All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Niklas Cassel <niklas.cassel@linaro.org>
Subject: [PATCH v4 4/8] arm64: dts: qcom: pm8150l: Add base dts file
Date: Thu, 22 Aug 2019 00:12:35 +0530	[thread overview]
Message-ID: <20190821184239.12364-5-vkoul@kernel.org> (raw)
In-Reply-To: <20190821184239.12364-1-vkoul@kernel.org>

PMIC pm8150l is a slave pmic and this adds base DTS file for pm8150l
with power-on, adc and gpio nodes

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 80 +++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8150l.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
new file mode 100644
index 000000000000..eb0e9a090e42
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@4 {
+		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power-on@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			status = "disabled";
+
+			ref-gnd@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			vref-1p25@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			die-temp@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pm8150l_gpios: gpio@c000 {
+			compatible = "qcom,pm8150l-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xca 0x0 IRQ_TYPE_NONE>,
+				     <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pmic@5 {
+		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
-- 
2.20.1


  parent reply	other threads:[~2019-08-21 18:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 18:42 [PATCH v4 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Vinod Koul
2019-08-21 18:42 ` [PATCH v4 1/8] arm64: dts: qcom: sm8150: Add base dts file Vinod Koul
2019-08-21 19:07   ` Amit Kucheria
2019-08-21 19:07     ` Amit Kucheria
2019-08-21 18:42 ` [PATCH v4 2/8] arm64: dts: qcom: pm8150: " Vinod Koul
2019-08-21 18:42 ` [PATCH v4 3/8] arm64: dts: qcom: pm8150b: " Vinod Koul
2019-08-21 18:42 ` Vinod Koul [this message]
2019-08-21 18:42 ` [PATCH v4 5/8] arm64: dts: qcom: sm8150-mtp: " Vinod Koul
2019-08-21 18:42 ` [PATCH v4 6/8] arm64: dts: qcom: sm8150-mtp: Add regulators Vinod Koul
2019-08-23  6:05   ` kgunda
2019-08-27 15:23     ` kgunda
2019-08-21 18:42 ` [PATCH v4 7/8] arm64: dts: qcom: sm8150: Add reserved-memory regions Vinod Koul
2019-08-21 18:42 ` [PATCH v4 8/8] arm64: dts: qcom: sm8150: Add apps shared nodes Vinod Koul
2019-08-21 23:04 ` [PATCH v4 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821184239.12364-5-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=niklas.cassel@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.