_crtc *crtc) static void ade_crtc_atomic_begin(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; struct drm_display_mode *mode = &crtc->state->mode; struct drm_display_mode *adj_mode = &crtc->state->adjusted_mode; @@ -562,13 +562,13 @@ static void ade_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; struct drm_pending_vblank_event *event = crtc->state->event; void __iomem *base = ctx->base; /* only crtc is enabled regs take effect */ - if (acrtc->enable) { + if (kcrtc->enable) { ade_dump_regs(base); /* flush ade registers */ writel(ADE_ENABLE, base + ADE_EN); @@ -1007,7 +1007,7 @@ static int ade_drm_init(struct platform_device *pdev) struct drm_device *dev = platform_get_drvdata(pdev); struct ade_data *ade; struct ade_hw_ctx *ctx; - struct ade_crtc *acrtc; + struct kirin_crtc *kcrtc; struct kirin_plane *kplane; enum drm_plane_type type; int ret; @@ -1021,8 +1021,8 @@ static int ade_drm_init(struct platform_device *pdev) platform_set_drvdata(pdev, ade); ctx = &ade->ctx; - acrtc = &ade->acrtc; - acrtc->ctx = ctx; + kcrtc = &ade->crtc; + kcrtc->hw_ctx = ctx; ret = ade_dts_parse(pdev, ctx); if (ret) @@ -1046,15 +1046,15 @@ static int ade_drm_init(struct platform_device *pdev) } /* crtc init */ - ret = ade_crtc_init(dev, &acrtc->base, &ade->planes[PRIMARY_CH].base); + ret = ade_crtc_init(dev, &kcrtc->base, &ade->planes[PRIMARY_CH].base); if (ret) return ret; /* vblank irq init */ ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler, - IRQF_SHARED, dev->driver->name, acrtc); + IRQF_SHARED, dev->driver->name, kcrtc); - INIT_WORK(&acrtc->display_reset_wq, drm_underflow_wq); + INIT_WORK(&kcrtc->display_reset_wq, drm_underflow_wq); if (ret) return ret; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: John Stultz <john.stultz@linaro.org> To: lkml <linux-kernel@vger.kernel.org> Cc: Xu YiPing <xuyiping@hisilicon.com>, David Airlie <airlied@linux.ie>, dri-devel <dri-devel@lists.freedesktop.org>, Xinliang Liu <z.liuxinliang@hisilicon.com>, Rongrong Zou <zourongrong@gmail.com>, Sam Ravnborg <sam@ravnborg.org> Subject: [RESEND][PATCH v3 08/26] drm: kirin: Rename ade_crtc to kirin_crtc Date: Wed, 14 Aug 2019 18:46:44 +0000 [thread overview] Message-ID: <20190814184702.54275-9-john.stultz@linaro.org> (raw) In-Reply-To: <20190814184702.54275-1-john.stultz@linaro.org> From: Xu YiPing <xuyiping@hisilicon.com> As part of refactoring the kirin driver to better support different hardware revisions, this patch renames the struct ade_crtc to kirin_crtc. The struct kirin_crtc will later used by both kirin620 and future kirin960 driver, and will be moved to a common kirin_drm_drv.h in a future patch Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> [jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> --- .../gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 74 +++++++++---------- 1 file changed, 37 insertions(+), 37 deletions(-) diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c index c09040876e68..ee3dc3d0f738 100644 --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c @@ -38,8 +38,8 @@ #define OUT_OVLY ADE_OVLY2 /* output overlay compositor */ #define ADE_DEBUG 1 -#define to_ade_crtc(crtc) \ - container_of(crtc, struct ade_crtc, base) +#define to_kirin_crtc(crtc) \ + container_of(crtc, struct kirin_crtc, base) #define to_kirin_plane(plane) \ container_of(plane, struct kirin_plane, base) @@ -56,9 +56,9 @@ struct ade_hw_ctx { int irq; }; -struct ade_crtc { +struct kirin_crtc { struct drm_crtc base; - struct ade_hw_ctx *ctx; + void *hw_ctx; struct work_struct display_reset_wq; bool enable; }; @@ -70,7 +70,7 @@ struct kirin_plane { }; struct ade_data { - struct ade_crtc acrtc; + struct kirin_crtc crtc; struct kirin_plane planes[ADE_CH_NUM]; struct ade_hw_ctx ctx; }; @@ -184,8 +184,8 @@ static bool ade_crtc_mode_fixup(struct drm_crtc *crtc, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; adjusted_mode->clock = clk_round_rate(ctx->ade_pix_clk, mode->clock * 1000) / 1000; @@ -317,8 +317,8 @@ static void ade_set_medianoc_qos(struct ade_hw_ctx *ctx) static int ade_crtc_enable_vblank(struct