From: Jiada Wang <jiada_wang@mentor.com> To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com> Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <jiada_wang@mentor.com>, <george_davis@mentor.com> Subject: [PATCH v1 37/63] input: atmel_mxt_ts: export GPIO reset line via sysfs Date: Fri, 16 Aug 2019 17:34:59 +0900 [thread overview] Message-ID: <20190816083525.19071-3-jiada_wang@mentor.com> (raw) In-Reply-To: <20190816083525.19071-1-jiada_wang@mentor.com> From: "George G. Davis" <george_davis@mentor.com> N.B. Modifying the atmel_mxt_ts GPIO reset line during operation will cause problems with normal driver operation. This feature is provided as a diagnostic debug aid. It does not take into consideration any pending operations which may be in progress. Modifying the atmel_mxt_ts GPIO reset line at any time will inevitably cause the driver to fail. Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Rajeev Kumar <rajeev_kumar@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> --- drivers/input/touchscreen/atmel_mxt_ts.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index a8e2b927bb12..def9f94d73ef 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -4240,6 +4240,19 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) return error; } + if (data->reset_gpio) { + error = gpiod_export(data->reset_gpio, 0); + if (error) + return error; + + error = gpiod_export_link(&client->dev, "reset", + data->reset_gpio); + if (error) { + gpiod_unexport(data->reset_gpio); + return error; + } + } + if (data->suspend_mode == MXT_SUSPEND_REGULATOR) { error = mxt_acquire_irq(data); if (error) @@ -4273,6 +4286,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) mxt_free_input_device(data); mxt_free_object_table(data); sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group); + if (data->reset_gpio) { + sysfs_remove_link(&client->dev.kobj, "reset"); + gpiod_unexport(data->reset_gpio); + } return error; } @@ -4282,6 +4299,10 @@ static int mxt_remove(struct i2c_client *client) disable_irq(data->irq); sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group); + if (data->reset_gpio) { + sysfs_remove_link(&client->dev.kobj, "reset"); + gpiod_unexport(data->reset_gpio); + } mxt_debug_msg_remove(data); mxt_sysfs_remove(data); mxt_free_input_device(data); -- 2.19.2
WARNING: multiple messages have this Message-ID (diff)
From: Jiada Wang <jiada_wang@mentor.com> To: nick@shmanahar.org, dmitry.torokhov@gmail.com Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, jiada_wang@mentor.com, george_davis@mentor.com Subject: [PATCH v1 37/63] input: atmel_mxt_ts: export GPIO reset line via sysfs Date: Fri, 16 Aug 2019 17:34:59 +0900 [thread overview] Message-ID: <20190816083525.19071-3-jiada_wang@mentor.com> (raw) In-Reply-To: <20190816083525.19071-1-jiada_wang@mentor.com> From: "George G. Davis" <george_davis@mentor.com> N.B. Modifying the atmel_mxt_ts GPIO reset line during operation will cause problems with normal driver operation. This feature is provided as a diagnostic debug aid. It does not take into consideration any pending operations which may be in progress. Modifying the atmel_mxt_ts GPIO reset line at any time will inevitably cause the driver to fail. Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Rajeev Kumar <rajeev_kumar@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> --- drivers/input/touchscreen/atmel_mxt_ts.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index a8e2b927bb12..def9f94d73ef 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -4240,6 +4240,19 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) return error; } + if (data->reset_gpio) { + error = gpiod_export(data->reset_gpio, 0); + if (error) + return error; + + error = gpiod_export_link(&client->dev, "reset", + data->reset_gpio); + if (error) { + gpiod_unexport(data->reset_gpio); + return error; + } + } + if (data->suspend_mode == MXT_SUSPEND_REGULATOR) { error = mxt_acquire_irq(data); if (error) @@ -4273,6 +4286,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) mxt_free_input_device(data); mxt_free_object_table(data); sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group); + if (data->reset_gpio) { + sysfs_remove_link(&client->dev.kobj, "reset"); + gpiod_unexport(data->reset_gpio); + } return error; } @@ -4282,6 +4299,10 @@ static int mxt_remove(struct i2c_client *client) disable_irq(data->irq); sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group); + if (data->reset_gpio) { + sysfs_remove_link(&client->dev.kobj, "reset"); + gpiod_unexport(data->reset_gpio); + } mxt_debug_msg_remove(data); mxt_sysfs_remove(data); mxt_free_input_device(data); -- 2.19.2
next prev parent reply other threads:[~2019-08-16 8:40 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-16 8:34 [PATCH v1 35/63] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang 2019-08-16 8:34 ` Jiada Wang 2019-08-16 8:34 ` [PATCH v1 36/63] Input: atmel_mxt_ts - configure and use gpios as real gpios Jiada Wang 2019-08-16 8:34 ` Jiada Wang 2019-08-16 17:24 ` Dmitry Torokhov 2019-08-23 5:16 ` Jiada Wang 2019-08-23 5:16 ` Jiada Wang 2019-08-16 8:34 ` Jiada Wang [this message] 2019-08-16 8:34 ` [PATCH v1 37/63] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang 2019-08-16 8:35 ` [PATCH v1 38/63] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang 2019-08-16 8:35 ` Jiada Wang 2019-08-16 8:35 ` [PATCH v1 39/63] Input: touchscreen: Atmel: Add device tree support for T15 key array objects Jiada Wang 2019-08-16 8:35 ` Jiada Wang 2019-08-16 17:25 ` Dmitry Torokhov 2019-08-22 7:57 ` Jiada Wang 2019-08-22 7:57 ` Jiada Wang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190816083525.19071-3-jiada_wang@mentor.com \ --to=jiada_wang@mentor.com \ --cc=dmitry.torokhov@gmail.com \ --cc=george_davis@mentor.com \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nick@shmanahar.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.