All of lore.kernel.org
 help / color / mirror / Atom feed
From: Govind Singh <govinds@codeaurora.org>
To: sboyd@kernel.org, robh@kernel.org
Cc: bjorn.andersson@linaro.org, linux-arm-msm@vger.kernel.org,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-soc@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	Govind Singh <govinds@codeaurora.org>
Subject: [PATCH_v3 2/2] clk: qcom: Add Q6SSTOP clock controller for QCS404
Date: Fri, 23 Aug 2019 18:44:01 +0530	[thread overview]
Message-ID: <20190823131401.4011-3-govinds@codeaurora.org> (raw)
In-Reply-To: <20190823131401.4011-1-govinds@codeaurora.org>

Add support for the Q6SSTOP clock control used on qcs404
based devices. This would allow wcss remoteproc driver to
control the required WCSS Q6SSTOP clock/reset controls to
bring the subsystem out of reset and shutdown the WCSS Q6DSP.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 drivers/clk/qcom/Kconfig                      |   8 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/q6sstop-qcs404.c             | 223 ++++++++++++++++++
 .../dt-bindings/clock/qcom,q6sstopcc-qcs404.h |  18 ++
 4 files changed, 250 insertions(+)
 create mode 100644 drivers/clk/qcom/q6sstop-qcs404.c
 create mode 100644 include/dt-bindings/clock/qcom,q6sstopcc-qcs404.h

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index e1ff83cc361e..1b3c87a97521 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -250,6 +250,14 @@ config QCS_TURING_404
 	  Support for the Turing Clock Controller on QCS404, provides clocks
 	  and resets for the Turing subsystem.
 
