From: Yinbo Zhu <yinbo.zhu@nxp.com> To: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: yinbo.zhu@nxp.com, xiaobo.xie@nxp.com, jiafei.pan@nxp.com, yangbo.lu@nxp.com, Ashish Kumar <Ashish.Kumar@nxp.com> Subject: [PATCH v5] arm64: dts: ls1028a: Add esdhc node in dts Date: Thu, 15 Aug 2019 11:39:01 +0800 [thread overview] Message-ID: <20190815033901.18696-1-yinbo.zhu@nxp.com> (raw) From: Ashish Kumar <Ashish.Kumar@nxp.com> This patch is to add esdhc node and enable SD UHS-I, eMMC HS200 for ls1028ardb/ls1028aqds board. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> --- Change in v5: Fix indent. arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 8 +++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 +++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 27 +++++++++++++++++++++++ 3 files changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index de6ef39..5e14e5a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -95,6 +95,14 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 9fb9113..1a69221 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -83,6 +83,19 @@ }; }; +&esdhc { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7975519..f299075 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -245,6 +245,33 @@ status = "disabled"; }; + esdhc: mmc@2140000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: mmc@2150000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + broken-cd; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; -- 2.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Yinbo Zhu <yinbo.zhu@nxp.com> To: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: jiafei.pan@nxp.com, yinbo.zhu@nxp.com, xiaobo.xie@nxp.com, Ashish Kumar <Ashish.Kumar@nxp.com>, yangbo.lu@nxp.com Subject: [PATCH v5] arm64: dts: ls1028a: Add esdhc node in dts Date: Thu, 15 Aug 2019 11:39:01 +0800 [thread overview] Message-ID: <20190815033901.18696-1-yinbo.zhu@nxp.com> (raw) From: Ashish Kumar <Ashish.Kumar@nxp.com> This patch is to add esdhc node and enable SD UHS-I, eMMC HS200 for ls1028ardb/ls1028aqds board. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> --- Change in v5: Fix indent. arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 8 +++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 +++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 27 +++++++++++++++++++++++ 3 files changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index de6ef39..5e14e5a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -95,6 +95,14 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 9fb9113..1a69221 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -83,6 +83,19 @@ }; }; +&esdhc { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7975519..f299075 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -245,6 +245,33 @@ status = "disabled"; }; + esdhc: mmc@2140000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: mmc@2150000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + broken-cd; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; -- 2.9.5 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-08-15 3:36 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-15 3:39 Yinbo Zhu [this message] 2019-08-15 3:39 ` [PATCH v5] arm64: dts: ls1028a: Add esdhc node in dts Yinbo Zhu 2019-08-19 13:10 ` Shawn Guo 2019-08-19 13:10 ` Shawn Guo 2019-09-24 3:02 ` [EXT] " Yinbo Zhu 2019-09-24 3:02 ` Yinbo Zhu 2019-09-24 3:02 ` Yinbo Zhu 2019-10-02 0:57 ` Shawn Guo 2019-10-02 0:57 ` Shawn Guo 2019-10-02 0:57 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190815033901.18696-1-yinbo.zhu@nxp.com \ --to=yinbo.zhu@nxp.com \ --cc=Ashish.Kumar@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=jiafei.pan@nxp.com \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=xiaobo.xie@nxp.com \ --cc=yangbo.lu@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.