drm_crtc *crtc) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; void __iomem *base = ctx->base; if (!ctx->power_on) @@ -332,8 +332,8 @@ static int ade_crtc_enable_vblank(struct drm_crtc *crtc) static void ade_crtc_disable_vblank(struct drm_crtc *crtc) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; void __iomem *base = ctx->base; if (!ctx->power_on) { @@ -347,7 +347,7 @@ static void ade_crtc_disable_vblank(struct drm_crtc *crtc) static void drm_underflow_wq(struct work_struct *work) { - struct ade_crtc *acrtc = container_of(work, struct ade_crtc, + struct kirin_crtc *acrtc = container_of(work, struct kirin_crtc, display_reset_wq); struct drm_device *drm_dev = (&acrtc->base)->dev; struct drm_atomic_state *state; @@ -358,9 +358,9 @@ static void drm_underflow_wq(struct work_struct *work) static irqreturn_t ade_irq_handler(int irq, void *data) { - struct ade_crtc *acrtc = data; - struct ade_hw_ctx *ctx = acrtc->ctx; - struct drm_crtc *crtc = &acrtc->base; + struct kirin_crtc *kcrtc = data; + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; + struct drm_crtc *crtc = &kcrtc->base; void __iomem *base = ctx->base; u32 status; @@ -377,7 +377,7 @@ static irqreturn_t ade_irq_handler(int irq, void *data) ade_update_bits(base + LDI_INT_CLR, UNDERFLOW_INT_EN_OFST, MASK(1), 1); DRM_ERROR("LDI underflow!"); - schedule_work(&acrtc->display_reset_wq); + schedule_work(&kcrtc->display_reset_wq); } return IRQ_HANDLED; @@ -499,11 +499,11 @@ static void ade_dump_regs(void __iomem *base) { } static void ade_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; int ret; - if (acrtc->enable) + if (kcrtc->enable) return; if (!ctx->power_on) { @@ -516,27 +516,27 @@ static void ade_crtc_atomic_enable(struct drm_crtc *crtc, ade_display_enable(ctx); ade_dump_regs(ctx->base); drm_crtc_vblank_on(crtc); - acrtc->enable = true; + kcrtc->enable = true; } static void ade_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; - if (!acrtc->enable) + if (!kcrtc->enable) return; drm_crtc_vblank_off(crtc); ade_power_down(ctx); - acrtc->enable = false; + kcrtc->enable = false; } static void ade_crtc_mode_set_nofb(struct drm_crtc *crtc) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; struct drm_display_mode *mode = &crtc->state->mode; struct drm_display_mode *adj_mode = &crtc->state->adjusted_mode; @@ -548,8 +548,8 @@ static void ade_crtc_mode_set_nofb(struct drm_crtc *crtc) static void ade_crtc_atomic_begin(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; struct drm_display_mode *mode = &crtc->state->mode; struct drm_display_mode *adj_mode = &crtc->state->adjusted_mode; @@ -562,13 +562,13 @@ static void ade_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct ade_crtc *acrtc = to_ade_crtc(crtc); - struct ade_hw_ctx *ctx = acrtc->ctx; + struct kirin_crtc *kcrtc = to_kirin_crtc(crtc); + struct ade_hw_ctx *ctx = kcrtc->hw_ctx; struct drm_pending_vblank_event *event = crtc->state->event; void __iomem *base = ctx->base; /* only crtc is enabled regs take effect */ - if (acrtc->enable) { + if (kcrtc->enable) { ade_dump_regs(base); /* flush ade registers */ writel(ADE_ENABLE, base + ADE_EN); @@ -1007,7 +1007,7 @@ static int ade_drm_init(struct platform_device *pdev) struct drm_device *dev = platform_get_drvdata(pdev); struct ade_data *ade; struct ade_hw_ctx *ctx; - struct ade_crtc *acrtc; + struct kirin_crtc *kcrtc; struct kirin_plane *kplane; enum drm_plane_type type; int ret; @@ -1021,8 +1021,8 @@ static int ade_drm_init(struct platform_device *pdev) platform_set_drvdata(pdev, ade); ctx = &ade->ctx; - acrtc = &ade->acrtc; - acrtc->ctx = ctx; + kcrtc = &ade->crtc; + kcrtc->hw_ctx = ctx; ret = ade_dts_parse(pdev, ctx); if (ret) @@ -1046,15 +1046,15 @@ static int ade_drm_init(struct platform_device *pdev) } /* crtc init */ - ret = ade_crtc_init(dev, &acrtc->base, &ade->planes[PRIMARY_CH].base); + ret = ade_crtc_init(dev, &kcrtc->base, &ade->planes[PRIMARY_CH].base); if (ret) return ret; /* vblank irq init */ ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler, - IRQF_SHARED, dev->driver->name, acrtc); + IRQF_SHARED, dev->driver->name, kcrtc); - INIT_WORK(&acrtc->display_reset_wq, drm_underflow_wq); + INIT_WORK(&kcrtc->display_reset_wq, drm_underflow_wq); if (ret) return ret; -- 2.17.