+config QCS_Q6SSTOP_404
+	tristate "QCS404 Q6SSTOP Clock Controller"
+	select QCS_GCC_404
+	help
+	  Support for the Q6SSTOP clock controller on QCS404 devices.
+	  Say Y if you want to use the Q6SSTOP branch clocks of the WCSS clock
+	  controller to reset the Q6SSTOP subsystem.
+
 config SDM_GCC_845
 	tristate "SDM845 Global Clock Controller"
 	select QCOM_GDSC
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index f0768fb1f037..086c053e0e03 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
 obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
 obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o
 obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
+obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
 obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
 obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
diff --git a/drivers/clk/qcom/q6sstop-qcs404.c b/drivers/clk/qcom/q6sstop-qcs404.c
new file mode 100644
index 000000000000..b0f54a4c9365
--- /dev/null
+++ b/drivers/clk/qcom/q6sstop-qcs404.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,q6sstopcc-qcs404.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+#include "reset.h"
+
+static struct clk_branch lcc_ahbfabric_cbc_clk = {
+	.halt_reg = 0x1b004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1b004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lcc_ahbfabric_cbc_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lcc_q6ss_ahbs_cbc_clk = {
+	.halt_reg = 0x22000,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x22000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lcc_q6ss_ahbs_cbc_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lcc_q6ss_tcm_slave_cbc_clk = {
+	.halt_reg = 0x1c000,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x1c000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lcc_q6ss_tcm_slave_cbc_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lcc_q6ss_ahbm_cbc_clk = {
+	.halt_reg = 0x22004,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x22004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lcc_q6ss_ahbm_cbc_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lcc_q6ss_axim_cbc_clk = {
+	.halt_reg = 0x1c004,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x1c004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lcc_q6ss_axim_cbc_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lcc_q6ss_bcr_sleep_clk = {
+	.halt_reg = 0x6004,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x6004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lcc_q6ss_bcr_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+/* TCSR clock */
+static struct clk_branch tcsr_lcc_csr_cbcr_clk = {
+	.halt_reg = 0x8008,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x8008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_lcc_csr_cbcr_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct regmap_config q6sstop_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+};
+
+static struct clk_regmap *q6sstop_qcs404_clocks[] = {
+	[LCC_AHBFABRIC_CBC_CLK] = &lcc_ahbfabric_cbc_clk.clkr,
+	[LCC_Q6SS_AHBS_CBC_CLK] = &lcc_q6ss_ahbs_cbc_clk.clkr,
+	[LCC_Q6SS_TCM_SLAVE_CBC_CLK] = &lcc_q6ss_tcm_slave_cbc_clk.clkr,
+	[LCC_Q6SS_AHBM_CBC_CLK] = &lcc_q6ss_ahbm_cbc_clk.clkr,
+	[LCC_Q6SS_AXIM_CBC_CLK] = &lcc_q6ss_axim_cbc_clk.clkr,
+	[LCC_Q6SS_BCR_SLEEP_CLK] = &lcc_q6ss_bcr_sleep_clk.clkr,
+};
+
+static const struct qcom_reset_map q6sstop_qcs404_resets[] = {
+	[Q6SSTOP_BCR_RESET] = { 0x6000 },
+};
+
+static const struct qcom_cc_desc q6sstop_qcs404_desc = {
+	.config = &q6sstop_regmap_config,
+	.clks = q6sstop_qcs404_clocks,
+	.num_clks = ARRAY_SIZE(q6sstop_qcs404_clocks),
+	.resets = q6sstop_qcs404_resets,
+	.num_resets = ARRAY_SIZE(q6sstop_qcs404_resets),
+};
+
+static struct clk_regmap *tcsr_qcs404_clocks[] = {
+	[TCSR_Q6SS_LCC_CBCR_CLK] = &tcsr_lcc_csr_cbcr_clk.clkr,
+};
+
+static const struct qcom_cc_desc tcsr_qcs404_desc = {
+	.config = &q6sstop_regmap_config,
+	.clks = tcsr_qcs404_clocks,
+	.num_clks = ARRAY_SIZE(tcsr_qcs404_clocks),
+};
+
+static const struct of_device_id q6sstopcc_qcs404_match_table[] = {
+	{ .compatible = "qcom,qcs404-q6sstopcc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, q6sstopcc_qcs404_match_table);
+
+static int q6sstopcc_qcs404_probe(struct platform_device *pdev)
+{
+	const struct qcom_cc_desc *desc;
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_clk_create(&pdev->dev);
+	if (ret)
+		goto disable_pm_runtime;
+
+	ret = pm_clk_add(&pdev->dev, NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire iface clock\n");
+		goto destroy_pm_clk;
+	}
+
+	q6sstop_regmap_config.name = "q6sstop_tcsr";
+	desc = &tcsr_qcs404_desc;
+
+	ret = qcom_cc_probe_by_index(pdev, 1, desc);
+	if (ret)
+		goto destroy_pm_clk;
+
+	q6sstop_regmap_config.name = "q6sstop_cc";
+	desc = &q6sstop_qcs404_desc;
+
+	ret = qcom_cc_probe_by_index(pdev, 0, desc);
+	if (ret)
+		goto destroy_pm_clk;
+
+	return 0;
+
+destroy_pm_clk:
+	pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int q6sstopcc_qcs404_remove(struct platform_device *pdev)
+{
+	pm_clk_destroy(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops q6sstopcc_pm_ops = {
+	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static struct platform_driver q6sstopcc_qcs404_driver = {
+	.probe		= q6sstopcc_qcs404_probe,
+	.remove		= q6sstopcc_qcs404_remove,
+	.driver		= {
+		.name	= "qcs404-q6sstopcc",
+		.of_match_table = q6sstopcc_qcs404_match_table,
+		.pm = &q6sstopcc_pm_ops,
+	},
+};
+
+module_platform_driver(q6sstopcc_qcs404_driver);
+
+MODULE_DESCRIPTION("QTI QCS404 Q6SSTOP Clock Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/clock/qcom,q6sstopcc-qcs404.h b/include/dt-bindings/clock/qcom,q6sstopcc-qcs404.h
new file mode 100644
index 000000000000..c6f5290f0914
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,q6sstopcc-qcs404.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_Q6SSTOP_QCS404_H
+#define _DT_BINDINGS_CLK_Q6SSTOP_QCS404_H
+
+#define LCC_AHBFABRIC_CBC_CLK			0
+#define LCC_Q6SS_AHBS_CBC_CLK			1
+#define LCC_Q6SS_TCM_SLAVE_CBC_CLK		2
+#define LCC_Q6SS_AHBM_CBC_CLK			3
+#define LCC_Q6SS_AXIM_CBC_CLK			4
+#define LCC_Q6SS_BCR_SLEEP_CLK			5
+#define TCSR_Q6SS_LCC_CBCR_CLK			6
+
+#define Q6SSTOP_BCR_RESET			1
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

      parent reply	other threads:[~2019-08-23 13:14 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23 13:13 [PATCH_v3 0/2] Add Q6SSTOP clock controller for QCS404 Govind Singh
2019-08-23 13:14 ` [PATCH_v3 1/2] dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings Govind Singh
2019-08-27 12:27   ` Rob Herring
2019-08-27 12:27     ` Rob Herring
2019-09-06 20:31     ` Stephen Boyd
2019-09-06 20:31       ` Stephen Boyd
2019-10-11 13:35       ` Govind Singh
2019-10-11 13:35         ` Govind Singh
2019-08-23 13:14 ` Govind Singh [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190823131401.4011-3-govinds@codeaurora.org \
    --to=govinds@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.