[PATCH v2 3/5] arm64: meson-g12: add Everything-Else power domain controller

[Neil Armstrong <narmstrong@baylibre.com>]

Replace the VPU-centric power domain controller by the generic system-wide
Everything-Else power domain controller and setup the right power-domains
properties on the VPU, Ethernet & USB nodes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-g12-common.dtsi    | 92 ++++++++++---------
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi   |  9 ++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi   |  9 ++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    | 15 ++-
 4 files changed, 77 insertions(+), 48 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index a921d6334e5b..8baa6318f180 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1426,6 +1426,53 @@
 						clocks = <&xtal>;
 						clock-names = "xtal";
 					};
+
+					pwrc: power-controller {
+						compatible = "amlogic,meson-g12a-pwrc";
+						#power-domain-cells = <1>;
+						amlogic,ao-sysctrl = <&rti>;
+						resets = <&reset RESET_VIU>,
+							 <&reset RESET_VENC>,
+							 <&reset RESET_VCBUS>,
+							 <&reset RESET_BT656>,
+							 <&reset RESET_RDMA>,
+							 <&reset RESET_VENCI>,
+							 <&reset RESET_VENCP>,
+							 <&reset RESET_VDAC>,
+							 <&reset RESET_VDI6>,
+							 <&reset RESET_VENCL>,
+							 <&reset RESET_VID_LOCK>;
+						reset-names = "viu", "venc", "vcbus", "bt656",
+							      "rdma", "venci", "vencp", "vdac",
+							      "vdi6", "vencl", "vid_lock";
+						clocks = <&clkc CLKID_VPU>,
+							 <&clkc CLKID_VAPB>;
+						clock-names = "vpu", "vapb";
+						/*
+						 * VPU clocking is provided by two identical clock paths
+						 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+						 * free mux to safely change frequency while running.
+						 * Same for VAPB but with a final gate after the glitch free mux.
+						 */
+						assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+								  <&clkc CLKID_VPU_0>,
+								  <&clkc CLKID_VPU>, /* Glitch free mux */
+								  <&clkc CLKID_VAPB_0_SEL>,
+								  <&clkc CLKID_VAPB_0>,
+								  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+						assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VPU_0>,
+									 <&clkc CLKID_FCLK_DIV4>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VAPB_0>;
+						assigned-clock-rates = <0>, /* Do Nothing */
+								       <666666666>,
+								       <0>, /* Do Nothing */
+								       <0>, /* Do Nothing */
+								       <250000000>,
+								       <0>; /* Do Nothing */
+					};
 				};
 			};
 
@@ -1773,50 +1820,6 @@
 					clock-names = "xtal", "mpeg-clk";
 				};
 
-				pwrc_vpu: power-controller-vpu {
-					compatible = "amlogic,meson-g12a-pwrc-vpu";
-					#power-domain-cells = <0>;
-					amlogic,hhi-sysctrl = <&hhi>;
-					resets = <&reset RESET_VIU>,
-						 <&reset RESET_VENC>,
-						 <&reset RESET_VCBUS>,
-						 <&reset RESET_BT656>,
-						 <&reset RESET_RDMA>,
-						 <&reset RESET_VENCI>,
-						 <&reset RESET_VENCP>,
-						 <&reset RESET_VDAC>,
-						 <&reset RESET_VDI6>,
-						 <&reset RESET_VENCL>,
-						 <&reset RESET_VID_LOCK>;
-					clocks = <&clkc CLKID_VPU>,
-						 <&clkc CLKID_VAPB>;
-					clock-names = "vpu", "vapb";
-					/*
-					 * VPU clocking is provided by two identical clock paths
-					 * VPU_0 and VPU_1 muxed to a single clock by a glitch
-					 * free mux to safely change frequency while running.
-					 * Same for VAPB but with a final gate after the glitch free mux.
-					 */
-					assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
-							  <&clkc CLKID_VPU_0>,
-							  <&clkc CLKID_VPU>, /* Glitch free mux */
-							  <&clkc CLKID_VAPB_0_SEL>,
-							  <&clkc CLKID_VAPB_0>,
-							  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
-					assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-								 <0>, /* Do Nothing */
-								 <&clkc CLKID_VPU_0>,
-								 <&clkc CLKID_FCLK_DIV4>,
-								 <0>, /* Do Nothing */
-								 <&clkc CLKID_VAPB_0>;
-					assigned-clock-rates = <0>, /* Do Nothing */
-							       <666666666>,
-							       <0>, /* Do Nothing */
-							       <0>, /* Do Nothing */
-							       <250000000>,
-							       <0>; /* Do Nothing */
-				};
-
 				ao_pinctrl: pinctrl@14 {
 					compatible = "amlogic,meson-g12a-aobus-pinctrl";
 					#address-cells = <2>;
@@ -2169,7 +2172,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			amlogic,canvas = <&canvas>;
-			power-domains = <&pwrc_vpu>;
 
 			/* CVBS VDAC output port */
 			cvbs_vdac_port: port@0 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 733a9d46fc4b..eb5d177d7a99 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-g12a-power.h>
 
 / {
 	compatible = "amlogic,g12a";
@@ -110,6 +111,14 @@
 	};
 };
 
+&ethmac {
+	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &sd_emmc_a {
 	amlogic,dram-access-quirk;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index d5edbc1a1991..5628ccd54531 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-g12a-power.h>
 
 / {
 	compatible = "amlogic,g12b";
@@ -101,6 +102,14 @@
 	compatible = "amlogic,g12b-clkc";
 };
 
+&ethmac {
+	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &sd_emmc_a {
 	amlogic,dram-access-quirk;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index e902d4f9165f..37064d7f66c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-sm1-power.h>
 
 / {
 	compatible = "amlogic,sm1";
@@ -59,10 +60,18 @@
 	compatible = "amlogic,meson-sm1-clk-measure";
 };
 
-&pwrc_vpu {
-	status = "disabled";
+&ethmac {
+	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
+};
+
+&pwrc {
+	compatible = "amlogic,meson-sm1-pwrc";
 };
 
 &vpu {
-	status = "disabled";
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&usb {
+	power-domains = <&pwrc PWRC_SM1_USB_ID>;
 };
-- 
2.22.0