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-08-14 18:48 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-14 18:46 [RESEND][PATCH v3 00/26] drm: Kirin driver cleanups to prep for Kirin960 support John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 01/26] drm: kirin: Fix for hikey620 display offset problem John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 02/26] drm: kirin: Get rid of drmP.h includes John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 03/26] drm: kirin: Remove HISI_KIRIN_DW_DSI config option John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 04/26] drm: kirin: Remove unreachable return John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 05/26] drm: kirin: Remove uncessary parameter indirection John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 06/26] drm: kirin: Remove out_format from ade_crtc John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 07/26] drm: kirin: Rename ade_plane to kirin_plane John Stultz 2019-08-14 18:46 ` John Stultz [this message] 2019-08-14 18:46 ` [RESEND][PATCH v3 08/26] drm: kirin: Rename ade_crtc to kirin_crtc John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 09/26] drm: kirin: Dynamically allocate the hw_ctx John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 10/26] drm: kirin: Move request irq handle in ade hw ctx alloc John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 11/26] drm: kirin: Move workqueue to ade_hw_ctx structure John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 12/26] drm: kirin: Move kirin_crtc, kirin_plane, kirin_format to kirin_drm_drv.h John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 13/26] drm: kirin: Reanme dc_ops to kirin_drm_data John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 14/26] drm: kirin: Move ade crtc/plane help functions to driver_data John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 15/26] drm: kirin: Move channel formats to driver data John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 16/26] drm: kirin: Move mode config function to driver_data John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 17/26] drm: kirin: Move plane number and primay plane in driver data John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 18/26] drm: kirin: Move config max_width and max_height to " John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 19/26] drm: kirin: Move drm driver " John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 20/26] drm: kirin: Add register connect helper functions in drm init John Stultz 2019-08-14 18:46 ` John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 21/26] drm: kirin: Rename plane_init and crtc_init John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 22/26] drm: kirin: Fix dev->driver_data setting John Stultz 2019-08-14 18:46 ` [RESEND][PATCH v3 23/26] drm: kirin: Make driver_data variable non-global John Stultz 2019-08-14 18:47 ` [RESEND][PATCH v3 24/26] drm: kirin: Add alloc_hw_ctx/clean_hw_ctx ops in driver data John Stultz 2019-08-14 18:47 ` [RESEND][PATCH v3 25/26] drm: kirin: Pass driver data to crtc init and plane init John Stultz 2019-08-14 18:47 ` [RESEND][PATCH v3 26/26] drm: kirin: Move ade drm init to kirin drm drv John Stultz 2019-08-14 19:45 ` [RESEND][PATCH v3 00/26] drm: Kirin driver cleanups to prep for Kirin960 support Sam Ravnborg 2019-08-14 19:45 ` Sam Ravnborg 2019-08-19 2:07 ` xinliang 2019-08-19 2:07 ` xinliang 2019-08-19 4:40 ` Sam Ravnborg 2019-08-19 4:40 ` Sam Ravnborg 2019-08-19 23:25 ` John Stultz
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190814184702.54275-9-john.stultz@linaro.org \ --to=john.stultz@linaro.org \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=sam@ravnborg.org \ --cc=xuyiping@hisilicon.com \ --cc=z.liuxinliang@hisilicon.com \ --cc=zourongrong@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.