From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, ulf.hansson@linaro.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-pm@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: add USB support
Date: Fri, 23 Aug 2019 11:04:18 +0200 [thread overview]
Message-ID: <20190823090418.17148-6-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190823090418.17148-1-narmstrong@baylibre.com>
Add the USB properties for the Amlogic SM1 Based SEI610 Board in order to
support the USB DRD Type-C port and the USB3 Type A port.
The USB DRD Type-C controller uses the ID signal to toggle the USB role
between the DWC3 Host controller and the DWC2 Device controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 66bd3bfbaf91..36ac2e4b970d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -321,3 +321,8 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, ulf.hansson@linaro.org
Cc: linux-amlogic@lists.infradead.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: add USB support
Date: Fri, 23 Aug 2019 11:04:18 +0200 [thread overview]
Message-ID: <20190823090418.17148-6-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190823090418.17148-1-narmstrong@baylibre.com>
Add the USB properties for the Amlogic SM1 Based SEI610 Board in order to
support the USB DRD Type-C port and the USB3 Type A port.
The USB DRD Type-C controller uses the ID signal to toggle the USB role
between the DWC3 Host controller and the DWC2 Device controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 66bd3bfbaf91..36ac2e4b970d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -321,3 +321,8 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, ulf.hansson@linaro.org
Cc: linux-amlogic@lists.infradead.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: add USB support
Date: Fri, 23 Aug 2019 11:04:18 +0200 [thread overview]
Message-ID: <20190823090418.17148-6-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190823090418.17148-1-narmstrong@baylibre.com>
Add the USB properties for the Amlogic SM1 Based SEI610 Board in order to
support the USB DRD Type-C port and the USB3 Type A port.
The USB DRD Type-C controller uses the ID signal to toggle the USB role
between the DWC3 Host controller and the DWC2 Device controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 66bd3bfbaf91..36ac2e4b970d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -321,3 +321,8 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-08-23 9:04 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 9:04 [PATCH v2 0/5] arm64: meson: add support for SM1 Power Domains Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` [PATCH v2 1/5] dt-bindings: power: add Amlogic Everything-Else power domains bindings Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` [PATCH v2 2/5] soc: amlogic: Add support for Everything-Else power domains controller Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-25 21:10 ` Martin Blumenstingl
2019-08-25 21:10 ` Martin Blumenstingl
2019-08-25 21:10 ` Martin Blumenstingl
2019-08-26 8:10 ` Neil Armstrong
2019-08-26 8:10 ` Neil Armstrong
2019-08-26 8:10 ` Neil Armstrong
2019-08-26 22:40 ` Martin Blumenstingl
2019-08-26 22:40 ` Martin Blumenstingl
2019-08-26 22:40 ` Martin Blumenstingl
2019-08-27 10:11 ` Neil Armstrong
2019-08-27 10:11 ` Neil Armstrong
2019-08-27 10:11 ` Neil Armstrong
2019-08-27 22:20 ` Kevin Hilman
2019-08-27 22:20 ` Kevin Hilman
2019-08-27 22:20 ` Kevin Hilman
2019-08-23 9:04 ` [PATCH v2 3/5] arm64: meson-g12: add Everything-Else power domain controller Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` [PATCH v2 4/5] arm64: dts: meson-sm1-sei610: add HDMI display support Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-25 20:00 ` Martin Blumenstingl
2019-08-25 20:00 ` Martin Blumenstingl
2019-08-25 20:00 ` Martin Blumenstingl
2019-08-23 9:04 ` Neil Armstrong [this message]
2019-08-23 9:04 ` [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: add USB support Neil Armstrong
2019-08-23 9:04 ` Neil Armstrong
2019-08-25 19:59 ` Martin Blumenstingl
2019-08-25 19:59 ` Martin Blumenstingl
2019-08-25 19:59 ` Martin Blumenstingl
2019-08-27 22:21 ` [PATCH v2 0/5] arm64: meson: add support for SM1 Power Domains Kevin Hilman
2019-08-27 22:21 ` Kevin Hilman
2019-08-27 22:21 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190823090418.17148-6-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.